[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Strange Surging Behavior

From: Maik Höpfel
Subject: Re: [Paparazzi-devel] Strange Surging Behavior
Date: Mon, 12 Jul 2010 21:37:52 +0200

Yes, especially digital servos can get very high peak currents. Just hook them up to the BEC from your speed controller.

- Maik

Am 12.07.2010 20:15 schrieb "Felix Ruess" <address@hidden>:

Hi Jeff,

to me that sounds like your servos are drawing too much power with the
more rapid corrections of the AUTO modes. Especially since it works if
you have one or two disconnected.
If the servos draw too much current the voltage will break down and
the twog probably resets.
I would recommend to check that and maybe use an extra power source
for your servos.

Cheers, Felix

On Mon, Jul 12, 2010 at 7:07 PM, <address@hidden> wrote:
> Hello All,
> I am experiencing ...

> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]