Hello,
another solution ?
Did someone have the same problem too ?
Thanks
Emmanuel
On Tue, Nov 30, 2004 at 12:59:44PM -0500, Julien Chavanton wrote:
I did have the same problem, set one more voice board in bayonne.conf
; number of potential voice resource cards in system
voice = 17
Julien
-----Original Message-----
From: address@hidden
[mailto:address@hidden
g] On Behalf Of address@hidden
Sent: November 30, 2004 12:35 PM
To: address@hidden
Cc: address@hidden
Subject: [Bayonne-devel] driver started 59 ports instead of 60
Hi,
bayonne 1.2.13 on Red Hat 7.3 (compiled very fine, great !)
hardware : Dialogic D/600JCT-2E1 - Drivers : 5.1 SP1
something disturb me :)
With E1 : 30 ports are detected
With 2 E1 : 59 ports are detected ?
Where is the last one ? ;)
---
bayonne on --test mode :
----
SERVER VERSION 1.2.13; i686 Linux 2.4.18-3
TGI VERSION 2.2; driver=dialogic; prefix=//apps/bayonne; etc=/etc/
Loading TGI plugins...
tgi: perl interpreter loaded
tgi: initialized; uid=99 pid=4007
tgi: buffer=/var/run/bayonne/bayonne.ctrl; cfd=8; time=10
Loading DSO plugin images...
debug: trace module loaded
dialogic: setting polled mode
dialogic: vox card 1 of 60; ports=4
dialogic: pri card 1; timeslots =30
dialogic: vox card 2 of 60; ports=4
dialogic: vox card 3 of 60; ports=4
dialogic: vox card 4 of 60; ports=4
dialogic: vox card 5 of 60; ports=4
dialogic: vox card 6 of 60; ports=4
dialogic: vox card 7 of 60; ports=4
dialogic: vox card 8 of 60; ports=2
dialogic: vox card 9 of 60; ports=4
dialogic: vox card 10 of 60; ports=4
dialogic: pri card 2; timeslots =30
dialogic: vox card 11 of 60; ports=4
dialogic: vox card 12 of 60; ports=4
dialogic: vox card 13 of 60; ports=4
dialogic: vox card 14 of 60; ports=4
dialogic: vox card 15 of 60; ports=4
dialogic: vox card 16 of 60; ports=2
^ total = 60 ports ...but...
Dialogic driver loaded; capacity=59; maxconference=0
^ CAPACITY=59 why ???
[...]
allocating trunks...
dx(30): lsi No error
dx(30): hook Command not supported
dx(31): lsi No error
dx(31): hook Command not supported
dx(32): lsi No error
dx(32): hook Command not supported
^ what are theses logs on only dx(30/31/32) ??
starting trunks.....
driver starting...
driver started 59 port(s)
^ 59 ports ;(
-------
My dialogic.cfg
###################################
# #
# DIALOGIC CONFIGURATION FILE #
# #
###################################
[Genload - All Boards]
LogFile=genload.log
BusType=SCBus
SCBusClockMaster=AUTOMATIC
SCBusClockMasterSource=AUTOMATIC
PCMEncoding=ALAW
[Genload - PCI ID 1] /* Dual T1/E1 PCI HD */
ParameterFile=ctr4.prm
ISDNProtocol=CTR4
ParameterFile2=ctr4.prm
ISDNProtocol2=CTR4
^ some errors ?
--
--
_______________________________________________
Bayonne-devel mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/bayonne-devel