Re: Ri.: Re: [Ltib] Build error fotr packages related to X11

[Stuart Hughes]

Hi Enrico,

the --- is okay, it just means it was selected as a dependency.

Regards, Stuart

Enrico Miglino wrote:
> Hi again ... :)
> 
> I checked just now with my last try. For example, package libxt is marked 
> with "---" in the X11 section, libraries. And the build stops with the 
> message that the package "libxt" can't be compiled...
> 
> Now I check for a different download version, then  I have no ideas. 
> 
> Enrico
> 
> 
> 
> 
>> ----- Messaggio originale ----- 
>> Da: "Stuart Hughes‎" <address@hidden>
>> A: "Enrico Miglino‎" <address@hidden>
>> cc: address@hidden
>> Oggetto: Re: [Ltib] Build error fotr packages related to X11
>> Data: Tue, 14 Dec 2010 19:51:11 +0000
>>
>>
>> Hi Enrico,
>>
>> Run ./ltib  --config and navigate to:
>>
>> Package list  --->  X11  --->
>>
>> Make sure "Install X11" is set.  I've attached a screen dump to show this.
>>
>> Regards, Stuart
>>
>>
>> Enrico Miglino wrote:
>>> Hi to all
>>>
>>> I create another fresh ltib install, and started again! After 
>>> platform setting (EA3250) I set a minimal configuration for linux 
>>> and proceeded to build.
>>>
>>> After all the process, up to an hour, ltib build stops  with the 
>>> fololowing message:
>>>
>>> I left a lot of defaults and changed only the indispensable, but 
>>> the error remain. Now I try to build with --continue, but it seems 
>>> a nonsense... The idea I have is that something is omitted, or is 
>>> wrong. I already changed permissions in ubuntu 10.04 for /opt 
>>> directory, I'm ignoring the error about .gvfs directory 
>>> permissions, but I can't compile.
>>>
>>> Thanks, Enrico
>>>
>>> ==========================
>>> checking for X... configure: error: Package requirements (x11) were not met:
>>>
>>> No package 'x11' found
>>>
>>> Consider adjusting the PKG_CONFIG_PATH environment variable if you
>>> installed software in a non-standard prefix.
>>>
>>> Alternatively, you may set the environment variables X_CFLAGS
>>> and X_LIBS to avoid the need to call pkg-config.
>>> See the pkg-config man page for more details.
>>>
>>> error: Bad exit status from 
>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.74359 (%build)
>>>
>>>
>>> RPM build errors:
>>>     Bad exit status from /home/enrico/ltib/EA3250/tmp/rpm-tmp.74359 (%build)
>>> Build time for libXrender: 16 seconds
>>>
>>> Failed building libXrender
>>>
>>>
>>> f_buildrpms() returned an error, exiting
>>> traceback:
>>>  main:561
>>>
>>>
>>> Started: Tue Dec 14 18:03:17 2010
>>> Ended:   Tue Dec 14 19:38:50 2010
>>> Elapsed: 5733 seconds
>>>
>>> These packages failed to build:
>>> libXrender Build Failed
>>>
>>> Exiting on error or interrupt
>>> ============================================
>>>
>>>
>>>
>>>
>>>> ----- Messaggio originale ----- Da: "Enrico Miglino‎" 
>>>> <address@hidden>
>>>> A: address@hidden
>>>> cc: address@hidden
>>>> Oggetto: Ri.: Re: Ri.: Re: Ri.: Re: [Ltib] RPB Build error fotr 
>>>> packages   related to X11
>>>> Data: Tue, 14 Dec 2010 14:40:11 +0100
>>>>
>>>>
>>>> Hi, Stuart. Strange, eh???
>>>>
>>>> Sure. I try to explain more clear:
>>>>
>>>> 1) install ltib, set in the initial configuration EA3250 platform, 
>>>> compile. I obtain an uImage that starts then loading the kernel, 
>>>> after the display of the penguin logo image on the EA3250 screen 
>>>> the console shows kernel panic. I don't matter, thinking that a 
>>>> lot of things are missing.
