Re: [Dvdrtools-users] Help with DVD-R and Sony DRU 500 AX

[Robert M. Stockmann]

On 15 Apr 2003, scott wrote:

Hi Scott,

As a test you can try the following :

1. You might try a patched version of cdrtools-2.0 from schily.
   This version has unrestricted DVD-R(W) support. One can find it on

        ftp://ftp.crashrecovery.org/pub/linux/cdrtools/

   i use this version all the time with my Pioneer DVR-A05 4x DVD-R(W)
   burner. 

2. You can also try to use a binary only version which does DVD-R(W)'s. Its 
   called cdrecord-prodvd. There's a key which needs to be loaded into you
   shell environment before using cdrecord-prodvd :

CDR_SECURITY=8:dvd,clone,lowspeed:sparc-sun-solaris2,i386-pc-solaris2,i586-pc-li
nux,powerpc-apple,hppa,powerpc-ibm-aix,i386-unknown-freebsd,i386-unknown-openbsd
,i386-pc-bsdi,mips-sgi-irix,i386-pc-sco:1.11::1060000000:::private/research/educ
ational_non-commercial_use:2cYpgwkzDUMuGKCsVC6GKCPAzacxjmfvy1HGARNvns6KuGaaEGDNC
HrMsn7

If you don't load this key you won't be able to burn DVD-R iso's beyond
the size of 1024 Mb. cdrecord-prodvd can be downloaded from :

        ftp://ftp.berlios.de/pub/cdrecord/ProDVD

Regards,

Robert

> I'm having the same problem as some other people with my new Sony
> burner.  I have tried with dma on and off, the burner is on /dev/hdd
> with the ide-scsi module.  Heres what I get:
> 
> bash-2.05# dvdrecord dev=0,0 speed=1 -dao dvdimage
> dvdrtools v0.1.4
> Portions (c) 2002-2003 Ark Linux <address@hidden>
> Based on:
> Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg
> Schilling
> scsidev: '0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'bero-0.5a'
> dvdrecord: Warning: using inofficial version of libscg (bero-0.5a
> '@(#)scsitransp.c     1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
> Device type    : Removable CD-ROM
> Version: 0
> Response Format: 2
> Capabilities: 
> Vendor_info: 'SONY    '
> Identifikation: 'DVD RW DRU-500A '
> Revision: '2.0c'
> Device seems to be: Generic mmc2 DVD.
> Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> Driver flags   : SWABAUDIO BURNFREE 
> Supported modes: PACKET SAO
> Starting to write CD/DVD at speed 1 in write mode for single session.
> Last chance to quit, starting real write in 0 seconds. Operation starts.
> trackno=0
> dvdrecord: Input/output error. write_g1: scsi sendcmd: no error
> CDB:  2A 00 00 00 35 36 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 2C 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> Sense flags: Blk 0 (not valid) 
> cmd finished after 0.005s timeout 200s
> write track data: error after 0 bytes
> Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
> 
> I understand I can use growisofs directlty, but what do I need to link
> it with, I get:
> 
> 
> /tmp/ccqioDrh.o: In function `setup_C_parm':
> /tmp/ccqioDrh.o(.text+0x2e8): undefined reference to
> `plusminus_r_C_parm'
> /tmp/ccqioDrh.o: In function `builtin_dd':
> /tmp/ccqioDrh.o(.text+0x452): undefined reference to `get_capacity'
> /tmp/ccqioDrh.o(.text+0xa8b): undefined reference to
> `minus_rw_quickgrow'
> /tmp/ccqioDrh.o: In function `main':
> /tmp/ccqioDrh.o(.text+0x16c3): undefined reference to `media_reload'
> /tmp/ccqioDrh.o(.text+0x1869): undefined reference to `get_mmc_profile'
> /tmp/ccqioDrh.o(.text+0x1e1f): undefined reference to `fumount'
> /tmp/ccqioDrh.o(.text+0x1ed8): undefined reference to
> `poor_mans_pwrite64'
> /tmp/ccqioDrh.o(.text+0x1ef7): undefined reference to
> `plus_rw_restart_format'
> /tmp/ccqioDrh.o(.text+0x1efe): undefined reference to `plus_rw_finalize'
> /tmp/ccqioDrh.o(.text+0x1f0b): undefined reference to `plus_rw_finalize'
> /tmp/ccqioDrh.o(.text+0x1f1f): undefined reference to `plus_rw_finalize'
> /tmp/ccqioDrh.o(.text+0x1f33): undefined reference to `plus_rw_finalize'
> /tmp/ccqioDrh.o(.text+0x1f47): undefined reference to `plus_rw_finalize'
> /tmp/ccqioDrh.o(.text+0x1f68): undefined reference to `plus_r_finalize'
> /tmp/ccqioDrh.o(.text+0x1f75): undefined reference to `plus_r_finalize'
> /tmp/ccqioDrh.o(.text+0x1f89): undefined reference to `plus_r_finalize'
> ......
> 
> 
> 
> 
> 

-- 
Robert M. Stockmann - RHCE
Network Engineer - UNIX Consultant
crashrecovery.org  address@hidden