Re: [Bayonne-devel] driver started 59 ports instead of 60

[ef]

Hello,

another solution ?

Did someone have the same problem too ?

Thanks 

Emmanuel



On Tue, Nov 30, 2004 at 12:59:44PM -0500, Julien Chavanton wrote:
> I did have the same problem, set one more voice board in bayonne.conf
> 
> ; number of potential voice resource cards in system
> voice = 17
> 
> Julien
> 
> 
> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden
> g] On Behalf Of address@hidden
> Sent: November 30, 2004 12:35 PM
> To: address@hidden
> Cc: address@hidden
> Subject: [Bayonne-devel] driver started 59 ports instead of 60
> 
> 
> Hi,
> 
> bayonne 1.2.13 on Red Hat 7.3 (compiled very fine,  great !)
> hardware : Dialogic D/600JCT-2E1  - Drivers : 5.1  SP1
> 
> 
> something disturb me :)
> 
> 
> With E1 :  30 ports are detected
> 
> With 2 E1 : 59 ports are detected ?
> 
> Where is the last one ? ;)
> 
> ---
> 
> bayonne on --test mode :
> 
> ----
> 
> SERVER VERSION 1.2.13; i686 Linux 2.4.18-3
> TGI VERSION 2.2; driver=dialogic; prefix=//apps/bayonne; etc=/etc/
> Loading TGI plugins...
> tgi: perl interpreter loaded
> tgi: initialized; uid=99 pid=4007
> tgi: buffer=/var/run/bayonne/bayonne.ctrl; cfd=8; time=10
> Loading DSO plugin images...
> debug: trace module loaded
> dialogic: setting polled mode
> dialogic: vox card 1 of 60; ports=4
> dialogic: pri card 1; timeslots =30
> dialogic: vox card 2 of 60; ports=4
> dialogic: vox card 3 of 60; ports=4
> dialogic: vox card 4 of 60; ports=4
> dialogic: vox card 5 of 60; ports=4
> dialogic: vox card 6 of 60; ports=4
> dialogic: vox card 7 of 60; ports=4
> dialogic: vox card 8 of 60; ports=2
> dialogic: vox card 9 of 60; ports=4
> dialogic: vox card 10 of 60; ports=4
> dialogic: pri card 2; timeslots =30
> dialogic: vox card 11 of 60; ports=4
> dialogic: vox card 12 of 60; ports=4
> dialogic: vox card 13 of 60; ports=4
> dialogic: vox card 14 of 60; ports=4
> dialogic: vox card 15 of 60; ports=4
> dialogic: vox card 16 of 60; ports=2
> 
> ^  total = 60 ports ...but...
> 
> Dialogic driver loaded; capacity=59; maxconference=0
> 
> 
> ^  CAPACITY=59   why ???
> 
> 
> 
> [...]
> 
> allocating trunks...
> dx(30): lsi No error
> dx(30): hook Command not supported
> dx(31): lsi No error
> dx(31): hook Command not supported
> dx(32): lsi No error
> dx(32): hook Command not supported
> 
> ^  what are theses logs on only dx(30/31/32) ??
> 
> 
> starting trunks.....
> driver starting...
> driver started 59 port(s)
> 
> ^ 59 ports ;(
> 
> -------
> 
> My dialogic.cfg
> 
> 
>                 ###################################
>                 #                                 #
>                 #   DIALOGIC CONFIGURATION FILE   #
>                 #                                 #
>                 ###################################
> 
> 
> 
> 
> [Genload - All Boards]
> LogFile=genload.log
> BusType=SCBus
> SCBusClockMaster=AUTOMATIC
> SCBusClockMasterSource=AUTOMATIC
> PCMEncoding=ALAW
> 
> [Genload - PCI ID 1] /* Dual T1/E1 PCI HD */
> ParameterFile=ctr4.prm
> ISDNProtocol=CTR4
> ParameterFile2=ctr4.prm
> ISDNProtocol2=CTR4
> 
> 
> ^  some errors ?
> 
> 
> --
> 
> 
> 
> 
> 
> -- 
> 
> 
> _______________________________________________
> Bayonne-devel mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/bayonne-devel

--