[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] a report on dqpsk modulation in gnuradio
From: |
Johnathan Corgan |
Subject: |
Re: [Discuss-gnuradio] a report on dqpsk modulation in gnuradio |
Date: |
Wed, 3 Dec 2008 11:57:55 -0800 |
On Mon, Dec 1, 2008 at 1:07 PM, Bill Stevenson
<address@hidden> wrote:
> python benchmark_tx.py -f 2479M -r 2000k -m dqpsk -s 100 (-s 800 or -s 1500)
> python benchmark_rx.py -f 2479M -r 2000k -m dqpsk
What is the CPU type and speed you are using? In my experience, data
rates above about 500 kbps are difficult to receive on a typical
laptop platform due to lack of sufficient CPU cycles. On an Intel
Core2 Duo at 2.1 GHz (IBM Thinkpad T60), I can't go above 800 kbps.
Your rate of 2 Mbps is likely much too high. Are you seeing any "uO"
on your output?
-Johnathan
- Re: [Discuss-gnuradio] a report on dqpsk modulation in gnuradio, Bill Stevenson, 2008/12/01
- Re: [Discuss-gnuradio] a report on dqpsk modulation in gnuradio,
Johnathan Corgan <=
- Re: [Discuss-gnuradio] a report on dqpsk modulation in gnuradio, Bill Stevenson, 2008/12/04
- Re: [Discuss-gnuradio] a report on dqpsk modulation in gnuradio, Johnathan Corgan, 2008/12/04
- Re: [Discuss-gnuradio] a report on dqpsk modulation in gnuradio, Bill Stevenson, 2008/12/04
- Re: [Discuss-gnuradio] a report on dqpsk modulation in gnuradio, Bill Stevenson, 2008/12/06
- Re: [Discuss-gnuradio] a report on dqpsk modulation in gnuradio, Johnathan Corgan, 2008/12/07
- Re: [Discuss-gnuradio] a report on dqpsk modulation in gnuradio, Stefan BrĂ¼ns, 2008/12/09