>>>>
>>>> 2) start ./ltib -m configure (or --configure is the same), set 
>>>> usb, peripherals etc. At this point what I expect is that the 
>>>> kernel compile. With run-time errors, other panic or more 
>>>> depending on the correctness of my configuration (I set also the 
>>>> kernel drivers and parameters accordingly with the paltform 
>>>> hardware).
>>>> At this point, nothing works. Everytime I compile I obtain errors 
>>>> on rpm, different depending by the configuration. And I can't 
>>>> focus wht is the point.
>>>>
>>>> The only solution I can imagine is: remove all again, reinstall 
>>>> ltib, create the initial configuration and try to setup one thing 
>>>> at a time, but I think maybe some other wrong that i don't know...
>>>>
>>>> Enrico
>>>>
>>>>
>>>>
>>>>
>>>>> ----- Messaggio originale ----- Da: address@hidden
>>>>> A: "Enrico Miglino‎" <address@hidden>
>>>>> cc: "Stuart Hughes‎" <address@hidden>, address@hidden
>>>>> Oggetto: Re: Ri.: Re: Ri.: Re: [Ltib] RPB Build error fotr 
>>>>> packages related  to X11
>>>>> Data: Tue, 14 Dec 2010 08:19:20 -0500
>>>>>
>>>>>
>>>>> Hi Enrico,
>>>>>
>>>>> I'm not quite sure I understand.
>>>>>
>>>>> Are you saying that the build is okay if you use the default kernel
>>>>> configuration, but it fails if you change the kernel configuration?
>>>>>
>>>>> Regards, Stuart
>>>>>
>>>>>
>>>>>> Hi Stuart,
>>>>>>
>>>>>> In these days I removed the linux* directory from rpm/BUILD as you
>>>>>> suggested, and the whole build restarted.
>>>>>> Immediately after I downloaded ltib (after installation) I tried to
>>>>>> compile a uImage only indicating the platform EA3250 and leaving all the
>>>>>> default values.
>>>>>> The toolchain generated an image that starts showing the linux penguin on
>>>>>> the EA3250 screen but in console what appear is a "starting kernel" then 
>>>>>> a
>>>>>> "kernel panic" message and all stops.
>>>>>>
>>>>>> Ok, It seems me obvious. I configured the kernel with the needed
>>>>>> components and restarted a build. After the problem I tried to solve as
>>>>>> you suggested and now after my last configuration compile starts and
>>>>>> create and error. I tried several ways, but if I configure the board the
>>>>>> compilation never complete. I have no difficult to download again ltib 
>>>>>> and
>>>>>> reinstall, but I think I'm doing something incorrect or miss some passage
>>>>>> or parameter...
>>>>>>
>>>>>> The ltib tar copy I'm using to startup is the file ltib-10-1-1a-sv.tar.gz
>>>>>>
>>>>>> Thank you for your support.
>>>>>> Enrico
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> ----- Messaggio originale -----
>>>>>>> Da: "Stuart Hughes‎" <address@hidden>
>>>>>>> A: "Enrico Miglino‎" <address@hidden>
>>>>>>> Oggetto: Re: Ri.: Re: [Ltib] RPB Build error fotr packages related to
>>>>>>> X11
>>>>>>> Data: Fri, 10 Dec 2010 18:21:25 +0000
>>>>>>>
>>>>>>>
>>>>>>> Hi Enrico,
>>>>>>>
>>>>>>> Please keep emails on the list.
>>>>>>>
>>>>>>> It looks as though your kernel sources may be incomplete.  Provided
>>>>>>> you've not been working on the kernel, remove rpm/BUILD/linux* and
>>>>>>> re-try.
>>>>>>>
>>>>>>> Regards, Stuart
>>>>>>>
>>>>>>>
>>>>>>> Enrico Miglino wrote:
>>>>>>>> Hi Stuart, here follows the output of my last ./ltib build (without
>>>>>>>> --continue)
>>>>>>>>
>>>>>>>> I also checked gcc in ltib shell mode, and it seems ok.
