[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] osd i/f idea (Mike)

From: Michele Santucci
Subject: Re: [Paparazzi-devel] osd i/f idea (Mike)
Date: Fri, 4 Sep 2009 21:59:50 +0200


sorry but I've been a little hasty in my conclusion in the previous email.
Anyway I got what you were meaning and well yes this's not a really optimized
way to solve that but of course it can 'pay the bill' so to say.
If your OSD already 'understood' a NMEA GPS input you can retrieve telemetry
data output but of course you can also go straight to the source and get the actual
GPS output  feeding the Paparazzi board (as long as you are using a NMEA
standard GPS) thus cutting out the need of a real microntroller (of course if the paparazzi board is using other gps input format like ublox binary one well you
still need a micro).

Best Regards,
From: "chris" <address@hidden>
Sent: Friday, September 04, 2009 8:29 PM
To: <address@hidden>
Subject: [Paparazzi-devel] osd i/f idea (Mike)

Hi Mike
No i mean airborne.
What i was thinking is that since my osd (also has pitot, air pressure
sensors rpm sensors, fuel sensors etc. ) has a GPS input for displaying
gps data, i can use a microcontroller that will listen
to the airborne serial modem  (much like the Uart tunnel firmware) and
present the data to the osd simulating a gps.
You see any problem in this approach?
I am asking because if there is a problem in my way of thinking i don't
want to
waste any time on this as it is only an idea i have and i haven't
actually started working on it

Paparazzi-devel mailing list

Nessun virus nel messaggio in arrivo.
Controllato da AVG -
Versione: 8.5.409 / Database dei virus: 270.13.76/2345 - Data di rilascio: 09/04/09 05:51:00

reply via email to

[Prev in Thread] Current Thread [Next in Thread]