Re: RE : [Ltib] ltib v7.2.1 - imx27ads - alsa-utils-1.0.11rc2 - package isnot generated

[Stuart Hughes]

Hi Selso,

Rather than running ./ltib -p alsa-utils you should run:
$ ./ltib -m config 
and select packages from there and then run:
$ ./ltib

Enabling alsa-utils will select alsa_lib and ncurses for you.  Running
in single package mode is only meant to be used if you're specifically
working on a package.

Regards, Stuart

On Thu, 2008-09-04 at 18:59 +0200, Selso LIBERADO wrote:
> I have tried on a other computer, and it works ! But my spec file, dir
> tree, and tarballs are the same.
> I think that the prep step script' is not generating a good tmp script
> (it exits before extracting archive)
> Can it com from a corruption of the rpmdb  ? How can I check it ?
> 
> 
> -------- Message d'origine--------
> De: Estevam Fabio-R49496 [mailto:address@hidden
> Date: jeu. 04/09/2008 15:08
> À: Selso LIBERADO; address@hidden
> Objet : RE: [Ltib] ltib v7.2.1 - imx27ads - alsa-utils-1.0.11rc2 -
> package isnot generated
> 
> Can you try this on the original MX27ADS 20071219 BSP and compare with
> your BSP?
> 
> Regards,
> 
> Fabio Estevam
> 
> ________________________________
> 
> From: Selso LIBERADO [mailto:address@hidden
> Sent: Thursday, September 04, 2008 10:04 AM
> To: Estevam Fabio-R49496; address@hidden
> Subject: RE : [Ltib] ltib v7.2.1 - imx27ads - alsa-utils-1.0.11rc2 -
> package isnot generated
> 
> 
> 
> I have done this but there is nothing in the rpm/BUILD directory ...
> 
> ./ltib -p alsa-utils-1.0.11rc2.spec -m prep
> 
> Processing platform: Freescale IMX27 PDK reference board
> ==========================================================
> using config/platform/imx27pdk/.config
> 
> Processing: alsa-utils-1.0.11rc2
> ==================================
> rpmbuild --dbpath /../ltib/rpmdb --define
> '_unpackaged_files_terminate_build 0' --define '_target_cpu arm'
> --define '__strip strip' --define '_topdir /../ltib/rpm' --define
> '_prefix /usr' --define '_tmppath /../ltib/tmp' --define '_mandir
> /usr/share/man' --define '_sysconfdir /etc' --define '_localstatedir
> /var' -bp  /../ltib/rpm/SPECS/alsa-utils-1.0.11rc2.spec
> Executing(%prep): /bin/sh -e /../tmp/rpm-tmp.82192
> + umask 022
> + cd /../ltib/rpm/BUILD
> + exit 0
> Build time for alsa-utils-1.0.11rc2: 0 seconds
> 
> address@hidden ls rpm/BUILD/
> dev-1.1  misc  qtopia-opensource-4.3.0
> 
> 
> 
> 
> _______________________________________________
> LTIB home page: http://bitshrine.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib