Marcus,
seems i have done.
I have opened GEDIT and pasted 1 line at time.
Now I see it like this:
1 SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb56" MODE:="0666" SUBSYSTEMS=="usb"
2 ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb31" MODE:="0666"
3 KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="fb56", MODE="0666"
4 KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="fb31", MODE="0666"
I mean it has added the progressive number on each line. Hope it is normal
Then I have saved the file in:
etc/udev/rules.d/
And I gave as the name of the file:
fcdproplus.rules.
Is it correct the procedure?
Then I have rebooted the machine.
I have loaded the gnuradio and opened the GRC file but I always see the fcdproplus missing block.
Please any help??????
Thanks
73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
*********************************
****** GSM +39 328 7110193 ******
***** SMS +39 328 7110193 *****
*********************************
> -----Messaggio originale-----
> Da: Marcus Müller <address@hidden>
> Inviato: lunedì 27 aprile 2020 19:16
> A: Vincenzo Mone <address@hidden>
> Cc: Gnuradio Mailing List <address@hidden>
> Oggetto: Re: R: R: R: Mpir Installation
>
> No command. You need to make a text file, just as I wrote... I give up.
>
> Best regards,
> Marcus
>
> On 27/04/2020 19.12, Vincenzo Mone wrote:
> > OK Marcus,
> > I am adding when I reply the Maling list in the CC field. Hope it is correct.
> > Please which is the correct command to make the UDEV Rules?
> > Thanks
> >
> >
> > 73 de Enzo IK8OZV
> > EasyLog 5 BetaTester
> > EasyLog PDA BetaTester
> > WinBollet BetaTester
> > D.C.I. CheckPoint Regione Campania
> > Skype: ik8ozv8520
> >
> >
> >
> >
> > *********************************
> > ****** GSM +39 328 7110193 ******
> > ***** SMS +39 328 7110193 *****
> > *********************************
> >
> >> -----Messaggio originale-----
> >> Da: Marcus Müller <address@hidden>
> >> Inviato: lunedì 27 aprile 2020 19:03
> >> A: Vincenzo Mone <address@hidden>
> >> Cc: Gnuradio Mailing List <address@hidden>
> >> Oggetto: Re: R: R: Mpir Installation
> >>
> >> Vincenzo,
> >>
> >> On 27/04/2020 18.54, Vincenzo Mone wrote:
> >>> Marcus,
> >>> apologise I have asked you also in a previous message: Please how to do
> to
> >> reply via the mailing list?
> >>> I am using just the reply button and I understood it is wrong.
> >>> Please point me to the right way.
> >>
> >> I literally did in my last email.
> >>
> >>> Coming back to the gnuradio OK I am using the 3.8 but if you see on the
> >> mailing list, I have
> >>> Put several messages as I still cannot getting work the FCDPRPLUS.
> >>> I can read from the FCDPROPLUS Readme this and maybe it does not
> work:
> >>
> >>>
> >>> Don't forget the udev rules: For instance:
> >>
> >> You'll find these udev rules have nothing to do with GNU Radio 3.7 or 3.8.
> >>
> >>> Please can you tell me what to do?
> >>
> >> A udev rule is a text file that tells your operating system what to do
> >> when a new device appears, e.g. when a new USB device gets connected.
> >>
> >> You need to make a file in /etc/udev/rules.d/ , e.g.
> >> /etc/udev/rules.d/fcdproplus.rules, and it needs to contain the four lines
> >>
> >> SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8"
> ATTRS{idProduct}=="fb56"
> >> MODE:="0666"
> >> SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8"
> ATTRS{idProduct}=="fb31"
> >> MODE:="0666"
> >>
> >> KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
> >> ATTRS{idProduct}=="fb56", MODE="0666"
> >> KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
> >> ATTRS{idProduct}=="fb31", MODE="0666"
> >>
> >> after you've made that file, reboot. That's all.
> >>
> >> Best regards,
> >> Marcus
> >
> >