Re: Ri.: Re: [Ltib] Build error fotr packages related to X11

[Stuart Hughes]

Hi Enrico,

That snapshot is upgradable if you have internet access.  You can run:

$ cvs up -dP

This will pull the latest LTIB from CVS.  The main trunk is kept stable
and so this is recommended.

Regards, Stuart

Enrico Miglino wrote:
> Thank you very much, Stuart.
> After my last re-installation I'm proceeding step by step adding components. 
> I wrote "related to X11" because as I set X11 a compilation problem occours. 
> Now I'm following your advice, with a component at a time. I don't forgotten 
> to set X11 but my screen is slightly different from yours. I have only the 
> option for Xorg 7.x or "not install X11" Now I'm recompiling with xorg 
> activated. If there are other problems I send you a snapshot of my 
> configuration page. Is possible that my tar version is not the latest or is 
> wrong ? I downloaded the last file in the savannah site.
> 
> thanks again. Enrico
> 
> 
> 
> 
>> ----- Messaggio originale -----  
>> Da: "Stuart Hughes‎" <address@hidden> 
>> A: "Enrico Miglino‎" <address@hidden> 
>> cc: address@hidden 
>> Oggetto: Re: [Ltib] Build error fotr packages related to X11 
>> Data: Tue, 14 Dec 2010 19:51:11 +0000 
>>  
>>  
>> Hi Enrico, 
>>  
>> Run ./ltib  --config and navigate to: 
>>  
>> Package list  --->  X11  ---> 
>>  
>> Make sure "Install X11" is set.  I've attached a screen dump to show this. 
>>  
>> Regards, Stuart 
>>  
>>  
>> Enrico Miglino wrote: 
>>> Hi to all 
>>>
>>> I create another fresh ltib install, and started again! After  
>>> platform setting (EA3250) I set a minimal configuration for linux  
>>> and proceeded to build. 
>>>
>>> After all the process, up to an hour, ltib build stops  with the  
>>> fololowing message: 
>>>
>>> I left a lot of defaults and changed only the indispensable, but  
>>> the error remain. Now I try to build with --continue, but it seems  
>>> a nonsense... The idea I have is that something is omitted, or is  
>>> wrong. I already changed permissions in ubuntu 10.04 for /opt  
>>> directory, I'm ignoring the error about .gvfs directory  
>>> permissions, but I can't compile. 
>>>
>>> Thanks, Enrico 
>>>
>>> ========================== 
>>> checking for X... configure: error: Package requirements (x11) were not 
>>> met: 
>>>
>>> No package 'x11' found 
>>>
>>> Consider adjusting the PKG_CONFIG_PATH environment variable if you 
>>> installed software in a non-standard prefix. 
>>>
>>> Alternatively, you may set the environment variables X_CFLAGS 
>>> and X_LIBS to avoid the need to call pkg-config. 
>>> See the pkg-config man page for more details. 
>>>
>>> error: Bad exit status from  
>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.74359 (%build) 
>>>
>>>
>>> RPM build errors: 
>>>     Bad exit status from /home/enrico/ltib/EA3250/tmp/rpm-tmp.74359 
>>> (%build) 
>>> Build time for libXrender: 16 seconds 
>>>
>>> Failed building libXrender 
>>>
>>>
>>> f_buildrpms() returned an error, exiting 
>>> traceback: 
>>>  main:561 
>>>
>>>
>>> Started: Tue Dec 14 18:03:17 2010 
>>> Ended:   Tue Dec 14 19:38:50 2010 
>>> Elapsed: 5733 seconds 
>>>
>>> These packages failed to build: 
>>> libXrender Build Failed 
>>>
>>> Exiting on error or interrupt 
>>> ============================================ 
>>>
>>>
>>>
>>>
>>>> ----- Messaggio originale ----- Da: "Enrico Miglino‎"  
>>>> <address@hidden> 
>>>> A: address@hidden 
>>>> cc: address@hidden 
>>>> Oggetto: Ri.: Re: Ri.: Re: Ri.: Re: [Ltib] RPB Build error fotr  
>>>> packages   related to X11 
>>>> Data: Tue, 14 Dec 2010 14:40:11 +0100 
>>>>
>>>>
>>>> Hi, Stuart. Strange, eh??? 
