[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Ltib] Failure to build pkgconfig on LPC32xx Target
From: |
Stuart Hughes |
Subject: |
Re: [Ltib] Failure to build pkgconfig on LPC32xx Target |
Date: |
Tue, 27 Jul 2010 07:01:32 +0100 |
User-agent: |
Thunderbird 2.0.0.16 (X11/20080707) |
No, he enabled a new package.
Quentin YANG wrote:
> Hi Tim,
>
> Are you saying the latest LTIB release from CVS failed to build Linux
> image for Phytec 3250 board. (Phytec LPC32xx) ?
>
> In that case, I'll avoid updating my local LTIB installation.
>
> I've successfully built Linux image for Phytec 3250 board.
> ( previous kernel 2.6.27.8 and most recent kernel 2.6.34 both passed the
> LTIB build.
> I am using Fedora 9 with 2.6.27.25 kernel
> address@hidden ~]$ uname -r
> 2.6.27.25-78.2.56.fc9.i686
> )
>
> Let me know if you need any assistance.
> I can send u the kernel_pre_config and Phytec_Board_Make_config I used.
>
> Also, please make sure to run
> address@hidden ltib-qs]$./ltib -m distclean
> address@hidden ltib-qs]$./ltib --config
> if you want to do another build from scratch.
>
>
> Regards,
> Quentin
>
>
>
>
> On Tue, Jul 27, 2010 at 5:06 AM, Stuart Hughes <address@hidden
> <mailto:address@hidden>> wrote:
>
> Hi Tim,
>
> It's a bug in the package build rules, or at least it's incomplete. I'd
> not tested this before except for building as a host tool. Clearly it
> needs some TLC. Unfortunately I don't have time to do this right now.
> Maybe you could try to fix it and submit back a patch. Often what is
> needed in a case like this is to pre-supply the answer to configure with
> the appropriate symbol (you need to look into configure). There
> examples in other .spec files along the lines of:
>
> ac_cv_xxx_xxx=y ./configure .....
>
> Regards, Stuart
>
>
> Tim Nelson wrote:
> > As noted in an earlier post, I'm attempting to get LTIB working on
> a Phytec board with the LPC3205 SoC. The latest build was stopped
> with the relevant last lines of output below:
> >
> > ---BEGIN---
> > checking for extra flags to get ANSI library prototypes...
> configure: error: cannot run test program while cross compiling
> > See `config.log' for more details.
> > configure: error: /bin/sh './configure' failed for glib-1.2.8
> > error: Bad exit status from /usr/src/ltib/tmp/rpm-tmp.19931 (%build)
> >
> >
> > RPM build errors:
> > Bad exit status from /usr/src/ltib/tmp/rpm-tmp.19931 (%build)
> > Build time for pkgconfig: 53 seconds
> >
> > Failed building pkgconfig
> >
> >
> > f_buildrpms() returned an error, exiting
> > traceback:
> > main:567
> >
> >
> > Started: Mon Jul 26 09:06:32 2010
> > Ended: Mon Jul 26 09:09:31 2010
> > Elapsed: 179 seconds
> >
> > VERSION : 10.1.1
> > CVS_VERSION : $Revision: 1.68 $ (Savannah)
> > PLATFORM : phy3250
> > GNUTARCH : arm
> > TOOLCHAIN : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm
> > TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp
> >
> > These packages failed to build:
> > pkgconfig
> >
> > Build Failed
> >
> > Exiting on error or interrupt
> > ---END---
> >
> > Any thoughts?
> >
> > --Tim
> >
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden <mailto:address@hidden>
> http://lists.nongnu.org/mailman/listinfo/ltib
>
>