[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Ltib] Installation error - Red Hat 9
From: |
Stuart Hughes |
Subject: |
RE: [Ltib] Installation error - Red Hat 9 |
Date: |
Mon, 14 Jan 2008 17:19:39 +0000 |
Hi Sudhir,
Someone contributed "LTIB: Freescale MPC82xx based development boards"
into Savannah CVS, I've not tried this but maybe it's close to what you
need?
Regards, Stuart
On Mon, 2008-01-14 at 10:35 -0600, sudhir wrote:
> Hi Stuart,
>
> I changed to another machine and I passed perl related errors now.
>
> I have MPC8248 and I didnt see this options in the platform selection.
> I was wondering which one of the selection is best for my system.
>
> Thanks,
> Sudhir
>
>
>
>
>
>
> ______________________________________________________________
> Subject: RE: [Ltib] Installation error - Red Hat 9
> From: address@hidden
> To: address@hidden
> CC: address@hidden
> Date: Thu, 10 Jan 2008 18:36:09 +0000
>
> Hi Sudhir,
>
> You need to install a proper set of Perl (and other) software. It's
> now
> telling you that the Class/Struct.pm module is not installed. Maybe
> you
> could ask an admin to help install a set of developer packages for you
> so you have everything.
>
> Regards, Stuart
>
> On Thu, 2008-01-10 at 10:36 -0600, sudhir wrote:
> > Hi Stuart,
> >
> > I installed the Data-Dumper module and it still shows some more
> error.
> > Now I get following error:
> >
> >
> >
> > make[3]: Leaving directory
> > `/opt/freescale/ltib/usr/src/rpm/BUILD/autoconf-2.57/lib'
> > ../../tests/autom4te \
> > --language=m4sugar \
> > --freeze \
> > --output=m4sugar.m4f
> > Can't locate Class/Struct.pm in @INC (@INC
> > contains: /opt/freescale/ltib/usr/src/rpm/BUILD/autoconf-2.57/lib
> /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0
> /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
> /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl
> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
> /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl
> /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 .) at
> /usr/lib/perl5/5.8.0/File/stat.pm line 27.
> > BEGIN failed--compilation aborted at
> /usr/lib/perl5/5.8.0/File/stat.pm
> > line 27.
> >
> > Thanks,
> > Sudhir
> >
> >
> >
> >
> >
> >
> ______________________________________________________________
> > Subject: RE: [Ltib] Installation error - Red Hat 9
> > From: address@hidden
> > To: address@hidden
> > CC: address@hidden
> > Date: Wed, 9 Jan 2008 11:09:24 +0000
> >
> > Hi Sudhir,
> >
> > This is a different problem, you've got past the bash
> problem.
> >
> > In this case it's complaining:
> >
> >
> /opt/freescale/ltib/usr/src/rpm/BUILD/autoconf-2.57/lib'../../tests/autom4te
> \
> > --language=m4sugar \
> > --freeze \
> > --output=m4sugar.m4fCan't locate loadable object
> for module Data::Dumper in @INC (@INC contains:
> /opt/freescale/ltib/usr/src/rpm/BUILD/autoconf-2.57/lib
> /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0
> /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
> /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl
> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
> /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl
> /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 .) at
> /opt/freescale/ltib/usr/src/rpm/BUILD/autoconf-2.57/bin/autom4te line 39
> >
> > This is saying that your Perl installation is missing the
> Data::Dumper
> > module. You need to install this (and I'd advise all the
> common Perl
> > modules) and then 'rm -rf
> opt/freescale/ltib/usr/src/rpm/BUILD/*' and
> > then re-try.
> >
> > Regards, Stuart
> >
> > On Tue, 2008-01-08 at 16:09 -0600, sudhir wrote:
> > >
> > >
> > > Hi Stuart,
> > >
> > > I did
> > > $ rm -rf /tmp/rpm-root
> > > and re ran the ./ltib from non-root user and I could not
> still get it
> > > done. I am also attaching the log file with this email.
> > >
> > > In case it is due to the bug in bash, what do you suggest
> me to do? Is
> > > there any easy to fix it? I would appreciate any
> suggestions.
> > >
> > > Thanks!