>>>>>>>>
>>>>>>>> ==========================================
>>>>>>>> LTIB> gcc -v
>>>>>>>> Using built-in specs.
>>>>>>>> Target: arm-none-linux-gnueabi
>>>>>>>> Configured with:
>>>>>>>> /usr/src/redhat/BUILD/cross-mlib/source/gcc-4.1.2/configure
>>>>>>>> --target=arm-none-linux-gnueabi --host=i686-host_pc-linux-gnu
>>>>> --prefix=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi
>>>>> --with-sysroot=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/arm-none-linux-gnueabi/sysroot
>>>>>>> --enable-threads --enable-shared --disable-libssp --disable-libgomp
>>>>>>> --disable-libmudflap --enable-languages=c,c++ --enable-__cxa_atexit
>>>>>>>> --disable-nls
>>>>>>>> Thread model: posix
>>>>>>>> gcc version 4.1.2
>>>>>>>> ==========================================
>>>>>>>>
>>>>>>>>
>>>>>>>> BUILD CONSOLE OUTPUT:
>>>>>>>>
>>>>>>>>
>>>>>>>> Processing platform: Embedded Artists LPC3250 OEM Board with the
>>>>>>>> NXP LPC32XX SoC
>>>>> ==================================================================================
>>>>>>>> using config/platform/ea3250/.config
>>>>>>>> PKG_KERNEL_WANT_CF has changed, kernel-2.6.27.8-lpc32xx needs a
>>>>>>> rebuild
>>>>>>>> PKG_KERNEL_LEAVESRC has changed, kernel-2.6.27.8-lpc32xx needs a
>>>>>>> rebuild
>>>>>>>> Processing: fake-provides
>>>>>>>> ===========================
>>>>>>>> Build path taken because: no prebuilt rpm, rpmbuild --dbpath
>>>>>>>> /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define
>>>>>>>> '_unpackaged_files_terminate_build 0' --define '_target_cpu arm'
>>>>>>>> --define '__strip strip' --define '_topdir
>>>>>>>> /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define
>>>>>>>> '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir
>>>>>>>> /home/enrico/ltib/EA3250/rpm/RPMS'  --define '_mandir
>>>>>>>> /usr/share/man' --define '_sysconfdir /etc' --define
>>>>>>>> '_localstatedir /var' -bb --clean --rmsource
>>>>>>>> /home/enrico/ltib/EA3250/dist/lfs-5.1/fake-provides/fake-provides.spec
>>>>>>>> Building target platforms: arm
>>>>>>>> Building for target arm
>>>>>>>> Executing(%prep): /bin/sh -e
>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301
>>>>>>>> + umask 022
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD
>>>>>>>> + exit 0
>>>>>>>> Executing(%build): /bin/sh -e
>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301
>>>>>>>> + umask 022
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD
>>>>>>>> + exit 0
>>>>>>>> Executing(%install): /bin/sh -e
>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301
>>>>>>>> + umask 022
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD
>>>>>>>> + rm -rf /tmp/fake-provides-1.0
>>>>>>>> Processing files: fake-provides-1.0-5
>>>>>>>> Provides: /bin/sh /bin/bash /bin/csh /bin/tcsh /usr/bin/env
>>>>>>>> /usr/bin/perl /usr/local/bin/perl libgcc_s.so.1
>>>>>>>> libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GLIBC_2.0) /bin/gawk
>>>>>>>> /usr/bin/nawk /usr/bin/awk /usr/bin/bash perl 5.8.0
>>>>>>>> perl(Getopt::Long) perl(Getopt::Std) perl(constant)
>>>>>>>> perl(getopts.pl) perl(strict) perl(vars) perl(Carp) perl(Cwd)
>>>>>>>> perl(Data::Dumper) perl(DynaLoader) perl(Exporter)
>>>>>>>> perl(File::Basename) perl(File::Compare) perl(File::Copy)
>>>>>>>> perl(File::Find) perl(File::Spec) perl(File::stat) perl(IO::File)
>>>>>>>> perl(POSIX) perl(Text::ParseWords) libstdc++.so.5
>>>>>>>> libstdc++.so.5(CXXABI_1.2) libstdc++.so.5(GLIBCPP_3.2)
>>>>>>>> libstdc++.so.5(GLIBCPP_3.2.1) /bin/rm /sbin/ldconfig
>>>>>>>> /sbin/chkconfig linux-gate.so.1
>>>>>>>> PreReq: rpmlib(PayloadFilesHavePrefix) <= 4.0-1
