|
Hi Stuart,
I installed the Data-Dumper module and it still shows some more error. Now I get following error:
make[3]: Leaving directory `/opt/freescale/ltib/usr/src/rpm/BUILD/autoconf-2.57/lib'
../../tests/autom4te \
--language=m4sugar \
--freeze \
--output=m4sugar.m4f
Can't locate Class/Struct.pm in @INC (@INC contains: /opt/freescale/ltib/usr/src/rpm/BUILD/autoconf-2.57/lib /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 .) at /usr/lib/perl5/5.8.0/File/stat.pm line 27.
BEGIN failed--compilation aborted at /usr/lib/perl5/5.8.0/File/stat.pm line 27.
Thanks,
Sudhir
Subject: RE: [Ltib] Installation error - Red Hat 9
From: address@hidden
To: address@hidden
CC: address@hidden
Date: Wed, 9 Jan 2008 11:09:24 +0000
Hi Sudhir,
This is a different problem, you've got past the bash problem.
In this case it's complaining:
/opt/freescale/ltib/usr/src/rpm/BUILD/autoconf-2.57/lib'../../tests/autom4te \
--language=m4sugar \
--freeze \
--output=m4sugar.m4fCan't locate loadable object for module Data::Dumper in @INC (@INC contains: /opt/freescale/ltib/usr/src/rpm/BUILD/autoconf-2.57/lib /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 .) at /opt/freescale/ltib/usr/src/rpm/BUILD/autoconf-2.57/bin/autom4te line 39
This is saying that your Perl installation is missing the Data::Dumper
module. You need to install this (and I'd advise all the common Perl
modules) and then 'rm -rf opt/freescale/ltib/usr/src/rpm/BUILD/*' and
then re-try.
Regards, Stuart
On Tue, 2008-01-08 at 16:09 -0600, sudhir wrote:
>
>
> Hi Stuart,
>
> I did
> $ rm -rf /tmp/rpm-root
> and re ran the ./ltib from non-root user and I could not still get it
> done. I am also attaching the log file with this email.
>
> In case it is due to the bug in bash, what do you suggest me to do? Is
> there any easy to fix it? I would appreciate any suggestions.
>
> Thanks!
> Sudhir
>
>
>
>
> ______________________________________________________________________
> > Subject: RE: [Ltib] Installation error - Red Hat 9
> > From: address@hidden
> > To: address@hidden
> > CC: address@hidden
> > Date: Tue, 8 Jan 2008 10:16:14 +0000
> >
> > Hi Sudhir,
> >
> > I just tried this on one of our Redhat 9 machines and it installed
> fine,
> > so it looks to me like you may have just triggered a bug in bash
> (see:
> >
> http://www.mail-archive.com/address@hidden/msg45953.html ). I think if you do:
> >
> > $ rm -rf /tmp/rpm-root
> > ##### change to a non-root account
> > $ ./ltib
> >
> > It may work on a re-run.
> >
> > Also it looks to me like you may be trying to run LTIB as root.
> Please
> > don't as this will cause you problems (apart from the risk of hosing
> > your machine). Please run ltib (even during the install) as a
> > non-priviledged user account.
> >
> > The only time LTIB needs to have root privileges is when actually
> > running the install of an rpm (this is handled by sudo for you).
> >
> > Regards, Stuart
> >
> >
> > On Mon, 2008-01-07 at 13:26 -0600, sudhir wrote:
> > > Hi Stuart,
> > >
> > > I dont get the same error after I installed perl-getop.