> > > Sudhir
> > >
> > >
> > >
> > >
> > >
> ______________________________________________________________________
> > > > Subject: RE: [Ltib] Installation error - Red Hat 9
> > > > From: address@hidden
> > > > To: address@hidden
> > > > CC: address@hidden
> > > > Date: Tue, 8 Jan 2008 10:16:14 +0000
> > > >
> > > > Hi Sudhir,
> > > >
> > > > I just tried this on one of our Redhat 9 machines and
> it installed
> > > fine,
> > > > so it looks to me like you may have just triggered a
> bug in bash
> > > (see:
> > > >
> > > http://www.mail-archive.com/address@hidden/msg45953.html
> ). I think if you do:
> > > >
> > > > $ rm -rf /tmp/rpm-root
> > > > ##### change to a non-root account
> > > > $ ./ltib
> > > >
> > > > It may work on a re-run.
> > > >
> > > > Also it looks to me like you may be trying to run LTIB
> as root.
> > > Please
> > > > don't as this will cause you problems (apart from the
> risk of hosing
> > > > your machine). Please run ltib (even during the
> install) as a
> > > > non-priviledged user account.
> > > >
> > > > The only time LTIB needs to have root privileges is
> when actually
> > > > running the install of an rpm (this is handled by sudo
> for you).
> > > >
> > > > Regards, Stuart
> > > >
> > > >
> > > > On Mon, 2008-01-07 at 13:26 -0600, sudhir wrote:
> > > > > Hi Stuart,
> > > > >
> > > > > I dont get the same error after I installed
> perl-getop.
> > > > > Still I could not get it installed. The installation
> stops saying
> > > > > error interrupt. The last part of the log looks as
> follows:
> > > > >
> > > > >
> > > > > malloc: input.c:379: assertion botched
> > > > > free: underflow detected; mh_nbytes out of range
> > > > > Stopping myself...../libtool: line 5073: 13922 Aborted
> > > > > ( test -z "$pic_flag" || test "$pic_mode" != default )
> > > > >
> > > > > malloc: input.c:379: assertion botched
> > > > > free: underflow detected; mh_nbytes out of range
> > > > > Stopping myself...../libtool: line 5073: 13923 Aborted
> > > > > $run $rm "$output_obj"
> > > > > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../build
> -I../lib
> > > -I../rpmio
> > > > > -I../beecrypt -I../popt -I/usr/local/include -g -O2
> -D_GNU_SOURCE
> > > > > -D_REENTRANT -Wall -Wpointer-arith -Wstrict-prototypes
> > > > > -Wmissing-prototypes -Wno-char-subscripts -c rpmdb.c
> -o rpmdb.o
> > > > > >/dev/null 2>&1
> > > > > mv -f .libs/rpmdb.lo rpmdb.lo
> > > > >
> > > > > malloc: input.c:379: assertion botched
> > > > > free: underflow detected; mh_nbytes out of range
> > > > > Stopping myself...../libtool: line 5073: 13927 Aborted
> > > > > $run $mv $libobj $lo_libobj
> > > > >
> > > > > malloc: input.c:379: assertion botched
> > > > > free: underflow detected; mh_nbytes out of range
> > > > > Stopping myself...../libtool: line 5073: 13928 Aborted
> > > > > $run $rm $removelist
> > > > > make[2]: *** [rpmdb.lo] Error 134
> > > > > make[2]: Leaving directory
> `/tmp/rpm-root/BUILD/rpm-4.0.4/rpmdb'
> > > > > make[1]: *** [all-recursive] Error 1
> > > > > make[1]: Leaving directory
> `/tmp/rpm-root/BUILD/rpm-4.0.4'
> > > > > make: *** [all-recursive-am] Error 2
> > > > > error: Bad exit status from /tmp/rpm-tmp.70666
> (%build)
> > > > >
> > > > >
> > > > > RPM build errors:
> > > > > Bad exit status from /tmp/rpm-tmp.70666 (%build)
> > > > > Failed building rpm-fs
> > > > > Died at ./ltib line 2037.