>>>>>>>> rpmlib(CompressedFileNames) <= 3.0.4-1
>>>>>>>> Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1
>>>>>>>> rpmlib(CompressedFileNames) <= 3.0.4-1
>>>>>>>> Wrote:
>>>>>>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/fake-provides-1.0-5.arm.rpm
>>>>>>>> Executing(%clean): /bin/sh -e
>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301
>>>>>>>> + umask 022
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD
>>>>>>>> + rm -rf /tmp/fake-provides-1.0
>>>>>>>> + exit 0
>>>>>>>> Executing(--clean): /bin/sh -e
>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.15363
>>>>>>>> + umask 022
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD
>>>>>>>> + exit 0
>>>>>>>> Build time for fake-provides: 1 seconds
>>>>>>>>
>>>>>>>> sudo /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs
>>>>>>>> --dbpath /var/lib/rpm -e --allmatches --nodeps --noscripts --define
>>>>>>>> '_tmppath /tmp/ltib' fake-provides 2>/dev/null
>>>>>>>> sudo /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs
>>>>>>>> --dbpath /var/lib/rpm --prefix / --ignorearch -ivh --force
>>>>>>>> --excludedocs --noscripts --define '_tmppath /tmp/ltib'
>>>>>>>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/fake-provides-1.0-5.arm.rpm
>>>>>>>> error: failed to stat /home/enrico/.gvfs: Permission denied
>>>>>>>> Preparing...
>>>>>>>> ########################################### [100%]
>>>>>>>>
>>>>>>>> Processing: kernel-2.6.27.8-lpc32xx
>>>>>>>> =====================================
>>>>>>>> Build path taken because: directory build, build key set, no
>>>>>>>> prebuilt rpm, scbuild/scdeploy already unpacked package
>>>>>>>>
>>>>>>>> Processing: kernel-2.6.27.8-lpc32xx
>>>>>>>> =====================================
>>>>>>>> Build path taken because: directory build, build key set, no
>>>>>>>> prebuilt rpm, rpmbuild --dbpath
>>>>>>>> /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define
>>>>>>>> '_unpackaged_files_terminate_build 0' --define '_target_cpu arm'
>>>>>>>> --define '__strip strip' --define '_topdir
>>>>>>>> /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define
>>>>>>>> '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir
>>>>>>>> /home/enrico/ltib/EA3250/rpm/RPMS'  --define '_mandir
>>>>>>>> /usr/share/man' --define '_sysconfdir /etc' --define
>>>>>>>> '_localstatedir /var' -bc --short-circuit
>>>>>>>> /home/enrico/ltib/EA3250/tmp/kernel-2.6.27.8-lpc32xx.spec
>>>>>>>> Building target platforms: arm
>>>>>>>> Building for target arm
>>>>>>>> Executing(%build): /bin/sh -e
>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652
>>>>>>>> + umask 022
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD
>>>>>>>> + cd linux-2.6.27.8
>>>>>>>> + eval echo
>>>>>>>> + echo
>>>>>>>> + PKG_KERNEL_PATH_PRECONFIG=
>>>>>>>> + eval echo
>>>>>>>> + echo
>>>>>>>> + PKG_KERNEL_KBUILD_PRECONFIG=
>>>>>>>> + eval echo linux-2.6.27.8-ea3250.config
>>>>>>>> + echo linux-2.6.27.8-ea3250.config
>>>>>>>> + PKG_KERNEL_PRECONFIG=linux-2.6.27.8-ea3250.config
>>>>>>>> + KSRC_DIR=/home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8
>>>>>>>> + : arm
>>>>>>>> + : ccache /usr/bin/gcc -B/usr/bin//
>>>>>>>> + : linux-2.6.27.8-ea3250.config
>>>>>>>> + : /home/enrico/ltib/EA3250/config/platform/ea3250
>>>>>>>> + : /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8
>>>>>>>> + rm -f /home/enrico/ltib/EA3250/rpm/BUILD/linux
>>>>>>>> + ln -s /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8
>>>>>>>> /home/enrico/ltib/EA3250/rpm/BUILD/linux
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8
>>>>>>>> + KBOUT=
>>>>>>>> + [ -n  -a  != . ]
>>>>>>>> + KBOUT=.
