ltib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Ltib] Problems with Requires of libglade.


From: Rogério de Souza Moraes
Subject: Re: [Ltib] Problems with Requires of libglade.
Date: Fri, 16 Oct 2009 08:36:13 -0300

Hi Stuart,

we are trying to install woosh web-browser in ltib and it requires webkit that requires libglade >= 2.6.4. We are keeping and testing a version of ltib here with your requirements, so if you think that it will not be a big deal to update libglade I can send you the patch else there is no problem for us here.

Regards, Rogerio

2009/10/15 Stuart Hughes <address@hidden>
Hi Rogerio,

Why was the reason for the upgrade to 2.6.4.  My concern is that upgrading package X usually indirectly causes others to need updates, so I'm cautious.

A patch would be nice.


Regards, Stuart

Rogério de Souza Moraes wrote:
Hi Stuart,

here we had to update the libglade to version 2.6.4. In this version, the libglade have do a gtktest that calls the "/usr/bin/python". To solve this I just need to put --disable-gtktest in configure parameter. If I think there is no problem to update libglake in ltib, I can send you the patch and the source to do that.

Thanks for helping me again!

Regards, Rogerio

2009/10/15 Stuart Hughes <address@hidden <mailto:address@hidden>>


   Hi Rogerio,

   This normally happens if there is some utility or script included in
   the package payload that has #!/usr/bin/python in it at the start.
    Often you can just drop the offending script from the package (as
   they're normally not that important).  However it depends what it is.

   To find the offending file, unpack the rpm or otherwise have the
   package payload blownout (could use -m scinstall).  Then run (all
   one line):

   for i in `find path_to_package_files/ -type f` ; do echo $i ; echo
   $i | /opt/ltib/usr/lib/rpm/find-requires ; done

   This should list the files and the dependencies they pull in, from
   there  you should be able to determine the file and then if not
   essential, remove from the payload (put an rm -f ..../file_name into
   the %Install section after the 'make install').

   Regards, Stuart


   Rogério de Souza Moraes wrote:

       Hi folks,

       When I try to compile the package libglade in ltib I face the
       following problem:

       sudo /opt/ltib/usr/bin/rpm --root
       /work/ltib/ltib_2009-10-14_git/rootfs --dbpath /var/lib/rpm -e
       --allmatches --nodeps --noscripts --define '_tmppath /tmp/ltib'
       libglade 2>/dev/null
       sudo /opt/ltib/usr/bin/rpm --root
       /work/ltib/ltib_2009-10-14_git/rootfs --dbpath /var/lib/rpm
       --prefix / --ignorearch -ivh --force --excludedocs --noscripts
       --define '_tmppath /tmp/ltib'
       /work/ltib/ltib_2009-10-14_git/rpm/RPMS/arm/libglade-2.6.4-1.arm.rpm
       error: failed dependencies:
          /usr/bin/python   is needed by libglade-2.6.4-1


       Appears that somehow the "/usr/bin/python" is included in RPM. I
       executed to command bellow to confirm this.


       rpm -qpR
       /work/ltib/ltib_2009-10-14_git/rpm/RPMS/arm/libglade-2.6.4-1.arm.rpm
       rpmlib(PayloadFilesHavePrefix) <= 4.0-1
       rpmlib(CompressedFileNames) <= 3.0.4-1
       /usr/bin/python libc.so.6(GLIBC_2.4)


       I checked inside the spec and the requires is empty.

       If I build this package following the steps:

       ./ltib -p libglade -m prep
       ./ltib -p libglade -m scbuild
       ./ltib -p libglade -m scdeploy

       The package doesn't get the (/usr/bin/python) require. Someone
       already faced it?

       Regards, Rogerio

               


       ------------------------------------------------------------------------

       _______________________________________________
       LTIB home page: http://ltib.org

       Ltib mailing list
       address@hidden <mailto:address@hidden>


reply via email to

[Prev in Thread] Current Thread [Next in Thread]