> > > > >
> > > > > Started: Mon Jan 7 11:43:02 2008
> > > > > Ended: Mon Jan 7 11:48:15 2008
> > > > > Elapsed: 313 seconds
> > > > >
> > > > > These packages failed to build:
> > > > > rpm-fs
> > > > > Build Failed
> > > > >
> > > > >
> > > > >
> > > > > Thanks,
> > > > > Sudhir
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > >
> ______________________________________________________________________
> > > > > > Subject: Re: [Ltib] Installation error - Red Hat 9
> > > > > > From: address@hidden
> > > > > > To: address@hidden
> > > > > > CC: address@hidden
> > > > > > Date: Mon, 7 Jan 2008 16:51:30 +0000
> > > > > >
> > > > > > Hi Sudhir,
> > > > > >
> > > > > > This is part of the standard Perl package. If you
> have this
> > > > > installed
> > > > > > (and have not in some way replaced it) you should
> be able to
> > > see:
> > > > > >
> > > > > > $ ls -l /usr/lib/perl5/5.8.0/Getopt/Long.pm
> > > > > > -r--r--r-- 1 root root 61600 Feb 18
> > > > > 2003 /usr/lib/perl5/5.8.0/Getopt/Long.pm
> > > > > >
> > > > > > $ rpm -qif /usr/lib/perl5/5.8.0/Getopt/Long.pm
> > > > > >
> > > > > > Name : perl Relocations: (not relocateable)
> > > > > > Version : 5.8.0 Vendor: Red Hat, Inc.
> > > > > > Release : 88 Build Date: Tue Feb 18 21:52:16 2003
> > > > > > Install Date: Wed Nov 10 15:44:16 2004 Build Host:
> > > > > stripples.devel.redhat.com
> > > > > > Group : Development/Languages Source RPM:
> perl-5.8.0-88.src.rpm
> > > > > > Size : 35423442 License: Artistic
> > > > > > Signature : DSA/SHA1, Mon Feb 24 00:44:29 2003, Key
> ID
> > > > > 219180cddb42a60e
> > > > > > Packager : Red Hat, Inc.
> <http://bugzilla.redhat.com/bugzilla>
> > > > > > Summary : The Perl programming language.
> > > > > > ....
> > > > > >
> > > > > > You can check the package using:
> > > > > > $ rpm -V perl
> > > > > >
> > > > > > If it's unmodified, you should get no output.
> > > > > >
> > > > > > Regards, Stuart
> > > > > >
> > > > > >
> > > > > > On Mon, 2008-01-07 at 10:26 -0600, sudhir wrote:
> > > > > > > Hello, while installing ltib in Re Hat 9 I got
> the following
> > > error
> > > > > > > message:
> > > > > > >
> > > > > > >
> > > > > > > Can't locate Getopt/Long.pm in @INC (@INC
> > > > > > >
> > > > >
> > > contains: /usr/lib/perl5/5.8.0/i386-linux-thread-multi
> /usr/lib/perl5/5.8.0 /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
> /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl
> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
> /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl
> /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 .) at
> ./ltib line 34.
> > > > > > > BEGIN failed--compilation aborted at ./ltib line
> 34.
> > > > > > >
> > > > > > > Can anybody help me on it.
> > > > > > >
> > > > > > > Thanks,
> > > > > > > sudhir
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
- [Ltib] Installation error - Red Hat 9, sudhir, 2008/01/07
- Re: [Ltib] Installation error - Red Hat 9, Stuart Hughes, 2008/01/07
- RE: [Ltib] Installation error - Red Hat 9, sudhir, 2008/01/07
- RE: [Ltib] Installation error - Red Hat 9, Stuart Hughes, 2008/01/08
- RE: [Ltib] Installation error - Red Hat 9, sudhir, 2008/01/08
- RE: [Ltib] Installation error - Red Hat 9, Stuart Hughes, 2008/01/09
- RE: [Ltib] Installation error - Red Hat 9, sudhir, 2008/01/10
- RE: [Ltib] Installation error - Red Hat 9, Stuart Hughes, 2008/01/10
- RE: [Ltib] Installation error - Red Hat 9, sudhir, 2008/01/14
- RE: [Ltib] Installation error - Red Hat 9,
Stuart Hughes <=
- RE: [Ltib] Installation error - Red Hat 9, Stuart Hughes, 2008/01/15