GPSD does not see Galileo

[David Taylor]

Compiled cgps: 3.22.1~dev (revision release-3.22-46-gc36433084) and all 
seems to be running OK, with one exception - I can't get Galileo to 
work!  I'm using the same hardware and GPS/RTC device as before (a 
second set), and whilst I can use ubxtool to enable and disable GLONASS 
(for example), the same commands don't appear to work for GALILEO.  I'm 
puzzled because ubxtool seems to think it's enabled if I'm reading the 
output correctly:

UBX-CFG-GNSS:
 msgVer 0  numTrkChHw 32 numTrkChUse 32 numConfigBlocks 7
  gnssId 0 TrkCh  8 maxTrCh 16 reserved 0 Flags x01010001
   GPS L1C/A enabled
  gnssId 1 TrkCh  1 maxTrCh  3 reserved 0 Flags x01010001
   SBAS L1C/A enabled
  gnssId 2 TrkCh  4 maxTrCh  8 reserved 0 Flags x01010001
   Galileo E1 enabled
  gnssId 3 TrkCh  8 maxTrCh 16 reserved 0 Flags x01010000
   BeiDou B1I
  gnssId 4 TrkCh  0 maxTrCh  8 reserved 0 Flags x03010000
   IMES L1
  gnssId 5 TrkCh  0 maxTrCh  3 reserved 0 Flags x05010001
   QZSS L1C/A enabled
  gnssId 6 TrkCh  8 maxTrCh 14 reserved 0 Flags x01010001
   GLONASS L1 enabled

Full output attached.

I've left it running for many minutes, enough for a full almanac 
download.  The antenna is a standard one, working on GPS and GLONASS. 
I've used ubxtool reset, power resets.  What am I missing?

Thanks,
David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@blueyonder.co.uk
Twitter: @gm8arv

_temp.txt
Description: Text document