>>>>>>>> + KTARG=zImage
>>>>>>>> + SYSCFG_KTARG=uImage
>>>>>>>> + [ linux-2.6.27.8-ea3250.config = defconfig ]
>>>>>>>> + [ -f
>>>>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config.dev
>>>>>>>> ]
>>>>>>>> + [ -f
>>>>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>>>>>>>> ]
>>>>>>>> +
>>>>> CFG_PATH=/home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>>>>>>>> + break
>>>>>>>> + [ -z
>>>>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>>>>>>>> ]
>>>>>>>> + [ arm = ppc -a -f arch/powerpc/Kconfig ]
>>>>>>>> + [ -n  ]
>>>>>>>> + [ -n
>>>>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>>>>>>>> ]
>>>>>>>> + cp -f
>>>>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>>>>>>>> ./.config
>>>>>>>> + [ -z  -a -n  -o -n  ]
>>>>>>>> + [ -n
>>>>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>>>>>>>> ]
>>>>>>>> + make ARCH=arm HOSTCC=ccache /usr/bin/gcc -B/usr/bin// oldconfig
>>>>>>>> + yes make: *** No rule to make target `oldconfig'.  Stop.
>>>>>>>> error: Bad exit status from
>>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652 (%build)
>>>>>>>>
>>>>>>>>
>>>>>>>> RPM build errors:
>>>>>>>>     Bad exit status from /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652
>>>>>>> (%build)
>>>>>>>> Build time for kernel-2.6.27.8-lpc32xx: 0 seconds
>>>>>>>>
>>>>>>>> Failed building kernel-2.6.27.8-lpc32xx
>>>>>>>>
>>>>>>>>
>>>>>>>> f_buildrpms() returned an error, exiting
>>>>>>>> traceback:
>>>>>>>>  main:561
>>>>>>>>
>>>>>>>>
>>>>>>>> Started: Fri Dec 10 15:07:17 2010
>>>>>>>> Ended:   Fri Dec 10 15:07:36 2010
>>>>>>>> Elapsed: 19 seconds
>>>>>>>>
>>>>>>>> These packages failed to build:
>>>>>>>> kernel-2.6.27.8-lpc32xx Build Failed
>>>>>>>>
>>>>>>>> Exiting on error or interrupt
>>>>>>>> address@hidden:~/ltib/EA3250$
>>>>>>>>> ----- Messaggio originale ----- Da: "Stuart Hughes‎" <address@hidden>
>>>>>>>>> A: "Enrico Miglino‎" <address@hidden>
>>>>>>>>> cc: address@hidden
>>>>>>>>> Oggetto: Re: [Ltib] RPB Build error fotr packages related to X11
>>>>>>>>> Data: Fri, 10 Dec 2010 12:47:01 +0000
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Hi Enrico,
>>>>>>>>>
>>>>>>>>> If base_libs fails then any dependent fail.
