Re: [Discuss-gnuradio] gr-pager build issue

[Josh Blum]

Im not sure what this has to do with gr pager...

Did you follow the build guide? Your PYTHONPATH is probably not set. See 
http://gnuradio.org/redmine/wiki/gnuradio/ReportingErrors

-Josh

On 01/16/2010 02:19 PM, sandeep mishra wrote:
> Hi,
> I have installed GNU radio in ubantu9.1 (karmic), but while i am running any
> python program i use to get error "import error no gnuradio module" i
> searched over internet but there is no fruitful result, I performed every
> step as per mentioned over website on gnuradio ubantu installation, while
> when I checked my computer I found that python2.6/ site-packages is not
> having gnuradio module but when i typed python on command line it is showing
> that python and its property. I am unable to configure or give address to
> python of gnuradio module, every installation is in default manner. Kindly
> help me to get out of this problem.
>
> On Sat, Jan 16, 2010 at 7:14 AM, Veljko Pejovic<address@hidden>  wrote:
>
> > Hi,
> >
> > I got the same error:
> >
> > make[4]: *** No rule to make target `/../lib/libgnuradio-pager.la',
> > needed by `_pager_swig.la'.  Stop.
> > make[4]: Leaving directory
> > `/home/moment/Documents/gnuradio-veljkop/trunk/gnuradio/gr-pager/swig'
> > make[3]: *** [all] Error 2
> > make[3]: Leaving directory
> > `/home/moment/Documents/gnuradio-veljkop/trunk/gnuradio/gr-pager/swig'
> > make[2]: *** [all-recursive] Error 1
> > make[2]: Leaving directory
> > `/home/moment/Documents/gnuradio-veljkop/trunk/gnuradio/gr-pager'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory
> > `/home/moment/Documents/gnuradio-veljkop/trunk/gnuradio'
> > make: *** [all] Error 2
> >
> > on Ubuntu 9.10 when trying to build the most recent gnuradio source
> > code. The latest release (3.2.2) builds fine.
> >
> > Did anyone find out what is the source of this error is?
> >
> > Cheers,
> >
> >
> > Veljko
> >
> > 2009/12/21 Ben Hilburn<address@hidden>:
> > > Yup - I tried all of the 'dumb mistake' things I could think of.  Like
> > > I said, I couldn't reproduce the error on another system.  I'll dig
> > > through things once I find time and see if I can't get to the source
> > > of the issue.
> > >
> > > I just wanted to mention it in case it comes up again in the near
> > > future from another user.
> > >
> > > Cheers,
> > > Ben
> > >
> > > On Mon, Dec 21, 2009 at 10:19 PM, Tom Rondeau<address@hidden>
> > wrote:
> > > > Ben Hilburn wrote:
> > > > > Hey all -
> > > > >
> > > > > When building the most recent pull of the GNURadio tree on Ubuntu,
> > > > > gr-pager fails to build with the following error:
> > ------------------------------------------------------------------------------------------------------
> > > > > make[5]: *** No rule to make target `/../lib/libgnuradio-pager.la',
> > > > > needed by `_pager_swig.la'.  Stop.
> > > > > make[5]: Leaving directory
> > `/users/bhilburn/code/gnuradio.git/gnuradio-3.3git-575-g75429993/_build/gr-pager/swig'
> > > > > make[4]: *** [all] Error 2
> > > > > make[4]: Leaving directory
> > `/users/bhilburn/code/gnuradio.git/gnuradio-3.3git-575-g75429993/_build/gr-pager/swig'
> > > > > make[3]: *** [all-recursive] Error 1
> > > > > make[3]: Leaving directory
> > `/users/bhilburn/code/gnuradio.git/gnuradio-3.3git-575-g75429993/_build/gr-pager'
> > > > > make[2]: *** [all-recursive] Error 1
> > ------------------------------------------------------------------------------------------------------
> > > > > The Ubuntu system has swig 1.3 installed, and I get the same results
> > > > > when using 'make distcheck'.  However, I tested the build on another
> > > > > machine running Archlinux, and could not reproduce the problem.
> > > > >
> > > > > I'm not sure if it is a system configuration issue or a compatibility
> > > > > issue, but I wanted to give the list a heads-up in case it pops up
> > > > > again later.  I don't have time now, but I'll dig through it and
> > > > > locate the problem when I find some free time.
> > > > >
> > > > > Cheers,
> > > > > Ben
> > > >
> > > > This seems like a configure-time error. Did you try a make distclean
> > then a
> > > > bootstrap&&  configure to rebuild all of the Makefiles?
> > > >
> > > > Tom
> > >
> > >
> > > _______________________________________________
> > > Discuss-gnuradio mailing list
> > > address@hidden
> > > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio