Ri.: Re: [Ltib] Build error fotr packages related to X11

[Enrico Miglino]

Hi again ... :)

I checked just now with my last try. For example, package libxt is marked with 
"---" in the X11 section, libraries. And the build stops with the message that 
the package "libxt" can't be compiled...

Now I check for a different download version, then  I have no ideas. 

Enrico




> ----- Messaggio originale ----- 
> Da: "Stuart Hughes‎" <address@hidden>
> A: "Enrico Miglino‎" <address@hidden>
> cc: address@hidden
> Oggetto: Re: [Ltib] Build error fotr packages related to X11
> Data: Tue, 14 Dec 2010 19:51:11 +0000
> 
> 
>Hi Enrico,
> 
> Run ./ltib  --config and navigate to:
> 
> Package list  --->  X11  --->
> 
> Make sure "Install X11" is set.  I've attached a screen dump to show this.
> 
> Regards, Stuart
> 
> 
> Enrico Miglino wrote:
> > Hi to all
> >
> > I create another fresh ltib install, and started again! After 
> > platform setting (EA3250) I set a minimal configuration for linux 
> > and proceeded to build.
> >
> > After all the process, up to an hour, ltib build stops  with the 
> > fololowing message:
> >
> > I left a lot of defaults and changed only the indispensable, but 
> > the error remain. Now I try to build with --continue, but it seems 
> > a nonsense... The idea I have is that something is omitted, or is 
> > wrong. I already changed permissions in ubuntu 10.04 for /opt 
> > directory, I'm ignoring the error about .gvfs directory 
> > permissions, but I can't compile.
> >
> > Thanks, Enrico
> >
> > ==========================
> > checking for X... configure: error: Package requirements (x11) were not met:
> >
> > No package 'x11' found
> >
> > Consider adjusting the PKG_CONFIG_PATH environment variable if you
> > installed software in a non-standard prefix.
> >
> > Alternatively, you may set the environment variables X_CFLAGS
> > and X_LIBS to avoid the need to call pkg-config.
> > See the pkg-config man page for more details.
> >
> > error: Bad exit status from 
> > /home/enrico/ltib/EA3250/tmp/rpm-tmp.74359 (%build)
> >
> >
> > RPM build errors:
> >     Bad exit status from /home/enrico/ltib/EA3250/tmp/rpm-tmp.74359 (%build)
> > Build time for libXrender: 16 seconds
> >
> > Failed building libXrender
> >
> >
> > f_buildrpms() returned an error, exiting
> > traceback:
> >  main:561
> >
> >
> > Started: Tue Dec 14 18:03:17 2010
> > Ended:   Tue Dec 14 19:38:50 2010
> > Elapsed: 5733 seconds
> >
> > These packages failed to build:
> > libXrender Build Failed
> >
> > Exiting on error or interrupt
> > ============================================
> >
> >
> >
> >
> >> ----- Messaggio originale ----- Da: "Enrico Miglino‎" 
> >> <address@hidden>
> >> A: address@hidden
> >> cc: address@hidden
> >> Oggetto: Ri.: Re: Ri.: Re: Ri.: Re: [Ltib] RPB Build error fotr 
> >> packages   related to X11
> >> Data: Tue, 14 Dec 2010 14:40:11 +0100
> >>
> >>
> >> Hi, Stuart. Strange, eh???
> >>
> >> Sure. I try to explain more clear:
> >>
> >> 1) install ltib, set in the initial configuration EA3250 platform, 
> >> compile. I obtain an uImage that starts then loading the kernel, 
> >> after the display of the penguin logo image on the EA3250 screen 
> >> the console shows kernel panic. I don't matter, thinking that a 
> >> lot of things are missing.
> >>
> >> 2) start ./ltib -m configure (or --configure is the same), set 
> >> usb, peripherals etc. At this point what I expect is that the 
> >> kernel compile. With run-time errors, other panic or more 
> >> depending on the correctness of my configuration (I set also the 
> >> kernel drivers and parameters accordingly with the paltform 
> >> hardware).
> >> At this point, nothing works. Everytime I compile I obtain errors 
> >> on rpm, different depending by the configuration. And I can't 
> >> focus wht is the point.
> >>
> >> The only solution I can imagine is: remove all again, reinstall 
> >> ltib, create the initial configuration and try to setup one thing 
> >> at a time, but I think maybe some other wrong that i don't know...