>>>>
>>>> Sure. I try to explain more clear: 
>>>>
>>>> 1) install ltib, set in the initial configuration EA3250 platform,  
>>>> compile. I obtain an uImage that starts then loading the kernel,  
>>>> after the display of the penguin logo image on the EA3250 screen  
>>>> the console shows kernel panic. I don't matter, thinking that a  
>>>> lot of things are missing. 
>>>>
>>>> 2) start ./ltib -m configure (or --configure is the same), set  
>>>> usb, peripherals etc. At this point what I expect is that the  
>>>> kernel compile. With run-time errors, other panic or more  
>>>> depending on the correctness of my configuration (I set also the  
>>>> kernel drivers and parameters accordingly with the paltform  
>>>> hardware). 
>>>> At this point, nothing works. Everytime I compile I obtain errors  
>>>> on rpm, different depending by the configuration. And I can't  
>>>> focus wht is the point. 
>>>>
>>>> The only solution I can imagine is: remove all again, reinstall  
>>>> ltib, create the initial configuration and try to setup one thing  
>>>> at a time, but I think maybe some other wrong that i don't know... 
>>>>
>>>> Enrico 
>>>>
>>>>
>>>>
>>>>
>>>>> ----- Messaggio originale ----- Da: address@hidden 
>>>>> A: "Enrico Miglino‎" <address@hidden> 
>>>>> cc: "Stuart Hughes‎" <address@hidden>, address@hidden 
>>>>> Oggetto: Re: Ri.: Re: Ri.: Re: [Ltib] RPB Build error fotr  
>>>>> packages related  to X11 
>>>>> Data: Tue, 14 Dec 2010 08:19:20 -0500 
>>>>>
>>>>>
>>>>> Hi Enrico, 
>>>>>
>>>>> I'm not quite sure I understand. 
>>>>>
>>>>> Are you saying that the build is okay if you use the default kernel 
>>>>> configuration, but it fails if you change the kernel configuration? 
>>>>>
>>>>> Regards, Stuart 
>>>>>
>>>>>
>>>>>> Hi Stuart, 
>>>>>>
>>>>>> In these days I removed the linux* directory from rpm/BUILD as you 
>>>>>> suggested, and the whole build restarted. 
>>>>>> Immediately after I downloaded ltib (after installation) I tried to 
>>>>>> compile a uImage only indicating the platform EA3250 and leaving all the 
>>>>>> default values. 
>>>>>> The toolchain generated an image that starts showing the linux penguin 
>>>>>> on 
>>>>>> the EA3250 screen but in console what appear is a "starting kernel" then 
>>>>>> a 
>>>>>> "kernel panic" message and all stops. 
>>>>>>
>>>>>> Ok, It seems me obvious. I configured the kernel with the needed 
>>>>>> components and restarted a build. After the problem I tried to solve as 
>>>>>> you suggested and now after my last configuration compile starts and 
>>>>>> create and error. I tried several ways, but if I configure the board the 
>>>>>> compilation never complete. I have no difficult to download again ltib 
>>>>>> and 
>>>>>> reinstall, but I think I'm doing something incorrect or miss some 
>>>>>> passage 
>>>>>> or parameter... 
>>>>>>
>>>>>> The ltib tar copy I'm using to startup is the file 
>>>>>> ltib-10-1-1a-sv.tar.gz 
>>>>>>
>>>>>> Thank you for your support. 
>>>>>> Enrico 
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> ----- Messaggio originale ----- 
>>>>>>> Da: "Stuart Hughes‎" <address@hidden> 
>>>>>>> A: "Enrico Miglino‎" <address@hidden> 
>>>>>>> Oggetto: Re: Ri.: Re: [Ltib] RPB Build error fotr packages related to 
>>>>>>> X11 
>>>>>>> Data: Fri, 10 Dec 2010 18:21:25 +0000 
>>>>>>>
>>>>>>>
>>>>>>> Hi Enrico, 
>>>>>>>
>>>>>>> Please keep emails on the list. 
>>>>>>>
>>>>>>> It looks as though your kernel sources may be incomplete.  Provided 
>>>>>>> you've not been working on the kernel, remove rpm/BUILD/linux* and 
>>>>>>> re-try. 
