[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Bayonne-devel] driver started 59 ports instead of 60
From: |
ef |
Subject: |
Re: [Bayonne-devel] driver started 59 ports instead of 60 |
Date: |
Thu, 9 Dec 2004 11:35:02 +0100 |
User-agent: |
Mutt/1.4.1i |
Perfect !
Dialogic driver loaded; capacity=60; maxconference=0
and now, no error on dx(30),31 and 32 !
Thanks a lot Etoile-Diese, (Etoile from Einstel?)
David, could you change it on 1.2.14 ? Line 388
bayonne-1.2.13/drivers/dialogic/driver.cpp
It seems that we are several to have this error (E1).
Best Regards,
Emmanuel
On Wed, Dec 08, 2004 at 08:55:44PM +0100, Etoile Dièse wrote:
> Hello,
>
> We have this problem and we found the bug. Moreover you should notice that
> the
> lines 30, 31, 32, 33 are considered as been analogs and don't work.
> The issue is to replace the line 376 of drivers/dialogic/driver.cpp :
>
> if(dti > dticount+1)
>
> by :
>
> if(dti > dticount)
>
> and it rocks.
> This line number corresponds to the version 1.2.11 but I think the problem is
> similar in others versions.
>
> Cheers
>
> Le vendredi 3 Décembre 2004 09:42, Michel Stam a écrit :
> > Hello Emmanuel,
> >
> > Yes I had similar problems with the dialogic driver. I switched to the
> > 'globalcall' driver and this worked fine for me.
> >
> > Cheers,
> >
> > Michel
> >
> > address@hidden wrote:
> > Hello,
> >
> > another solution ?
> >
> > Did someone have the same problem too ?
> >
> > Thanks
> >
> > Emmanuel
> >
> >
> >
> > On Tue, Nov 30, 2004 at 12:59:44PM -0500, Julien Chavanton wrote:
> >
> >
> > I did have the same problem, set one more voice board in bayonne.conf
> >
> > ; number of potential voice resource cards in system
> > voice = 17
> >
> > Julien
> >
> >
> > -----Original Message-----
> > From: address@hidden
> > [mailto:address@hidden
> > g] On Behalf Of address@hidden
> > Sent: November 30, 2004 12:35 PM
> > To: address@hidden
> > Cc: address@hidden
> > Subject: [Bayonne-devel] driver started 59 ports instead of 60
> >
> >
> > Hi,
> >
> > bayonne 1.2.13 on Red Hat 7.3 (compiled very fine, great !)
> > hardware : Dialogic D/600JCT-2E1 - Drivers : 5.1 SP1
> >
> >
> > something disturb me :)
> >
> >
> > With E1 : 30 ports are detected
> >
> > With 2 E1 : 59 ports are detected ?
> >
> > Where is the last one ? ;)
> >
> > ---
> >
> > bayonne on --test mode :
> >
> > ----
> >
> > SERVER VERSION 1.2.13; i686 Linux 2.4.18-3
> > TGI VERSION 2.2; driver=dialogic; prefix=//apps/bayonne; etc=/etc/
> > Loading TGI plugins...
> > tgi: perl interpreter loaded
> > tgi: initialized; uid=99 pid=4007
> > tgi: buffer=/var/run/bayonne/bayonne.ctrl; cfd=8; time=10
> > Loading DSO plugin images...
> > debug: trace module loaded
> > dialogic: setting polled mode
> > dialogic: vox card 1 of 60; ports=4
> > dialogic: pri card 1; timeslots =30
> > dialogic: vox card 2 of 60; ports=4
> > dialogic: vox card 3 of 60; ports=4
> > dialogic: vox card 4 of 60; ports=4
> > dialogic: vox card 5 of 60; ports=4
> > dialogic: vox card 6 of 60; ports=4
> > dialogic: vox card 7 of 60; ports=4
> > dialogic: vox card 8 of 60; ports=2
> > dialogic: vox card 9 of 60; ports=4
> > dialogic: vox card 10 of 60; ports=4
> > dialogic: pri card 2; timeslots =30
> > dialogic: vox card 11 of 60; ports=4
> > dialogic: vox card 12 of 60; ports=4
> > dialogic: vox card 13 of 60; ports=4
> > dialogic: vox card 14 of 60; ports=4
> > dialogic: vox card 15 of 60; ports=4
> > dialogic: vox card 16 of 60; ports=2
> >
> > ^ total = 60 ports ...but...
> >
> > Dialogic driver loaded; capacity=59; maxconference=0
> >
> >
> > ^ CAPACITY=59 why ???
> >
> >
> >
> > [...]
> >
> > allocating trunks...
> > dx(30): lsi No error
> > dx(30): hook Command not supported
> > dx(31): lsi No error
> > dx(31): hook Command not supported
> > dx(32): lsi No error
> > dx(32): hook Command not supported
> >
> > ^ what are theses logs on only dx(30/31/32) ??
> >
> >
> > starting trunks.....
> > driver starting...
> > driver started 59 port(s)
> >
> > ^ 59 ports ;(
> >
> > -------
> >
> > My dialogic.cfg
> >
> >
> > ###################################
> > # #
> > # DIALOGIC CONFIGURATION FILE #
> > # #
> > ###################################
> >
> >
> >
> >
> > [Genload - All Boards]
> > LogFile=genload.log
> > BusType=SCBus
> > SCBusClockMaster=AUTOMATIC
> > SCBusClockMasterSource=AUTOMATIC
> > PCMEncoding=ALAW
> >
> > [Genload - PCI ID 1] /* Dual T1/E1 PCI HD */
> > ParameterFile=ctr4.prm
> > ISDNProtocol=CTR4
> > ParameterFile2=ctr4.prm
> > ISDNProtocol2=CTR4
> >
> >
> > ^ some errors ?
> >
> >
> > --
> >
> >
> >
> >
> >
> > --
> >
> >
> > _______________________________________________
> > Bayonne-devel mailing list
> > address@hidden
> > http://lists.gnu.org/mailman/listinfo/bayonne-devel
>
> --
> Etoile Dièse
>
>
> _______________________________________________
> Bayonne-devel mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/bayonne-devel
--