[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Have anyone successfully combine paparazzi uav wit

From: Yannick Jestin
Subject: Re: [Paparazzi-devel] Have anyone successfully combine paparazzi uav with the qgroundcontrol ?
Date: Mon, 14 Mar 2016 21:19:19 +0100

> On 14 Mar 2016, at 21:12, Felix Ruess <address@hidden> wrote:
> Hi,
> You can load the mavlink module to use most basic functionalities of 
> QGroundControl, but that does not help you in any way with your magnetometer 
> calibration!
> You should follow Prof. Warmers suggestions and do that test. If current is 
> the problem, you can also try to calibrate for that:
> I also started writing a simple mag calibration script that reads the 
> IMU_MAG_RAW data live and directly displays the data in 3D while recording it:
> When you have enough points covering good portions of the sphere, close the 
> plot window and it will continue and output the calibration.
> Haven't had time to improve the script further yet..

   ENAC Student have written a "not so shabby" python/Qt program to perform all 
three calibrations, we hope to release them soon. If anyone is interested in 
cleaning up the code, feel free to jump in !


reply via email to

[Prev in Thread] Current Thread [Next in Thread]