[Ltib] Re: Reg-PDK-IMX31 installation with linux-wlan

[Stuart Hughes]

Hi Sivakumar.R.J,

You'll need to contact Freescale for support with this. Please follow
these steps:

   * go to http://www.freescale.com
   * click on "Support / Technical support"
   * click on "Submit a Service Request"
   * register to get a user name and password.
   * login in with your user name and password
   * on the "New Service Request" page:
      * category = Technical Request
      * topic = Linux BSP
      * Click on "Continue"
   * fill out the information for the service request
   * click on the "Submit" button at the bottom of the page.

Regards, Stuart

On Thu, 2008-07-24 at 15:24 +0530, sivakumar wrote:
> Dear support,
>       When i try to install the latest IMX31 BSP of PDK version on 
> selecting the linux-wlan support, i got the following error, please 
> suggest me to solve this
> 
> *Processing: linux-wlan
> ========================
> rpmbuild --dbpath /home/skumar/pdk/ltib/rpmdb --define 
> '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' 
> --define '__strip strip' --define '_topdir /home/skumar/pdk/ltib/rpm' 
> --define '_prefix /usr' --define '_tmppath /home/skumar/pdk/ltib/tmp' 
> --define '_mandir /usr/share/man' --define '_sysconfdir /etc' --define 
> '_localstatedir /var' -bc --short-circuit  
> /home/skumar/pdk/ltib/dist/lfs-5.1/linux-wlan/linux-wlan.spec
> Executing(%build): /bin/sh -e /home/skumar/pdk/ltib/tmp/rpm-tmp.1483
> + umask 022
> + cd /home/skumar/pdk/ltib/rpm/BUILD
> + cd linux-wlan-ng-0.1.12
> + KERNEL_SRC_DIR=/home/skumar/pdk/ltib/rpm/BUILD/linux
> + PCMCIA_SRC_DIR=/home/skumar/pdk/ltib/rpm/BUILD/pcmcia-cs-3.2.4
> + '[' '!' -d /home/skumar/pdk/ltib/rpm/BUILD/linux -o '!' -d 
> /home/skumar/pdk/ltib/rpm/BUILD/pcmcia-cs-3.2.4 ']'
> + echo 'This package requires kernel and pcmcis-cs source.'
> This package requires kernel and pcmcis-cs source.
> + echo 'For the kernel, run '\''./ltib -m config'\'' and enable the option'
> For the kernel, run './ltib -m config' and enable the option
> + echo ''\''Leave the sources after building'\'' and for pcmcia-cs,'
> 'Leave the sources after building' and for pcmcia-cs,
> + echo 'build the package and leave the source with:'
> build the package and leave the source with:
> + echo ''\''./ltib -p pcmcia-cs -l'\''.'
> './ltib -p pcmcia-cs -l'.
> + exit 1
> error: Bad exit status from /home/skumar/pdk/ltib/tmp/rpm-tmp.1483 (%build)
> 
> 
> RPM build errors:
>    Bad exit status from /home/skumar/pdk/ltib/tmp/rpm-tmp.1483 (%build)
> Build time for linux-wlan: 0 seconds
> 
> Failed building linux-wlan
> 
> 
> f_buildrpms() returned an error, exiting
> 
> Started: Thu Jul 24 15:11:01 2008
> Ended:   Thu Jul 24 15:13:10 2008
> Elapsed: 129 seconds
> 
> These packages failed to build:
> linux-wlan
> Build Failed
> 
> 
> Best regards,
> Sivakumar.R.J