Re: [Ltib] Problems with Requires of libglade.

[Stuart Hughes]

Hi Rogerio,

This normally happens if there is some utility or script included in the 
package payload that has #!/usr/bin/python in it at the start.  Often 
you can just drop the offending script from the package (as they're 
normally not that important).  However it depends what it is.

To find the offending file, unpack the rpm or otherwise have the package 
payload blownout (could use -m scinstall).  Then run (all one line):

for i in `find path_to_package_files/ -type f` ; do echo $i ; echo $i | 
/opt/ltib/usr/lib/rpm/find-requires ; done

This should list the files and the dependencies they pull in, from there 
 you should be able to determine the file and then if not essential, 
remove from the payload (put an rm -f ..../file_name into the %Install 
section after the 'make install').

Regards, Stuart

Rogério de Souza Moraes wrote:
> Hi folks,
>
> When I try to compile the package libglade in ltib I face the following 
> problem:
>
> sudo /opt/ltib/usr/bin/rpm --root /work/ltib/ltib_2009-10-14_git/rootfs 
> --dbpath /var/lib/rpm -e --allmatches --nodeps --noscripts --define 
> '_tmppath /tmp/ltib' libglade 2>/dev/null
> sudo /opt/ltib/usr/bin/rpm --root /work/ltib/ltib_2009-10-14_git/rootfs 
> --dbpath /var/lib/rpm --prefix / --ignorearch -ivh --force --excludedocs 
> --noscripts --define '_tmppath /tmp/ltib' 
> /work/ltib/ltib_2009-10-14_git/rpm/RPMS/arm/libglade-2.6.4-1.arm.rpm
> error: failed dependencies:
>     /usr/bin/python   is needed by libglade-2.6.4-1
>
>
> Appears that somehow the "/usr/bin/python" is included in RPM. I 
> executed to command bellow to confirm this.
>
>
> rpm -qpR 
> /work/ltib/ltib_2009-10-14_git/rpm/RPMS/arm/libglade-2.6.4-1.arm.rpm
> rpmlib(PayloadFilesHavePrefix) <= 4.0-1
> rpmlib(CompressedFileNames) <= 3.0.4-1
> /usr/bin/python 
> libc.so.6(GLIBC_2.4)
>
>
> I checked inside the spec and the requires is empty.
>
> If I build this package following the steps:
>
> ./ltib -p libglade -m prep
> ./ltib -p libglade -m scbuild
> ./ltib -p libglade -m scdeploy
>
> The package doesn't get the (/usr/bin/python) require. Someone already 
> faced it?
>
> Regards, Rogerio
>
>           
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib