[Ltib] RE: Install Dillo Problem

[Kevin Wells]

Hi Vix,

You'll need to export the DISPLAY environment variable before
running dillo. Something like:

nxp$ export DISPLAY=localhost:0.0

Kevin

> -----Original Message-----
> Subject: Re: Install Dillo Problem
> 
> Hi Kevin,
> 
> Ok, Ack. I will wait for further instructions on how to get Dillo up and
> running.
> Just to make sure I'm on the right track, after adding the C++ libs, I get
> this:
> 
> address@hidden /]# dillo
> paths: Cannot open file '//.dillo/dillorc'
> paths: Using /usr/etc/dillo/dillorc
> paths: Cannot open file '//.dillo/keysrc'
> paths: Using /usr/etc/dillo/keysrc
> dillo_dns_init: Here we go! (threaded)
> Cookies: Created file: //.dillo/cookiesrc
> Disabling cookies.
> Can't open display ""
> address@hidden /]#
> 
> Thanks,
> Vic
> 
> 
> ----- Original Message -----
> From: "Kevin Wells" <address@hidden>
> To: "Vic" <address@hidden>; <address@hidden>
> Sent: Friday, October 01, 2010 12:09 PM
> Subject: RE: [Ltib] Re: Install Dillo Problem
> 
> 
> Hi Vic,
> 
> The shared C++ library is not being copied to the rootfs image.
> This is a config error in the EA3250 platform defconfig and will be
> fixed. For now, you can just manually add the library in the LTIB
> main menu (ltib --config) and then selecting the Toolchain
> component options-> and then ticking the c++ shared libraries
> option.
> 
> I've got Dillo running on the boards, but a few more patches are
> needed to make it work.
> X11 kmode patch
> EA porch limit fix
> 
> You can see the X11 mode patch in another email.
> I'll push up the EA porch fix in a few hours. You will have to
> update your SVN code to get the changes.
> 
> thanks,
> Kevin
> 
> 
> > -----Original Message-----
> > From: address@hidden [mailto:ltib-
> > address@hidden On Behalf Of Vic
> > Sent: Friday, October 01, 2010 1:37 AM
> > To: address@hidden
> > Subject: [Ltib] Re: Install Dillo Problem
> >
> > Hi Stuart,
> >
> > Gee, I feel stupid. <bg> I assumed it auto selected all dependencies as
> it
> > did some. Anyway, the build was successful after X11 install but when I
> > run
> > dillo it's looking for <libstdc++.so.6>.such as
> >
> > address@hidden /]# dillo
> > dillo: error while loading shared libraries: libstdc++.so.6: cannot open
> > shared      object file: No such file or directory
> >
> > Is this a wrong path issue? What should I do now as I can't seem to find
> a
> > standalone RPM for it. Is there any documentation I should be reading to
> > get
> > thru this without bothering you so much?
> >
> > Many Thanks,
> > Vic
> >
> >
> >
> > > Date: Thu, 30 Sep 2010 21:18:13 +0100
> > > From: Stuart Hughes <address@hidden>
> > > Subject: Re: [Ltib] Install Dillo problem
> > > To: Vic <address@hidden>
> > > Cc: ltib mail <address@hidden>
> > > Message-ID: <address@hidden>
> > > Content-Type: text/plain; charset=ISO-8859-1
> > >
> > > Hi Vic,
> > >
> > > It may be that you do not have X selected in your configuration.
> > >
> > > To check this, run:
> > >
> > > $ ./ltib -m config
> > >
> > > // quick way,
> > >
> > > type s and in the search dialog enter Xorg
> > >
> > > make sure the cross is marked in :
> > >
> > > (X) X.Org 7.3
> > >
> > > // alternative longer way
> > >
> > > scroll down and select --- Package selection / Package list ---->
> > >
> > > scroll down and find:
> > >
> > > [ ] xfsprogs
> > >   X11  --->
> > > [ ] yaffs_utils
> > >
> > > Highlight X11 and click enter, make sure for Install X11 it says:
> > > (X.Org 7.3)
> > > if not, click enter and select it.
> > >
> > > When you're done, save/exit and then run:
> > >
> > > $ ./ltib
> > >
> > > Regards, Stuart
> > >
> > >
> > > Vic wrote:
> > >> Hi,
> > >>
> > >> I'm new to Linux and just bought an EA LPC3250. I finished the
> "Getting
> > >> Started with Linux on the LPC3250 OEM board" guide and had a
> successful
> > >> build using the default configuration but only when I use 2.6.27.8
> > >> instead of the 2.6.34 kernel. My objective is to run a Web browser
> and
> > >> so I selected dillo from the LTIB configuration package list. When I
> > run
> > >> ./ltib, it failed on libXrender as seen below. and even if I deselect
> > >> dillo, the libXrender error stays.
> > >>
> > >> 1. How do recover from this? It seems the compilation messages have
> > >> enough info to tell me what exactly is causing the issue.
> > >> 2. What and Where is the file that has the environment settings? The
> > >> guide mentioned about configuration settings such as CONFIG_NET and
> > >> CONFIG_LPC32XX_MII but didnt mention where they are set.
> > >>
> > >> Any help shall be very much appreciated.
> > >>
> > >> Vic
> > >>
> > >> here's the trail
> > >> ...
> > >> checking how to hardcode library paths into programs... immediate
> > >> appending configuration tag "F77" to libtool
> > >> checking for arm-linux-pkg-config... no
> > >> checking for pkg-config... /opt/ltib/usr/bin/pkg-config
> > >> checking pkg-config is at least version 0.9.0... yes
> > >> checking for X... configure: error: Package requirements (x11) were
> not
> > >> met:
> > >>
> > >> No package 'x11' found
> > >>
> > >> Consider adjusting the PKG_CONFIG_PATH environment variable if you
> > >> installed software in a non-standard prefix.
> > >>
> > >> Alternatively, you may set the environment variables X_CFLAGS
> > >> and X_LIBS to avoid the need to call pkg-config.
> > >> See the pkg-config man page for more details.
> > >>
> > >> error: Bad exit status from /home/user/ltib/tmp/rpm-tmp.60081 (%build)
> > >>
> > >>
> > >> RPM build errors:
> > >>     Bad exit status from /home/user/ltib/tmp/rpm-tmp.60081 (%build)
> > >> Build time for libXrender: 16 seconds
> > >>
> > >> Failed building libXrender
> > >>
> > >>
> > >> f_buildrpms() returned an error, exiting
> > >> traceback:
> > >>  main:567
> > >>
> > >>
> > >> Started: Thu Sep 30 02:37:46 2010
> > >> Ended:   Thu Sep 30 02:41:40 2010
> > >> Elapsed: 234 seconds
> > >>
> > >> VERSION          : 10.1.1
> > >> CVS_VERSION      : $Revision: 1.71 $ (Savannah)
> > >> PLATFORM         : ea3250
> > >> GNUTARCH         : arm
> > >> TOOLCHAIN        : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm
> > >> TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp
> > >>
> > >> These packages failed to build:
> > >> libXrender
> > >>
> > >> Build Failed
> > >>
> > >> Exiting on error or interrupt
> > >> address@hidden:~/ltib$ <mailto:address@hidden:~/ltib$>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> ---------------------------------------------------------------------
> --
> > -
> > >>
> > >> _______________________________________________
> > >> LTIB home page: http://ltib.org
> > >>
> > >> Ltib mailing list
> > >> address@hidden
> > >> http://lists.nongnu.org/mailman/listinfo/ltib
> > >
> > >
> > >
> >
> >
> >
> > _______________________________________________
> > LTIB home page: http://ltib.org
> >
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib
>