[Ltib] RE: Install Dillo Problem

[Kevin Wells]

Hi Vic,

You'll need to use the 2.6.34 port. It has the changes you need.
I just did a test build of 2.6.34 with all updates from SVN and
was able to build the kernel without any errors. Can you post
your errors?

You need to apply that patch on the kmode.c file in the
./ltib/rpm/BUILD/xorg-server folder unpacked by LTIB. I believe
you can install the source with './ltib --leavesrc xrog-server'.

Kevin

> -----Original Message-----
> From: Vic [mailto:address@hidden
> Sent: Tuesday, October 05, 2010 1:28 AM
> To: Kevin Wells
> Cc: ltib mail
> Subject: Re: Install Dillo Problem
> 
> Kevin,
> 
> Ok, Just want to confirmto avoid any mistakes. I can't successfully
> compile
> in 2.6.34 and so I renamed the /BUILD/2.6.27.8 instead. It doesnt have to
> be
> on 2.6.34,right?
> 
> Then the X11 source that I have to install in ubuntu 9.04 MUST to be
> 7.3,right?
> Then I should apply your display patch on kmode.c,right?
> 
> Thanks,
> Vic
> 
> 
> 
> ----- Original Message -----
> From: "Kevin Wells" <address@hidden>
> To: "Vic" <address@hidden>; <address@hidden>
> Sent: Monday, October 04, 2010 9:56 AM
> Subject: RE: Install Dillo Problem
> 
> 
> Hi Vic,
> 
> You'll need to do a 'cvs up' in your ltib directory to get
> the changes. You should also rename or delete the
> linux-2.6.34 directory in ./rpm/BUILD so the changes will
> be correctly installed.
> 
> The easiest way to install the X11 changes is to install the
> Xorg-server source and then manually apply the changes to
> the file.
> 
> Rebuild all and you should be ok. Install a USB mouse into
> the USB host port, boot your board to Linux, and then....
> 
> Xfbdev -mouse mouse &
> export DISPLAY=localhost:0.0
> dillo &
> 
> It worked great over here, but the rendering has problems on
> some pages with some large blank regions. You might be able
> to get some tuning info from Dillo's website. The performance
> was quite good.
> 
> Kevin
> 
> 
> > -----Original Message-----
> > From: Vic [mailto:address@hidden
> > Sent: Sunday, October 03, 2010 8:24 PM
> > To: address@hidden
> > Cc: Kevin Wells
> > Subject: Re: Install Dillo Problem
> >
> > Hi Kevin,
> >
> > How do I update the SVN code and install the X11 patch?
> >
> > Thanks,
> > Vic
> >
> >
> >
> 
>