> >>
> >> Enrico
> >>
> >>
> >>
> >>
> >>> ----- Messaggio originale ----- Da: address@hidden
> >>> A: "Enrico Miglino‎" <address@hidden>
> >>> cc: "Stuart Hughes‎" <address@hidden>, address@hidden
> >>> Oggetto: Re: Ri.: Re: Ri.: Re: [Ltib] RPB Build error fotr 
> >>> packages related  to X11
> >>> Data: Tue, 14 Dec 2010 08:19:20 -0500
> >>>
> >>>
> >>> Hi Enrico,
> >>>
> >>> I'm not quite sure I understand.
> >>>
> >>> Are you saying that the build is okay if you use the default kernel
> >>> configuration, but it fails if you change the kernel configuration?
> >>>
> >>> Regards, Stuart
> >>>
> >>>
> >>>> Hi Stuart,
> >>>>
> >>>> In these days I removed the linux* directory from rpm/BUILD as you
> >>>> suggested, and the whole build restarted.
> >>>> Immediately after I downloaded ltib (after installation) I tried to
> >>>> compile a uImage only indicating the platform EA3250 and leaving all the
> >>>> default values.
> >>>> The toolchain generated an image that starts showing the linux penguin on
> >>>> the EA3250 screen but in console what appear is a "starting kernel" then 
> >>>> a
> >>>> "kernel panic" message and all stops.
> >>>>
> >>>> Ok, It seems me obvious. I configured the kernel with the needed
> >>>> components and restarted a build. After the problem I tried to solve as
> >>>> you suggested and now after my last configuration compile starts and
> >>>> create and error. I tried several ways, but if I configure the board the
> >>>> compilation never complete. I have no difficult to download again ltib 
> >>>> and
> >>>> reinstall, but I think I'm doing something incorrect or miss some passage
> >>>> or parameter...
> >>>>
> >>>> The ltib tar copy I'm using to startup is the file ltib-10-1-1a-sv.tar.gz
> >>>>
> >>>> Thank you for your support.
> >>>> Enrico
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>> ----- Messaggio originale -----
> >>>>> Da: "Stuart Hughes‎" <address@hidden>
> >>>>> A: "Enrico Miglino‎" <address@hidden>
> >>>>> Oggetto: Re: Ri.: Re: [Ltib] RPB Build error fotr packages related to
> >>>>> X11
> >>>>> Data: Fri, 10 Dec 2010 18:21:25 +0000
> >>>>>
> >>>>>
> >>>>> Hi Enrico,
> >>>>>
> >>>>> Please keep emails on the list.
> >>>>>
> >>>>> It looks as though your kernel sources may be incomplete.  Provided
> >>>>> you've not been working on the kernel, remove rpm/BUILD/linux* and
> >>>>> re-try.
> >>>>>
> >>>>> Regards, Stuart
> >>>>>
> >>>>>
> >>>>> Enrico Miglino wrote:
> >>>>>> Hi Stuart, here follows the output of my last ./ltib build (without
> >>>>>> --continue)
> >>>>>>
> >>>>>> I also checked gcc in ltib shell mode, and it seems ok.
> >>>>>>
> >>>>>> ==========================================
> >>>>>> LTIB> gcc -v
> >>>>>> Using built-in specs.
> >>>>>> Target: arm-none-linux-gnueabi
> >>>>>> Configured with:
> >>>>>> /usr/src/redhat/BUILD/cross-mlib/source/gcc-4.1.2/configure
> >>>>>> --target=arm-none-linux-gnueabi --host=i686-host_pc-linux-gnu
> >>> --prefix=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi
> >>> --with-sysroot=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/arm-none-linux-gnueabi/sysroot
> >>>>> --enable-threads --enable-shared --disable-libssp --disable-libgomp
> >>>>> --disable-libmudflap --enable-languages=c,c++ --enable-__cxa_atexit
> >>>>>> --disable-nls
> >>>>>> Thread model: posix
> >>>>>> gcc version 4.1.2
> >>>>>> ==========================================
> >>>>>>
> >>>>>>
> >>>>>> BUILD CONSOLE OUTPUT:
> >>>>>>
> >>>>>>
> >>>>>> Processing platform: Embedded Artists LPC3250 OEM Board with the
> >>>>>> NXP LPC32XX SoC
> >>> ==================================================================================
> >>>>>> using config/platform/ea3250/.config
> >>>>>> PKG_KERNEL_WANT_CF has changed, kernel-2.6.27.8-lpc32xx needs a
> >>>>> rebuild
