RE: [Ltib] Installation error - Red Hat 9

[sudhir]

Hi Stuart,

I did
$ rm -rf /tmp/rpm-root
and re ran the ./ltib from non-root user and I could not still get it done. I am also attaching the log file with this email.

In case it is due to the bug in bash, what do you suggest me to do? Is there any easy to fix it? I would appreciate any suggestions.

Thanks!
Sudhir

---

> Subject: RE: [Ltib] Installation error - Red Hat 9
> From: address@hidden
> To: address@hidden
> CC: address@hidden
> Date: Tue, 8 Jan 2008 10:16:14 +0000
>
> Hi Sudhir,
>
> I just tried this on one of our Redhat 9 machines and it installed fine,
> so it looks to me like you may have just triggered a bug in bash (see:
> http://www.mail-archive.com/address@hidden/msg45953.html ). I think if you do:
>
> $ rm -rf /tmp/rpm-root
> ##### change to a non-root account
> $ ./ltib
>
> It may work on a re-run.
>
> Also it looks to me like you may be trying to run LTIB as root. Please
> don't as this will cause you problems (apart from the risk of hosing
> your machine). Please run ltib (even during the install) as a
> non-priviledged user account.
>
> The only time LTIB needs to have root privileges is when actually
> running the install of an rpm (this is handled by sudo for you).
>
> Regards, Stuart
>
>
> On Mon, 2008-01-07 at 13:26 -0600, sudhir wrote:
> > Hi Stuart,
> >
> > I dont get the same error after I installed perl-getop.
> > Still I could not get it installed. The installation stops saying
> > error interrupt. The last part of the log looks as follows:
> >
> >
> > malloc: input.c:379: assertion botched
> > free: underflow detected; mh_nbytes out of range
> > Stopping myself...../libtool: line 5073: 13922 Aborted
> > ( test -z "$pic_flag" || test "$pic_mode" != default )
> >
> > malloc: input.c:379: assertion botched
> > free: underflow detected; mh_nbytes out of range
> > Stopping myself...../libtool: line 5073: 13923 Aborted
> > $run $rm "$output_obj"
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../build -I../lib -I../rpmio
> > -I../beecrypt -I../popt -I/usr/local/include -g -O2 -D_GNU_SOURCE
> > -D_REENTRANT -Wall -Wpointer-arith -Wstrict-prototypes
> > -Wmissing-prototypes -Wno-char-subscripts -c rpmdb.c -o rpmdb.o
> > >/dev/null 2>&1
> > mv -f .libs/rpmdb.lo rpmdb.lo
> >
> > malloc: input.c:379: assertion botched
> > free: underflow detected; mh_nbytes out of range
> > Stopping myself...../libtool: line 5073: 13927 Aborted
> > $run $mv $libobj $lo_libobj
> >
> > malloc: input.c:379: assertion botched
> > free: underflow detected; mh_nbytes out of range
> > Stopping myself...../libtool: line 5073: 13928 Aborted
> > $run $rm $removelist
> > make[2]: *** [rpmdb.lo] Error 134
> > make[2]: Leaving directory `/tmp/rpm-root/BUILD/rpm-4.0.4/rpmdb'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory `/tmp/rpm-root/BUILD/rpm-4.0.4'
> > make: *** [all-recursive-am] Error 2
> > error: Bad exit status from /tmp/rpm-tmp.70666 (%build)
> >
> >
> > RPM build errors:
> > Bad exit status from /tmp/rpm-tmp.70666 (%build)
> > Failed building rpm-fs
> > Died at ./ltib line 2037.
> >
> > Started: Mon Jan 7 11:43:02 2008
> > Ended: Mon Jan 7 11:48:15 2008
> > Elapsed: 313 seconds
> >
> > These packages failed to build:
> > rpm-fs
> > Build Failed
> >
> >
> >
> > Thanks,
> > Sudhir
> >
> >
> >
> >
> >
> >
> >
> > ______________________________________________________________________
> > > Subject: Re: [Ltib] Installation error - Red Hat 9
> > > From: address@hidden
> > > To: address@hidden
> > > CC: address@hidden
> > > Date: Mon, 7 Jan 2008 16:51:30 +0000
> > >
> > > Hi Sudhir,
> > >
> > > This is part of the standard Perl package. If you have this
> > installed
> > > (and have not in some way replaced it) you should be able to see:
> > >
> > > $ ls -l /usr/lib/perl5/5.8.0/Getopt/Long.pm
> > > -r--r--r-- 1 root root 61600 Feb 18
> > 2003 /usr/lib/perl5/5.8.0/Getopt/Long.pm
> > >
> > > $ rpm -qif /usr/lib/perl5/5.8.0/Getopt/Long.pm
> > >
> > > Name : perl Relocations: (not relocateable)
> > > Version : 5.8.0 Vendor: Red Hat, Inc.
> > > Release : 88 Build Date: Tue Feb 18 21:52:16 2003
> > > Install Date: Wed Nov 10 15:44:16 2004 Build Host:
> > stripples.devel.redhat.com
> > > Group : Development/Languages Source RPM: perl-5.8.0-88.src.rpm
> > > Size : 35423442 License: Artistic
> > > Signature : DSA/SHA1, Mon Feb 24 00:44:29 2003, Key ID
> > 219180cddb42a60e
> > > Packager : Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
> > > Summary : The Perl programming language.
> > > ....
> > >
> > > You can check the package using:
> > > $ rpm -V perl
> > >
> > > If it's unmodified, you should get no output.
> > >
> > > Regards, Stuart
> > >
> > >
> > > On Mon, 2008-01-07 at 10:26 -0600, sudhir wrote:
> > > > Hello, while installing ltib in Re Hat 9 I got the following error
> > > > message:
> > > >
> > > >
> > > > Can't locate Getopt/Long.pm in @INC (@INC
> > > >
> > contains: /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 .) at ./ltib line 34.
> > > > BEGIN failed--compilation aborted at ./ltib line 34.
> > > >
> > > > Can anybody help me on it.
> > > >
> > > > Thanks,
> > > > sudhir
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > ______________________________________________________________________
> > > > Get the power of Windows + Web with the new Windows Live. Get it
> > now!
> > > > _______________________________________________
> > > > LTIB home page: http://bitshrine.org
> > > >
> > > > Ltib mailing list
> > > > address@hidden
> > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > >
> >
> >
> > ______________________________________________________________________
> > Watch “Cause Effect,” a show about real people making a real
> > difference. Learn more
>

---

Make distant family not so distant with Windows Vista® + Windows Live™. Start now!

host_config.log
Description: Binary data