>>>>>>>
>>>>>>> Regards, Stuart 
>>>>>>>
>>>>>>>
>>>>>>> Enrico Miglino wrote: 
>>>>>>>> Hi Stuart, here follows the output of my last ./ltib build (without 
>>>>>>>> --continue) 
>>>>>>>>
>>>>>>>> I also checked gcc in ltib shell mode, and it seems ok. 
>>>>>>>>
>>>>>>>> ========================================== 
>>>>>>>> LTIB> gcc -v 
>>>>>>>> Using built-in specs. 
>>>>>>>> Target: arm-none-linux-gnueabi 
>>>>>>>> Configured with: 
>>>>>>>> /usr/src/redhat/BUILD/cross-mlib/source/gcc-4.1.2/configure 
>>>>>>>> --target=arm-none-linux-gnueabi --host=i686-host_pc-linux-gnu 
>>>>> --prefix=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi
>>>>>  
>>>>> --with-sysroot=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/arm-none-linux-gnueabi/sysroot
>>>>>  
>>>>>>> --enable-threads --enable-shared --disable-libssp --disable-libgomp 
>>>>>>> --disable-libmudflap --enable-languages=c,c++ --enable-__cxa_atexit 
>>>>>>>> --disable-nls 
>>>>>>>> Thread model: posix 
>>>>>>>> gcc version 4.1.2 
>>>>>>>> ========================================== 
>>>>>>>>
>>>>>>>>
>>>>>>>> BUILD CONSOLE OUTPUT: 
>>>>>>>>
>>>>>>>>
>>>>>>>> Processing platform: Embedded Artists LPC3250 OEM Board with the 
>>>>>>>> NXP LPC32XX SoC 
>>>>> ==================================================================================
>>>>>  
>>>>>>>> using config/platform/ea3250/.config 
>>>>>>>> PKG_KERNEL_WANT_CF has changed, kernel-2.6.27.8-lpc32xx needs a 
>>>>>>> rebuild 
>>>>>>>> PKG_KERNEL_LEAVESRC has changed, kernel-2.6.27.8-lpc32xx needs a 
>>>>>>> rebuild 
>>>>>>>> Processing: fake-provides 
>>>>>>>> =========================== 
>>>>>>>> Build path taken because: no prebuilt rpm, rpmbuild --dbpath 
>>>>>>>> /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define 
>>>>>>>> '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' 
>>>>>>>> --define '__strip strip' --define '_topdir 
>>>>>>>> /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define 
>>>>>>>> '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir 
>>>>>>>> /home/enrico/ltib/EA3250/rpm/RPMS'  --define '_mandir 
>>>>>>>> /usr/share/man' --define '_sysconfdir /etc' --define 
>>>>>>>> '_localstatedir /var' -bb --clean --rmsource 
>>>>>>>> /home/enrico/ltib/EA3250/dist/lfs-5.1/fake-provides/fake-provides.spec 
>>>>>>>> Building target platforms: arm 
>>>>>>>> Building for target arm 
>>>>>>>> Executing(%prep): /bin/sh -e 
>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301 
>>>>>>>> + umask 022 
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD 
>>>>>>>> + exit 0 
>>>>>>>> Executing(%build): /bin/sh -e 
>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301 
>>>>>>>> + umask 022 
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD 
>>>>>>>> + exit 0 
>>>>>>>> Executing(%install): /bin/sh -e 
>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301 
>>>>>>>> + umask 022 
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD 
>>>>>>>> + rm -rf /tmp/fake-provides-1.0 
>>>>>>>> Processing files: fake-provides-1.0-5 
>>>>>>>> Provides: /bin/sh /bin/bash /bin/csh /bin/tcsh /usr/bin/env 
>>>>>>>> /usr/bin/perl /usr/local/bin/perl libgcc_s.so.1 
>>>>>>>> libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GLIBC_2.0) /bin/gawk 
>>>>>>>> /usr/bin/nawk /usr/bin/awk /usr/bin/bash perl 5.8.0 
>>>>>>>> perl(Getopt::Long) perl(Getopt::Std) perl(constant) 
>>>>>>>> perl(getopts.pl) perl(strict) perl(vars) perl(Carp) perl(Cwd) 
>>>>>>>> perl(Data::Dumper) perl(DynaLoader) perl(Exporter) 
>>>>>>>> perl(File::Basename) perl(File::Compare) perl(File::Copy) 
>>>>>>>> perl(File::Find) perl(File::Spec) perl(File::stat) perl(IO::File) 
>>>>>>>> perl(POSIX) perl(Text::ParseWords) libstdc++.so.5 
>>>>>>>> libstdc++.so.5(CXXABI_1.2) libstdc++.so.5(GLIBCPP_3.2) 
>>>>>>>> libstdc++.so.5(GLIBCPP_3.2.1) /bin/rm /sbin/ldconfig 