> >>>>>> PKG_KERNEL_LEAVESRC has changed, kernel-2.6.27.8-lpc32xx needs a
> >>>>> rebuild
> >>>>>> Processing: fake-provides
> >>>>>> ===========================
> >>>>>> Build path taken because: no prebuilt rpm, rpmbuild --dbpath
> >>>>>> /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define
> >>>>>> '_unpackaged_files_terminate_build 0' --define '_target_cpu arm'
> >>>>>> --define '__strip strip' --define '_topdir
> >>>>>> /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define
> >>>>>> '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir
> >>>>>> /home/enrico/ltib/EA3250/rpm/RPMS'  --define '_mandir
> >>>>>> /usr/share/man' --define '_sysconfdir /etc' --define
> >>>>>> '_localstatedir /var' -bb --clean --rmsource
> >>>>>> /home/enrico/ltib/EA3250/dist/lfs-5.1/fake-provides/fake-provides.spec
> >>>>>> Building target platforms: arm
> >>>>>> Building for target arm
> >>>>>> Executing(%prep): /bin/sh -e
> >>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301
> >>>>>> + umask 022
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD
> >>>>>> + exit 0
> >>>>>> Executing(%build): /bin/sh -e
> >>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301
> >>>>>> + umask 022
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD
> >>>>>> + exit 0
> >>>>>> Executing(%install): /bin/sh -e
> >>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301
> >>>>>> + umask 022
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD
> >>>>>> + rm -rf /tmp/fake-provides-1.0
> >>>>>> Processing files: fake-provides-1.0-5
> >>>>>> Provides: /bin/sh /bin/bash /bin/csh /bin/tcsh /usr/bin/env
> >>>>>> /usr/bin/perl /usr/local/bin/perl libgcc_s.so.1
> >>>>>> libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GLIBC_2.0) /bin/gawk
> >>>>>> /usr/bin/nawk /usr/bin/awk /usr/bin/bash perl 5.8.0
> >>>>>> perl(Getopt::Long) perl(Getopt::Std) perl(constant)
> >>>>>> perl(getopts.pl) perl(strict) perl(vars) perl(Carp) perl(Cwd)
> >>>>>> perl(Data::Dumper) perl(DynaLoader) perl(Exporter)
> >>>>>> perl(File::Basename) perl(File::Compare) perl(File::Copy)
> >>>>>> perl(File::Find) perl(File::Spec) perl(File::stat) perl(IO::File)
> >>>>>> perl(POSIX) perl(Text::ParseWords) libstdc++.so.5
> >>>>>> libstdc++.so.5(CXXABI_1.2) libstdc++.so.5(GLIBCPP_3.2)
> >>>>>> libstdc++.so.5(GLIBCPP_3.2.1) /bin/rm /sbin/ldconfig
> >>>>>> /sbin/chkconfig linux-gate.so.1
> >>>>>> PreReq: rpmlib(PayloadFilesHavePrefix) <= 4.0-1
> >>>>>> rpmlib(CompressedFileNames) <= 3.0.4-1
> >>>>>> Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1
> >>>>>> rpmlib(CompressedFileNames) <= 3.0.4-1
> >>>>>> Wrote:
> >>>>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/fake-provides-1.0-5.arm.rpm
> >>>>>> Executing(%clean): /bin/sh -e
> >>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301
> >>>>>> + umask 022
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD
> >>>>>> + rm -rf /tmp/fake-provides-1.0
> >>>>>> + exit 0
> >>>>>> Executing(--clean): /bin/sh -e
> >>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.15363
> >>>>>> + umask 022
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD
> >>>>>> + exit 0
> >>>>>> Build time for fake-provides: 1 seconds
> >>>>>>
> >>>>>> sudo /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs
> >>>>>> --dbpath /var/lib/rpm -e --allmatches --nodeps --noscripts --define
> >>>>>> '_tmppath /tmp/ltib' fake-provides 2>/dev/null
> >>>>>> sudo /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs
> >>>>>> --dbpath /var/lib/rpm --prefix / --ignorearch -ivh --force
> >>>>>> --excludedocs --noscripts --define '_tmppath /tmp/ltib'
> >>>>>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/fake-provides-1.0-5.arm.rpm
> >>>>>> error: failed to stat /home/enrico/.gvfs: Permission denied
> >>>>>> Preparing...
