Re: [Ltib] Problems with Requires of libglade.

[Rogério de Souza Moraes]

Hi Stuart,

here we had to update the libglade to version 2.6.4.
In this version, the libglade have do a gtktest that calls the
"/usr/bin/python". To solve this I just need to put --disable-gtktest
in configure parameter. If I think there is no problem to update
libglake in ltib, I can send you the patch and the source to do that.

Thanks for helping me again!

Regards, Rogerio

2009/10/15 Stuart Hughes <address@hidden>

Hi Rogerio,

This normally happens if there is some utility or script included in the package payload that has #!/usr/bin/python in it at the start.  Often you can just drop the offending script from the package (as they're normally not that important).  However it depends what it is.

To find the offending file, unpack the rpm or otherwise have the package payload blownout (could use -m scinstall).  Then run (all one line):

for i in `find path_to_package_files/ -type f` ; do echo $i ; echo $i | /opt/ltib/usr/lib/rpm/find-requires ; done

This should list the files and the dependencies they pull in, from there  you should be able to determine the file and then if not essential, remove from the payload (put an rm -f ..../file_name into the %Install section after the 'make install').

Regards, Stuart

Rogério de Souza Moraes wrote:

Hi folks,

When I try to compile the package libglade in ltib I face the following problem:

sudo /opt/ltib/usr/bin/rpm --root /work/ltib/ltib_2009-10-14_git/rootfs --dbpath /var/lib/rpm -e --allmatches --nodeps --noscripts --define '_tmppath /tmp/ltib' libglade 2>/dev/null
sudo /opt/ltib/usr/bin/rpm --root /work/ltib/ltib_2009-10-14_git/rootfs --dbpath /var/lib/rpm --prefix / --ignorearch -ivh --force --excludedocs --noscripts --define '_tmppath /tmp/ltib' /work/ltib/ltib_2009-10-14_git/rpm/RPMS/arm/libglade-2.6.4-1.arm.rpm
error: failed dependencies:
   /usr/bin/python   is needed by libglade-2.6.4-1


Appears that somehow the "/usr/bin/python" is included in RPM. I executed to command bellow to confirm this.


rpm -qpR /work/ltib/ltib_2009-10-14_git/rpm/RPMS/arm/libglade-2.6.4-1.arm.rpm
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rpmlib(CompressedFileNames) <= 3.0.4-1
/usr/bin/python libc.so.6(GLIBC_2.4)


I checked inside the spec and the requires is empty.

If I build this package following the steps:

./ltib -p libglade -m prep
./ltib -p libglade -m scbuild
./ltib -p libglade -m scdeploy

The package doesn't get the (/usr/bin/python) require. Someone already faced it?

Regards, Rogerio

         

------------------------------------------------------------------------

_______________________________________________
LTIB home page: http://ltib.org

Ltib mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/ltib