[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[lwip-users] Re: [lwip] SLIP support in Windows
From: |
Fabio Fumi |
Subject: |
[lwip-users] Re: [lwip] SLIP support in Windows |
Date: |
Wed, 08 Jan 2003 22:58:07 -0000 |
Hi,
I solved my problem. I was just looking at a wrong
log printout of the COM port data. I fixed it, added
the correct modem answers, and finally I could get the
SLIP connection on. Now I will build a minimal
application on top of the IP stack...
bye
Fabio
--- James Roth <address@hidden> ha scritto:
> Fabio Fumi wrote:
>
> >My problem is that even before the first AT
> command, a
> >string of some repeated characters (something like
> >'±±±±±±±ááááááá...') is sent to the modem, as a
> >start-up handshake procedure, I guess. If the modem
> >dosen't answer to that, the connection is stopped
> with
> >a message like 'modem not responding'. What should
> be
> >the answer to that string? A simple \r is enough?
> Did
> >you have such a problem? Thanks.
> > bye
> > Fabio
> >
> I don't reply to such a string. What is your
> windows setup? Mine:
>
> 33.6 modem, com port at 115200 baud, no flow
> control
> SLIP with 1500 MTU
> no authentication
>
> >
> > --- James Roth <address@hidden> ha
> scritto: >
> >
> >> I just humor windows with an OK\r reply to
> most
> >>commands. Windows
> >>sends the AT... command followed by a \r. The
> ATDT
> >>command or the
> >>CLIENT string (with no \r) cause me to go into
> SLIP
> >>mode. I also put
> >>delays in the AT code for realism.
> >>
> >>while (1)
> >>{
> >> if (got ATDT...)
> >> {
> >> write ("CONNECT\r")
> >> break;
> >> }
> >> else if (got AT...) /* an AT other than ATDT
> */
> >> {
> >> write ("OK\r")
> >> }
> >> else if (got CLIENT)
> >> {
> >> write ("CLIENTSERVER")
> >> break;
> >> }
> >>}
> >>
> >>do_slip()
> >>
> >>Good luck!
> >>
>
> --
> James Roth
> Shugyo Design Technologies
> http://www.shugyodesign.com/
>
>
>
> [This message was sent through the lwip discussion
list.]
______________________________________________________________________
Iscriviti al Club Nokia, è gratis!
http://it.yahoo.com/mail_it/foot/?http://www.club.nokia.it/
[This message was sent through the lwip discussion list.]
- [lwip-users] Re: [lwip] SLIP support in Windows, Adam Dunkels, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Conny Öhult, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, James Roth, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Conny Öhult, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows,
Fabio Fumi <=
- [lwip-users] Re: [lwip] SLIP support in Windows, Conny Öhult, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Conny Öhult, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Fabio Fumi, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Fabio Fumi, 2003/01/08
- [lwip-users] Re: [lwip] SLIP support in Windows, Fabio Fumi, 2003/01/09
- [lwip-users] Re: [lwip] SLIP support in Windows, Fabio Fumi, 2003/01/09
- [lwip-users] Re: [lwip] SLIP support in Windows, James Roth, 2003/01/09
- [lwip-users] Re: [lwip] SLIP support in Windows, Phil Dempster, 2003/01/09
- [lwip-users] Re: [lwip] SLIP support in Windows, Conny Öhult, 2003/01/09
- [lwip-users] Re: [lwip] SLIP support in Windows, James Roth, 2003/01/09