>>>>>>>> /sbin/chkconfig linux-gate.so.1 
>>>>>>>> PreReq: rpmlib(PayloadFilesHavePrefix) <= 4.0-1 
>>>>>>>> rpmlib(CompressedFileNames) <= 3.0.4-1 
>>>>>>>> Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 
>>>>>>>> rpmlib(CompressedFileNames) <= 3.0.4-1 
>>>>>>>> Wrote: 
>>>>>>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/fake-provides-1.0-5.arm.rpm 
>>>>>>>> Executing(%clean): /bin/sh -e 
>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301 
>>>>>>>> + umask 022 
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD 
>>>>>>>> + rm -rf /tmp/fake-provides-1.0 
>>>>>>>> + exit 0 
>>>>>>>> Executing(--clean): /bin/sh -e 
>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.15363 
>>>>>>>> + umask 022 
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD 
>>>>>>>> + exit 0 
>>>>>>>> Build time for fake-provides: 1 seconds 
>>>>>>>>
>>>>>>>> sudo /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs 
>>>>>>>> --dbpath /var/lib/rpm -e --allmatches --nodeps --noscripts --define 
>>>>>>>> '_tmppath /tmp/ltib' fake-provides 2>/dev/null 
>>>>>>>> sudo /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs 
>>>>>>>> --dbpath /var/lib/rpm --prefix / --ignorearch -ivh --force 
>>>>>>>> --excludedocs --noscripts --define '_tmppath /tmp/ltib' 
>>>>>>>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/fake-provides-1.0-5.arm.rpm 
>>>>>>>> error: failed to stat /home/enrico/.gvfs: Permission denied 
>>>>>>>> Preparing... 
>>>>>>>> ########################################### [100%] 
>>>>>>>>
>>>>>>>> Processing: kernel-2.6.27.8-lpc32xx 
>>>>>>>> ===================================== 
>>>>>>>> Build path taken because: directory build, build key set, no 
>>>>>>>> prebuilt rpm, scbuild/scdeploy already unpacked package 
>>>>>>>>
>>>>>>>> Processing: kernel-2.6.27.8-lpc32xx 
>>>>>>>> ===================================== 
>>>>>>>> Build path taken because: directory build, build key set, no 
>>>>>>>> prebuilt rpm, rpmbuild --dbpath 
>>>>>>>> /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define 
>>>>>>>> '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' 
>>>>>>>> --define '__strip strip' --define '_topdir 
>>>>>>>> /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define 
>>>>>>>> '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir 
>>>>>>>> /home/enrico/ltib/EA3250/rpm/RPMS'  --define '_mandir 
>>>>>>>> /usr/share/man' --define '_sysconfdir /etc' --define 
>>>>>>>> '_localstatedir /var' -bc --short-circuit 
>>>>>>>> /home/enrico/ltib/EA3250/tmp/kernel-2.6.27.8-lpc32xx.spec 
>>>>>>>> Building target platforms: arm 
>>>>>>>> Building for target arm 
>>>>>>>> Executing(%build): /bin/sh -e 
>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652 
>>>>>>>> + umask 022 
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD 
>>>>>>>> + cd linux-2.6.27.8 
>>>>>>>> + eval echo 
>>>>>>>> + echo 
>>>>>>>> + PKG_KERNEL_PATH_PRECONFIG= 
>>>>>>>> + eval echo 
>>>>>>>> + echo 
>>>>>>>> + PKG_KERNEL_KBUILD_PRECONFIG= 
>>>>>>>> + eval echo linux-2.6.27.8-ea3250.config 
>>>>>>>> + echo linux-2.6.27.8-ea3250.config 
>>>>>>>> + PKG_KERNEL_PRECONFIG=linux-2.6.27.8-ea3250.config 
>>>>>>>> + KSRC_DIR=/home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8 
>>>>>>>> + : arm 
>>>>>>>> + : ccache /usr/bin/gcc -B/usr/bin// 
>>>>>>>> + : linux-2.6.27.8-ea3250.config 
>>>>>>>> + : /home/enrico/ltib/EA3250/config/platform/ea3250 
>>>>>>>> + : /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8 
>>>>>>>> + rm -f /home/enrico/ltib/EA3250/rpm/BUILD/linux 
>>>>>>>> + ln -s /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8 
>>>>>>>> /home/enrico/ltib/EA3250/rpm/BUILD/linux 
>>>>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8 
>>>>>>>> + KBOUT= 
>>>>>>>> + [ -n  -a  != . ] 
>>>>>>>> + KBOUT=. 