> >>>>>> ########################################### [100%]
> >>>>>>
> >>>>>> Processing: kernel-2.6.27.8-lpc32xx
> >>>>>> =====================================
> >>>>>> Build path taken because: directory build, build key set, no
> >>>>>> prebuilt rpm, scbuild/scdeploy already unpacked package
> >>>>>>
> >>>>>> Processing: kernel-2.6.27.8-lpc32xx
> >>>>>> =====================================
> >>>>>> Build path taken because: directory build, build key set, no
> >>>>>> prebuilt rpm, rpmbuild --dbpath
> >>>>>> /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define
> >>>>>> '_unpackaged_files_terminate_build 0' --define '_target_cpu arm'
> >>>>>> --define '__strip strip' --define '_topdir
> >>>>>> /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define
> >>>>>> '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir
> >>>>>> /home/enrico/ltib/EA3250/rpm/RPMS'  --define '_mandir
> >>>>>> /usr/share/man' --define '_sysconfdir /etc' --define
> >>>>>> '_localstatedir /var' -bc --short-circuit
> >>>>>> /home/enrico/ltib/EA3250/tmp/kernel-2.6.27.8-lpc32xx.spec
> >>>>>> Building target platforms: arm
> >>>>>> Building for target arm
> >>>>>> Executing(%build): /bin/sh -e
> >>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652
> >>>>>> + umask 022
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD
> >>>>>> + cd linux-2.6.27.8
> >>>>>> + eval echo
> >>>>>> + echo
> >>>>>> + PKG_KERNEL_PATH_PRECONFIG=
> >>>>>> + eval echo
> >>>>>> + echo
> >>>>>> + PKG_KERNEL_KBUILD_PRECONFIG=
> >>>>>> + eval echo linux-2.6.27.8-ea3250.config
> >>>>>> + echo linux-2.6.27.8-ea3250.config
> >>>>>> + PKG_KERNEL_PRECONFIG=linux-2.6.27.8-ea3250.config
> >>>>>> + KSRC_DIR=/home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8
> >>>>>> + : arm
> >>>>>> + : ccache /usr/bin/gcc -B/usr/bin//
> >>>>>> + : linux-2.6.27.8-ea3250.config
> >>>>>> + : /home/enrico/ltib/EA3250/config/platform/ea3250
> >>>>>> + : /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8
> >>>>>> + rm -f /home/enrico/ltib/EA3250/rpm/BUILD/linux
> >>>>>> + ln -s /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8
> >>>>>> /home/enrico/ltib/EA3250/rpm/BUILD/linux
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8
> >>>>>> + KBOUT=
> >>>>>> + [ -n  -a  != . ]
> >>>>>> + KBOUT=.
> >>>>>> + KTARG=zImage
> >>>>>> + SYSCFG_KTARG=uImage
> >>>>>> + [ linux-2.6.27.8-ea3250.config = defconfig ]
> >>>>>> + [ -f
> >>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config.dev
> >>>>>> ]
> >>>>>> + [ -f
> >>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
> >>>>>> ]
> >>>>>> +
> >>> CFG_PATH=/home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
> >>>>>> + break
> >>>>>> + [ -z
> >>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
> >>>>>> ]
> >>>>>> + [ arm = ppc -a -f arch/powerpc/Kconfig ]
> >>>>>> + [ -n  ]
> >>>>>> + [ -n
> >>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
> >>>>>> ]
> >>>>>> + cp -f
> >>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
> >>>>>> ./.config
> >>>>>> + [ -z  -a -n  -o -n  ]
> >>>>>> + [ -n
> >>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
> >>>>>> ]
> >>>>>> + make ARCH=arm HOSTCC=ccache /usr/bin/gcc -B/usr/bin// oldconfig
> >>>>>> + yes make: *** No rule to make target `oldconfig'.  Stop.
> >>>>>> error: Bad exit status from
> >>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652 (%build)
> >>>>>>
> >>>>>>
> >>>>>> RPM build errors:
> >>>>>>     Bad exit status from /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652
> >>>>> (%build)
> >>>>>> Build time for kernel-2.6.27.8-lpc32xx: 0 seconds
> >>>>>>
> >>>>>> Failed building kernel-2.6.27.8-lpc32xx
> >>>>>>
> >>>>>>
> >>>>>> f_buildrpms() returned an error, exiting
> >>>>>> traceback:
> >>>>>>  main:561
> >>>>>>
> >>>>>>
> >>>>>> Started: Fri Dec 10 15:07:17 2010
> >>>>>> Ended:   Fri Dec 10 15:07:36 2010
> >>>>>> Elapsed: 19 seconds
> >>>>>>
> >>>>>> These packages failed to build:
> >>>>>> kernel-2.6.27.8-lpc32xx Build Failed
> >>>>>>
> >>>>>> Exiting on error or interrupt
> >>>>>> address@hidden:~/ltib/EA3250$
> >>>>>>> ----- Messaggio originale ----- Da: "Stuart Hughes‎" <address@hidden>
> >>>>>>> A: "Enrico Miglino‎" <address@hidden>
> >>>>>>> cc: address@hidden
> >>>>>>> Oggetto: Re: [Ltib] RPB Build error fotr packages related to X11
> >>>>>>> Data: Fri, 10 Dec 2010 12:47:01 +0000
> >>>>>>>
> >>>>>>>
> >>>>>>> Hi Enrico,
> >>>>>>>
> >>>>>>> If base_libs fails then any dependent fail.
