Re: [Bayonne-devel] driver started 59 ports instead of 60

[Etoile Dièse]

Hello,

We have this problem and we found the bug. Moreover you should notice that the 
lines 30, 31, 32, 33 are considered as been analogs and don't work.
The issue is to replace the line 376 of drivers/dialogic/driver.cpp :

if(dti > dticount+1)

by :

if(dti > dticount)

and it rocks.
This line number corresponds to the version 1.2.11 but I think the problem is 
similar in others versions.

Cheers

Le vendredi 3 Décembre 2004 09:42, Michel Stam a écrit :
>  Hello Emmanuel,
>
>  Yes I had similar problems with the dialogic driver. I switched to the
> 'globalcall' driver and this worked fine for me.
>
>  Cheers,
>
>  Michel
>
>  address@hidden wrote:
> Hello,
>
> another solution ?
>
> Did someone have the same problem too ?
>
> Thanks
>
> Emmanuel
>
>
>
> On Tue, Nov 30, 2004 at 12:59:44PM -0500, Julien Chavanton wrote:
>
>
> I did have the same problem, set one more voice board in bayonne.conf
>
> ; number of potential voice resource cards in system
> voice = 17
>
> Julien
>
>
> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden
> g] On Behalf Of address@hidden
> Sent: November 30, 2004 12:35 PM
> To: address@hidden
> Cc: address@hidden
> Subject: [Bayonne-devel] driver started 59 ports instead of 60
>
>
> Hi,
>
> bayonne 1.2.13 on Red Hat 7.3 (compiled very fine,  great !)
> hardware : Dialogic D/600JCT-2E1  - Drivers : 5.1  SP1
>
>
> something disturb me :)
>
>
> With E1 :  30 ports are detected
>
> With 2 E1 : 59 ports are detected ?
>
> Where is the last one ? ;)
>
> ---
>
> bayonne on --test mode :
>
> ----
>
> SERVER VERSION 1.2.13; i686 Linux 2.4.18-3
> TGI VERSION 2.2; driver=dialogic; prefix=//apps/bayonne; etc=/etc/
> Loading TGI plugins...
> tgi: perl interpreter loaded
> tgi: initialized; uid=99 pid=4007
> tgi: buffer=/var/run/bayonne/bayonne.ctrl; cfd=8; time=10
> Loading DSO plugin images...
> debug: trace module loaded
> dialogic: setting polled mode
> dialogic: vox card 1 of 60; ports=4
> dialogic: pri card 1; timeslots =30
> dialogic: vox card 2 of 60; ports=4
> dialogic: vox card 3 of 60; ports=4
> dialogic: vox card 4 of 60; ports=4
> dialogic: vox card 5 of 60; ports=4
> dialogic: vox card 6 of 60; ports=4
> dialogic: vox card 7 of 60; ports=4
> dialogic: vox card 8 of 60; ports=2
> dialogic: vox card 9 of 60; ports=4
> dialogic: vox card 10 of 60; ports=4
> dialogic: pri card 2; timeslots =30
> dialogic: vox card 11 of 60; ports=4
> dialogic: vox card 12 of 60; ports=4
> dialogic: vox card 13 of 60; ports=4
> dialogic: vox card 14 of 60; ports=4
> dialogic: vox card 15 of 60; ports=4
> dialogic: vox card 16 of 60; ports=2
>
> ^  total = 60 ports ...but...
>
> Dialogic driver loaded; capacity=59; maxconference=0
>
>
> ^  CAPACITY=59   why ???
>
>
>
> [...]
>
> allocating trunks...
> dx(30): lsi No error
> dx(30): hook Command not supported
> dx(31): lsi No error
> dx(31): hook Command not supported
> dx(32): lsi No error
> dx(32): hook Command not supported
>
> ^  what are theses logs on only dx(30/31/32) ??
>
>
> starting trunks.....
> driver starting...
> driver started 59 port(s)
>
> ^ 59 ports ;(
>
> -------
>
> My dialogic.cfg
>
>
>                 ###################################
>                 #                                 #
>                 #   DIALOGIC CONFIGURATION FILE   #
>                 #                                 #
>                 ###################################
>
>
>
>
> [Genload - All Boards]
> LogFile=genload.log
> BusType=SCBus
> SCBusClockMaster=AUTOMATIC
> SCBusClockMasterSource=AUTOMATIC
> PCMEncoding=ALAW
>
> [Genload - PCI ID 1] /* Dual T1/E1 PCI HD */
> ParameterFile=ctr4.prm
> ISDNProtocol=CTR4
> ParameterFile2=ctr4.prm
> ISDNProtocol2=CTR4
>
>
> ^  some errors ?
>
>
> --
>
>
>
>
>
> --
>
>
> _______________________________________________
> Bayonne-devel mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/bayonne-devel

-- 
Etoile Dièse