>>>>>>>> + KTARG=zImage 
>>>>>>>> + SYSCFG_KTARG=uImage 
>>>>>>>> + [ linux-2.6.27.8-ea3250.config = defconfig ] 
>>>>>>>> + [ -f 
>>>>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config.dev
>>>>>  
>>>>>>>> ] 
>>>>>>>> + [ -f 
>>>>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>>>>>  
>>>>>>>> ] 
>>>>>>>> + 
>>>>> CFG_PATH=/home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>>>>>  
>>>>>>>> + break 
>>>>>>>> + [ -z 
>>>>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>>>>>  
>>>>>>>> ] 
>>>>>>>> + [ arm = ppc -a -f arch/powerpc/Kconfig ] 
>>>>>>>> + [ -n  ] 
>>>>>>>> + [ -n 
>>>>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>>>>>  
>>>>>>>> ] 
>>>>>>>> + cp -f 
>>>>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>>>>>  
>>>>>>>> ./.config 
>>>>>>>> + [ -z  -a -n  -o -n  ] 
>>>>>>>> + [ -n 
>>>>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>>>>>  
>>>>>>>> ] 
>>>>>>>> + make ARCH=arm HOSTCC=ccache /usr/bin/gcc -B/usr/bin// oldconfig 
>>>>>>>> + yes make: *** No rule to make target `oldconfig'.  Stop. 
>>>>>>>> error: Bad exit status from 
>>>>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652 (%build) 
>>>>>>>>
>>>>>>>>
>>>>>>>> RPM build errors: 
>>>>>>>>     Bad exit status from /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652 
>>>>>>> (%build) 
>>>>>>>> Build time for kernel-2.6.27.8-lpc32xx: 0 seconds 
>>>>>>>>
>>>>>>>> Failed building kernel-2.6.27.8-lpc32xx 
>>>>>>>>
>>>>>>>>
>>>>>>>> f_buildrpms() returned an error, exiting 
>>>>>>>> traceback: 
>>>>>>>>  main:561 
>>>>>>>>
>>>>>>>>
>>>>>>>> Started: Fri Dec 10 15:07:17 2010 
>>>>>>>> Ended:   Fri Dec 10 15:07:36 2010 
>>>>>>>> Elapsed: 19 seconds 
>>>>>>>>
>>>>>>>> These packages failed to build: 
>>>>>>>> kernel-2.6.27.8-lpc32xx Build Failed 
>>>>>>>>
>>>>>>>> Exiting on error or interrupt 
>>>>>>>> address@hidden:~/ltib/EA3250$ 
>>>>>>>>> ----- Messaggio originale ----- Da: "Stuart Hughes‎" <address@hidden> 
>>>>>>>>> A: "Enrico Miglino‎" <address@hidden> 
>>>>>>>>> cc: address@hidden 
>>>>>>>>> Oggetto: Re: [Ltib] RPB Build error fotr packages related to X11 
>>>>>>>>> Data: Fri, 10 Dec 2010 12:47:01 +0000 
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Hi Enrico, 
>>>>>>>>>
>>>>>>>>> If base_libs fails then any dependent fail. 