> >>>>>>>
> >>>>>>> Despite advice from others, unless you're running an autobuilder,
> >>>>> don't
> >>>>>>> use --continue.
> >>>>>>>
> >>>>>>> Please past the output of the base_libs failure.
> >>>>>>>
> >>>>>>> Also, check that the toolchain you're using is actually installed:
> >>>>>>> $ ./ltib -m shell
> >>>>>>> LTIB> gcc -v
> >>>>>>>
> >>>>>>> Regards, Stuart
> >>>>>>>
> >>>>>>> Enrico Miglino wrote:
> >>>>>>>> Hi,
> >>>>>>>>
> >>>>>>>> after a compete build for EA3250 platform I tried to add in
> >>>>>>>> configuration (with ./ltib -m config) X11 server and the
> >>>>>>>> essential X11  modules, obating as a result that the build
> >>>>>>>> process hangs with messages  like this (tried to change some
> >>>>>>>> configuration parameters but the  problemis even the same):
> >>>>>>>>
> >>>>>>>> START
> >>>>>>>>
> >>> ===================================================================sudo
> >>>>>>>> /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs
> >>>>>>>> --dbpath  /var/lib/rpm --prefix / --ignorearch -ivh --force
> >>>>>>>> --excludedocs  --noscripts --define '_tmppath /tmp/ltib'
> >>>>>>>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/modeps-1.0-1.arm.rpm
> >>>>>>>> error: failed to stat /home/enrico/.gvfs: Permission denied
> >>>>>>>> Preparing...
> >>>>>>>> ########################################### [100%]
> >>>>>>>> 1:modeps                 ###########################################
> >>>>> [100%]
> >>>>>>>>
> >>>>>>>> f_buildrpms() returned an error, exiting
> >>>>>>>> traceback:
> >>>>>>>> main:561
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> Started: Wed Dec  8 23:00:47 2010
> >>>>>>>> Ended:   Wed Dec  8 23:10:20 2010
> >>>>>>>> Elapsed: 573 seconds
> >>>>>>>>
> >>>>>>>> These packages failed to build:
> >>>>>>>> base_libs libXt libXmu
> >>>>>>>> ==================================================================
> >>>>>>>> END
> >>>>>>>>
> >>>>>>>> Note that I'm workin on ubuntu 10.04 32 bit and I already set
> >>>>>>>> /opt with a 777 permissions.
> >>>>>>>>
> >>>>>>>> Thanks. Enrico
> >>>>>>>>
> >>>>>>>> --------------------------------------------------------------
> >>>>>>>> Ovi Mail: Making email access easy
> >>>>>>>> http://mail.ovi.com
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> _______________________________________________
> >>>>>>>> LTIB home page: http://ltib.org
> >>>>>>>>
> >>>>>>>> Ltib mailing list
> >>>>>>>> address@hidden
> >>>>>>>> http://lists.nongnu.org/mailman/listinfo/ltib
> >>>>>>>>
> >>>>>> --------------------------------------------------------------
> >>>>>> Ovi Mail: Making email access easy
> >>>>>> http://mail.ovi.com
> >>>>>>
> >>>>>>
> >>>> --------------------------------------------------------------
> >>>> Ovi Mail: Making email access easy
> >>>> http://mail.ovi.com
> >>>>
> >>>>
> >> --------------------------------------------------------------
> >> Ovi Mail: Making email access easy
> >> http://mail.ovi.com
> >>
> >>
> >> _______________________________________________
> >> LTIB home page: http://ltib.org
> >>
> >> Ltib mailing list
> >> address@hidden
> >> http://lists.nongnu.org/mailman/listinfo/ltib
> >>
> >
> > --------------------------------------------------------------
> > Ovi Mail: Making email access easy
> > http://mail.ovi.com
> >
> >
> << ltib-x11-selected.png >>
>

--------------------------------------------------------------
Ovi Mail: Making email access easy
http://mail.ovi.com