> > > Still I could not get it installed. The installation stops saying
> > > error interrupt. The last part of the log looks as follows:
> > >
> > >
> > > malloc: input.c:379: assertion botched
> > > free: underflow detected; mh_nbytes out of range
> > > Stopping myself...../libtool: line 5073: 13922 Aborted
> > > ( test -z "$pic_flag" || test "$pic_mode" != default )
> > >
> > > malloc: input.c:379: assertion botched
> > > free: underflow detected; mh_nbytes out of range
> > > Stopping myself...../libtool: line 5073: 13923 Aborted
> > > $run $rm "$output_obj"
> > > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../build -I../lib
> -I../rpmio
> > > -I../beecrypt -I../popt -I/usr/local/include -g -O2 -D_GNU_SOURCE
> > > -D_REENTRANT -Wall -Wpointer-arith -Wstrict-prototypes
> > > -Wmissing-prototypes -Wno-char-subscripts -c rpmdb.c -o rpmdb.o
> > > >/dev/null 2>&1
> > > mv -f .libs/rpmdb.lo rpmdb.lo
> > >
> > > malloc: input.c:379: assertion botched
> > > free: underflow detected; mh_nbytes out of range
> > > Stopping myself...../libtool: line 5073: 13927 Aborted
> > > $run $mv $libobj $lo_libobj
> > >
> > > malloc: input.c:379: assertion botched
> > > free: underflow detected; mh_nbytes out of range
> > > Stopping myself...../libtool: line 5073: 13928 Aborted
> > > $run $rm $removelist
> > > make[2]: *** [rpmdb.lo] Error 134
> > > make[2]: Leaving directory `/tmp/rpm-root/BUILD/rpm-4.0.4/rpmdb'
> > > make[1]: *** [all-recursive] Error 1
> > > make[1]: Leaving directory `/tmp/rpm-root/BUILD/rpm-4.0.4'
> > > make: *** [all-recursive-am] Error 2
> > > error: Bad exit status from /tmp/rpm-tmp.70666 (%build)
> > >
> > >
> > > RPM build errors:
> > > Bad exit status from /tmp/rpm-tmp.70666 (%build)
> > > Failed building rpm-fs
> > > Died at ./ltib line 2037.
> > >
> > > Started: Mon Jan 7 11:43:02 2008
> > > Ended: Mon Jan 7 11:48:15 2008
> > > Elapsed: 313 seconds
> > >
> > > These packages failed to build:
> > > rpm-fs
> > > Build Failed
> > >
> > >
> > >
> > > Thanks,
> > > Sudhir
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> ______________________________________________________________________
> > > > Subject: Re: [Ltib] Installation error - Red Hat 9
> > > > From: address@hidden
> > > > To: address@hidden
> > > > CC: address@hidden
> > > > Date: Mon, 7 Jan 2008 16:51:30 +0000
> > > >
> > > > Hi Sudhir,
> > > >
> > > > This is part of the standard Perl package. If you have this
> > > installed
> > > > (and have not in some way replaced it) you should be able to
> see:
> > > >
> > > > $ ls -l /usr/lib/perl5/5.8.0/Getopt/Long.pm
> > > > -r--r--r-- 1 root root 61600 Feb 18
> > > 2003 /usr/lib/perl5/5.8.0/Getopt/Long.pm
> > > >
> > > > $ rpm -qif /usr/lib/perl5/5.8.0/Getopt/Long.pm
> > > >
> > > > Name : perl Relocations: (not relocateable)
> > > > Version : 5.8.0 Vendor: Red Hat, Inc.
> > > > Release : 88 Build Date: Tue Feb 18 21:52:16 2003
> > > > Install Date: Wed Nov 10 15:44:16 2004 Build Host:
> > > stripples.devel.redhat.com
> > > > Group : Development/Languages Source RPM: perl-5.8.0-88.src.rpm
> > > > Size : 35423442 License: Artistic
> > > > Signature : DSA/SHA1, Mon Feb 24 00:44:29 2003, Key ID
> > > 219180cddb42a60e
> > > > Packager : Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
> > > > Summary : The Perl programming language.
> > > > ....
> > > >
> > > > You can check the package using:
> > > > $ rpm -V perl
> > > >
> > > > If it's unmodified, you should get no output.
> > > >
> > > > Regards, Stuart
> > > >
> > > >
> > > > On Mon, 2008-01-07 at 10:26 -0600, sudhir wrote:
> > > > > Hello, while installing ltib in Re Hat 9 I got the following
> error
> > > > > message:
> > > > >
> > > > >
> > > > > Can't locate Getopt/Long.pm in @INC (@INC
> > > > >
> > >
> contains: /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 .) at ./ltib line 34.
> > > > > BEGIN failed--compilation aborted at ./ltib line 34.
> > > > >
> > > > > Can anybody help me on it.
> > > > >
> > > > > Thanks,
> > > > > sudhir
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > >
> ______________________________________________________________________
> > > > > Get the power of Windows + Web with the new Windows Live. Get
> it
> > > now!
> > > > > _______________________________________________
> > > > > LTIB home page: http://bitshrine.org
> > > > >
> > > > > Ltib mailing list
> > > > > address@hidden
> > > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > >
> > >
> > >
> > >
> ______________________________________________________________________
> > > Watch Cause Effect, a show about real people making a real
> > > difference. Learn more
> >
>
>
> ______________________________________________________________________
> Make distant family not so distant with Windows Vista® + Windows
> Live. Start now!
Make distant family not so distant with Windows Vista® + Windows Live. Start now!
|