>>>>>>>>>
>>>>>>>>> Despite advice from others, unless you're running an autobuilder,
>>>>>>> don't
>>>>>>>>> use --continue.
>>>>>>>>>
>>>>>>>>> Please past the output of the base_libs failure.
>>>>>>>>>
>>>>>>>>> Also, check that the toolchain you're using is actually installed:
>>>>>>>>> $ ./ltib -m shell
>>>>>>>>> LTIB> gcc -v
>>>>>>>>>
>>>>>>>>> Regards, Stuart
>>>>>>>>>
>>>>>>>>> Enrico Miglino wrote:
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> after a compete build for EA3250 platform I tried to add in
>>>>>>>>>> configuration (with ./ltib -m config) X11 server and the
>>>>>>>>>> essential X11  modules, obating as a result that the build
>>>>>>>>>> process hangs with messages  like this (tried to change some
>>>>>>>>>> configuration parameters but the  problemis even the same):
>>>>>>>>>>
>>>>>>>>>> START
>>>>>>>>>>
>>>>> ===================================================================sudo
>>>>>>>>>> /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs
>>>>>>>>>> --dbpath  /var/lib/rpm --prefix / --ignorearch -ivh --force
>>>>>>>>>> --excludedocs  --noscripts --define '_tmppath /tmp/ltib'
>>>>>>>>>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/modeps-1.0-1.arm.rpm
>>>>>>>>>> error: failed to stat /home/enrico/.gvfs: Permission denied
>>>>>>>>>> Preparing...
>>>>>>>>>> ########################################### [100%]
>>>>>>>>>> 1:modeps                 ###########################################
>>>>>>> [100%]
>>>>>>>>>> f_buildrpms() returned an error, exiting
>>>>>>>>>> traceback:
>>>>>>>>>> main:561
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Started: Wed Dec  8 23:00:47 2010
>>>>>>>>>> Ended:   Wed Dec  8 23:10:20 2010
>>>>>>>>>> Elapsed: 573 seconds
>>>>>>>>>>
>>>>>>>>>> These packages failed to build:
>>>>>>>>>> base_libs libXt libXmu
>>>>>>>>>> ==================================================================
>>>>>>>>>> END
>>>>>>>>>>
>>>>>>>>>> Note that I'm workin on ubuntu 10.04 32 bit and I already set
>>>>>>>>>> /opt with a 777 permissions.
>>>>>>>>>>
>>>>>>>>>> Thanks. Enrico
>>>>>>>>>>
>>>>>>>>>> --------------------------------------------------------------
>>>>>>>>>> Ovi Mail: Making email access easy
>>>>>>>>>> http://mail.ovi.com
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> LTIB home page: http://ltib.org
>>>>>>>>>>
>>>>>>>>>> Ltib mailing list
>>>>>>>>>> address@hidden
>>>>>>>>>> http://lists.nongnu.org/mailman/listinfo/ltib
>>>>>>>>>>
>>>>>>>> --------------------------------------------------------------
>>>>>>>> Ovi Mail: Making email access easy
>>>>>>>> http://mail.ovi.com
>>>>>>>>
>>>>>>>>
>>>>>> --------------------------------------------------------------
>>>>>> Ovi Mail: Making email access easy
>>>>>> http://mail.ovi.com
>>>>>>
>>>>>>
>>>> --------------------------------------------------------------
>>>> Ovi Mail: Making email access easy
>>>> http://mail.ovi.com
>>>>
>>>>
>>>> _______________________________________________
>>>> LTIB home page: http://ltib.org
>>>>
>>>> Ltib mailing list
>>>> address@hidden
>>>> http://lists.nongnu.org/mailman/listinfo/ltib
>>>>
>>> --------------------------------------------------------------
>>> Ovi Mail: Making email access easy
>>> http://mail.ovi.com
>>>
>>>
>> << ltib-x11-selected.png >>
>>
> 
> --------------------------------------------------------------
> Ovi Mail: Making email access easy
> http://mail.ovi.com
> 
>