gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

problems with 3310


From: mspattnaik
Subject: problems with 3310
Date: Tue, 04 Feb 2003 19:11:58 +0530

Hi all
   here is the same problems that Mr.Michael Zell had got and posted on Tue, 29 
Oct 2002 21:36:28 +0100.but couldn't get any satisfactory solutions,it has been 
adviced by Pkot to check the data cable,but dear sir please let me know how to 
check whether the cable is working fine or not?here i am stating the problem 

GNOKII Version 0.5.0pre
cfg_read_file - open /root/.gnokiirc: No such file or directory
Opened configuration file /etc/gnokiirc
Added new section global
Adding key/value port//dev/ttyS0
Adding key/value model/3310
Adding key/value initlength/default
Adding key/value connection/serial
Adding key/value bindir//usr/local/sbin/
Adding key/value use_locking/yes
Adding key/value serial_baudrate/19200
Added new section connect_script
Adding key/value TELEPHONE/12345678
Added new section disconnect_script
Added new section sms
Adding key/value timeout/10
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d             
SM_Block Retry - 0
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d             
The fbus stream is out of sync - expected 0x0c, got  0
SM_Block Retry - 1
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d             
The fbus stream is out of sync - expected 0x0c, got  0
SM_Block Retry - 2
Telephone interface init failed: Command timed out. Quitting.
 
By the way - the same error messages appear no matter if a telephone is 
connected to the serial cable or not, but only if the cable is connected to 
the computer.
I've got some kind of cable where you can switch between F and M - the error 
messages like "the fbus stream is out of sync" only appear when it is 
switched to M, when it is switched to F it says exactly the same as above 
without the line beginning with "The fbus stream ...", but still cannot 
connect.
 
thanking u
 mspattnaik
Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com

 Buy the best in Movies at http://www.videos.indiatimes.com

Bid for for Air Tickets @ Re.1 on Air Sahara Flights. Just log on to 
http://airsahara.indiatimes.com and Bid Now!





reply via email to

[Prev in Thread] Current Thread [Next in Thread]