[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] BAROMETER ELECTION

From: Rafael Espino Gómez
Subject: Re: [Paparazzi-devel] BAROMETER ELECTION
Date: Thu, 21 Jul 2011 00:26:52 +0200

Hi Martin,

Thank you very much. I`ve chosen the BMP085. The MS5611 seems really very good with its two interfaces. Perhaps I'll try it later too.


Rafa Espino.

2011/7/20 Martin Mueller <address@hidden>
Hi Rafael,

both the BMP085 and the MS5534A are supported:

The BMP085 gives a pretty noisy signal and the MS5534A is fairly old (a clock signal is generated by the TWOG at P0.7, see source code).

Take a look at the MS5611 that seems to outperform all other integrated pressure sensors.


On 18.07.2011 11:35, Rafael Espino Gómez wrote:
Hi all,

I'm designing a shield to integrate several sensors for my autopilot
(TWOG firm mounted in my own design). I have a doubt about the Barometer

- SCP1000 is obsolete and the sparkfun store recommend me the BMP085 as
replacement part. Is it possible to use is? Is the driver module
compatible for it ?
- MS5534A with SPI connection. I have a doubt with it: It has the
connections of SPI: SCLK, MISO, MOSI. But it has another one, MCLK. I'm
not sure where to connect it. Do I need a external crystal or oscilator?


Rafa Espino.


//address@hidden <mailto:address@hidden>
//address@hidden <mailto:address@hidden> <>


Paparazzi-devel mailing list

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]