Re: [Ltib] ltib not installing the cross compiler.

[seh]

Hi Glenn,

See my earlier reply.  Can you inspect the reported line error and then
match that to the ltib script and copy and paste the area of the failure. 
That will help diagnose the problem.

Unfortunately as this copy of LTIB has not been merged to the public
project, I don't know what's in it and so can't correlate the line
numbering myself.

Regards, Stuart


> On Sun, Oct 3, 2010 at 6:24 PM, Glenn R Heard Jr <address@hidden>
> wrote:
>> On Sat, Oct 2, 2010 at 7:02 AM, Stuart Hughes <address@hidden> wrote:
>>>
>>> If this looks okay, what is supposed to tie-up is the entry in the
>>> defconfig for that platform and these paths (or the .config once you're
>>> run it).
>>>
>>> To find out you BSP run:
>>>
>>> $ cat .config | grep CONFIG_PLATFORM_DIR
>>>
>>
>>  Where exactly do you find the .config in the ltib directory structure?
>>
>
> Stupid me again. I found the .config... where it should be... in the ltib
> root.
>
> Here is my bsp .config
>
> CONFIG_TOOLCHAIN_ARMEABI_CODE_SOURCERY=y
> CONFIG_TOOLCHAIN="gcc-4.3.3-glibc-2.8-cs2009q1-203-1.i386.rpm"
> CONFIG_TOOLCHAIN_PATH="/opt/freescale/usr/local/gcc-4.3.3-glibc-2.8-cs2009q1-203/arm-none-linux-gnueabi"
> CONFIG_TOOLCHAIN_PREFIX="arm-none-linux-gnueabi-"
> CONFIG_TOOLCHAIN_CFLAGS="-O2 -fsigned-char -msoft-float"
>
> Here again is the part of ltib that isn't working:
>
>>>>
>>>> Installing: gcc-4.3.3-glibc-2.8-cs2009q1-203-1.i386.rpm
>>>> sudo /opt/freescale/ltib/usr/bin/rpm --dbpath
>>>> /opt/freescale/ltib/var/lib/rpm -ivh --force --ignorearch
>>>> /opt/freescale/pkgs/gcc-4.3.3-glibc-2.8-cs2009q1-203-1.i386.rpm
>>>> Preparing...              
>>>>  ########################################### [100%]
>>>>  
>>>>  1:gcc-4.3.3-glibc-2.8-cs2###########################################
>>>> [100%]
>>>> sh:
>>>> /opt/freescale/usr/local/gcc-4.3.3-glibc-2.8-cs2009q1-203/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc:
>>>> not found
>>
>
> If I manually copy & paste the patth in the "sh: /opt/..." line above,
> the compiler is there. Why then doesn't it work within ltib?
>
> If you can't tell, I'm completely out of my depth here, but I am
> trying to learn.
>
> --
> Glenn R Heard Jr
> grheard (at) gmail (.) com
> draeh (at) tacticalgamer (.) com
>