>>>>>>>>>
>>>>>>>>> Despite advice from others, unless you're running an autobuilder, 
>>>>>>> don't 
>>>>>>>>> use --continue. 
>>>>>>>>>
>>>>>>>>> Please past the output of the base_libs failure. 
>>>>>>>>>
>>>>>>>>> Also, check that the toolchain you're using is actually installed: 
>>>>>>>>> $ ./ltib -m shell 
>>>>>>>>> LTIB> gcc -v 
>>>>>>>>>
>>>>>>>>> Regards, Stuart 
>>>>>>>>>
>>>>>>>>> Enrico Miglino wrote: 
>>>>>>>>>> Hi, 
>>>>>>>>>>
>>>>>>>>>> after a compete build for EA3250 platform I tried to add in 
>>>>>>>>>> configuration (with ./ltib -m config) X11 server and the 
>>>>>>>>>> essential X11  modules, obating as a result that the build 
>>>>>>>>>> process hangs with messages  like this (tried to change some 
>>>>>>>>>> configuration parameters but the  problemis even the same): 
>>>>>>>>>>
>>>>>>>>>> START 
>>>>>>>>>>
>>>>> ===================================================================sudo 
>>>>>>>>>> /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs 
>>>>>>>>>> --dbpath  /var/lib/rpm --prefix / --ignorearch -ivh --force 
>>>>>>>>>> --excludedocs  --noscripts --define '_tmppath /tmp/ltib' 
>>>>>>>>>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/modeps-1.0-1.arm.rpm 
>>>>>>>>>> error: failed to stat /home/enrico/.gvfs: Permission denied 
>>>>>>>>>> Preparing... 
>>>>>>>>>> ########################################### [100%] 
>>>>>>>>>> 1:modeps                 ########################################### 
>>>>>>> [100%] 
>>>>>>>>>> f_buildrpms() returned an error, exiting 
>>>>>>>>>> traceback: 
>>>>>>>>>> main:561 
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Started: Wed Dec  8 23:00:47 2010 
>>>>>>>>>> Ended:   Wed Dec  8 23:10:20 2010 
>>>>>>>>>> Elapsed: 573 seconds 
>>>>>>>>>>
>>>>>>>>>> These packages failed to build: 
>>>>>>>>>> base_libs libXt libXmu 
>>>>>>>>>> ================================================================== 
>>>>>>>>>> END 
>>>>>>>>>>
>>>>>>>>>> Note that I'm workin on ubuntu 10.04 32 bit and I already set 
>>>>>>>>>> /opt with a 777 permissions. 
>>>>>>>>>>
>>>>>>>>>> Thanks. Enrico 
>>>>>>>>>>
>>>>>>>>>> -------------------------------------------------------------- 
>>>>>>>>>> Ovi Mail: Making email access easy 
>>>>>>>>>> http://mail.ovi.com 
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________ 
>>>>>>>>>> LTIB home page: http://ltib.org 
>>>>>>>>>>
>>>>>>>>>> Ltib mailing list 
>>>>>>>>>> address@hidden 
>>>>>>>>>> http://lists.nongnu.org/mailman/listinfo/ltib 
>>>>>>>>>>
>>>>>>>> -------------------------------------------------------------- 
>>>>>>>> Ovi Mail: Making email access easy 
>>>>>>>> http://mail.ovi.com 
>>>>>>>>
>>>>>>>>
>>>>>> -------------------------------------------------------------- 
>>>>>> Ovi Mail: Making email access easy 
>>>>>> http://mail.ovi.com 
>>>>>>
>>>>>>
>>>> -------------------------------------------------------------- 
>>>> Ovi Mail: Making email access easy 
>>>> http://mail.ovi.com 
>>>>
>>>>
>>>> _______________________________________________ 
>>>> LTIB home page: http://ltib.org 
>>>>
>>>> Ltib mailing list 
>>>> address@hidden 
>>>> http://lists.nongnu.org/mailman/listinfo/ltib 
>>>>
>>> -------------------------------------------------------------- 
>>> Ovi Mail: Making email access easy 
>>> http://mail.ovi.com 
>>>
>>>
>> << ltib-x11-selected.png >> 
>>
> 
> --------------------------------------------------------------
> Ovi Mail: Making email access easy
> http://mail.ovi.com
> 
>