[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Bayonne-devel] Intel Dialogic System Release 6.1 and Bayonne
From: |
Julien Chavanton |
Subject: |
RE: [Bayonne-devel] Intel Dialogic System Release 6.1 and Bayonne |
Date: |
Wed, 3 Aug 2005 13:33:32 -0400 |
I think I am missing some information.
Strangely this problem/limitation takes place only when there are more
then 3 or more dual boards present.
I hope I have the correct problem description.
Julien
-----Original Message-----
From: address@hidden [mailto:address@hidden
Sent: August 3, 2005 1:16 PM
To: address@hidden
Cc: Julien Chavanton; Ambar Roy; mailing_list_bayonne-devel
Subject: Re: [Bayonne-devel] Intel Dialogic System Release 6.1 and
Bayonne
Hum ???
We use Red Hat 7.3 Linux (2.4.18-3) with R 5.1 SP1 with MORE than 512MB
our config :
# cat /usr/dialogic/cfg/buildinfo
Intel Corporation System Software for Linux Intel
System Release 5.1 for Linux Intel SP1
Build Date=09/13/2002
Build Number=22
# cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 1584857088 109162496 1475694592 0 29310976 40333312
Swap: 2089209856 0 2089209856
MemTotal: 1547712 kB
MemFree: 1441108 kB
MemShared: 0 kB
Buffers: 28624 kB
Cached: 39388 kB
SwapCached: 0 kB
Active: 84828 kB
Inact_dirty: 140 kB
Inact_clean: 1072 kB
Inact_target: 17208 kB
HighTotal: 654456 kB
HighFree: 593828 kB
LowTotal: 893256 kB
LowFree: 847280 kB
SwapTotal: 2040244 kB
SwapFree: 2040244 kB
Committed_AS: 183504 kB
Emmanuel
On Wed, Aug 03, 2005 at 10:10:31AM -0500, David Sugar wrote:
> Hmm...I had a test server I was experiancing this problem on also,
> though it already had more than 512m, so I didn't realize at the time
> this was the issue.
>
> Julien Chavanton wrote:
> >Because else Dialogic 5.1 SP1 or SR1 does not start with more then
512MB
> >on the server.
> >
> >I found this while adding memory in an old server and since then I
face
> >this problem on every servers.
> >
> >I have to limit memory in lilo or grub.
> >
> >image=/boot/vmlinuz-2.4.18-5
> > label=linux
> > initrd=/boot/initrd-2.4.18-5.img
> > read-only
> > root=/dev/hda3
> > append="mem=511M"
> >
> >I can leave with 512MB and springware boards but it would be better
if I
> >can find the fix and be able use more memory.
> >
> >Julien
> >
> >
> >
> >-----Original Message-----
> >From: David Sugar [mailto:address@hidden
> >Sent: August 2, 2005 11:27 PM
> >To: Julien Chavanton
> >Cc: address@hidden; Ambar Roy; mailing_list_bayonne-devel
> >Subject: Re: [Bayonne-devel] Intel Dialogic System Release 6.1 and
> >Bayonne
> >
> >What happened if you had more than 512 meg? I guess 5.1sp2 would
also
> >work okay also with rhel 2.1/centos 2 since it was rh 7.x based...
> >
> >Julien Chavanton wrote:
> >
> >>Something annoying, 6.1 is not supporting spring ware board ;(
> >>
> >>I think the most updated drivers (this year) is:
> >>
> >>Intel(r) Dialogic(r) System Release 5.1 Feature Pack 2 for Linux
> >
> >Service
> >
> >>Update 45.
> >>
> >>
> >
>
>http://resource.intel.com/telecom/support/releases/unix51/linux51fp1/On
l
> >
> >>doc/update/relnotes.pdf
> >>
> >>I hope Intel/Dialogic can give you a free version to encourage
> >
> >everybody
> >
> >>to purchase this drivers update.
> >>
> >>I have problem with memory limitation on previous drivers; I was
never
> >>able to set more the 512 MB on my Linux server.
> >>
> >>Julien
> >>
> >>
> >>
> >>-----Original Message-----
> >>From:
> >
> >address@hidden
> >
>
>[mailto:address@hidden
r
> >
> >>g] On Behalf Of David Sugar
> >>Sent: August 2, 2005 6:42 AM
> >>To: Ambar Roy
> >>Cc: 'mailing_list_bayonne-devel'
> >>Subject: Re: [Bayonne-devel] Intel Dialogic System Release 6.1 and
> >>Bayonne
> >>
> >>I would like to setup a test system here to get the bayonne2
dialogic
> >>drivers back to an operational level sometime this year, but what
> >>distros is 6.1 directly supporting?
> >>
> >>Ambar Roy wrote:
> >>
> >>
> >>>Tony,
> >>>
> >>>I have no idea on 6.1 release under linux except what I have read
on
> >>
> >>intel
> >>
> >>
> >>>site. My experience on windows has shown that the 6.x series should
be
> >>>backward compatible with 5.x series. Gc_basic_call_model is a
sample
> >>
> >>gc app
> >>
> >>
> >>>that comes with dialogic system release.
> >>>
> >>>Regards,
> >>>
> >>>Ambar Roy
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>>-----Original Message-----
> >>>>From: Tony Stocker [mailto:address@hidden
> >>>>Sent: Monday, August 01, 2005 10:18 PM
> >>>>To: mailing_list_bayonne-devel
> >>>>Subject: Re: [Bayonne-devel] Intel Dialogic System Release
> >>>>6.1 and Bayonne
> >>>>
> >>>>Ambar,
> >>>>
> >>>>I was hoping to run Bayonne on a Mandrake 10.x system and it
looked
> >>>
> >>>>from the documentation that the 5.1 materials weren't rated to run
on
> >>>
> >>>
> >>>>it, whereas the 6.1 suggests that it at least supports 10.1.
> >>>>
> >>>>Do you think the 6.1 package might contain all of the elements
that
> >>>>used to be in the three 5.1 packages?
> >>>>
> >>>>Is the Gc_basic_call_model a program? If so, where can I find it?
> >>>>
> >>>>Thanks for the help.
> >>>>
> >>>>Tony
> >>>>
> >>>>On 7/26/05, mailing_list_bayonne-devel <address@hidden>
wrote:
> >>>>
> >>>>
> >>>>
> >>>>>Hi Tony,
> >>>>>
> >>>>>You can always download and run SR 5.1 and install the SP1.
> >>>>
> >>>>Although 6.1
> >>>>
> >>>>
> >>>>
> >>>>>should be fully backward compatible with 5.1.
> >>>>>
> >>>>>First set up 6.1 and run some sample programs.
> >>>>
> >>>>Gc_basic_call_model is a good
> >>>>
> >>>>
> >>>>
> >>>>>one to try. And then try running bayonne.
> >>>>>
> >>>>>Regards,
> >>>>>
> >>>>>Ambar Roy
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>>-----Original Message-----
> >>>>>>From: Tony Stocker [mailto:address@hidden
> >>>>>>Sent: Tuesday, July 26, 2005 2:21 AM
> >>>>>>To: address@hidden
> >>>>>>Subject: [Bayonne-devel] Intel Dialogic System Release
> >>>>
> >>>>6.1 and Bayonne
> >>>>
> >>>>
> >>>>
> >>>>>>Hello All,
> >>>>>>
> >>>>>>We recently purchased an Intel Dialogic D/41-JCT-LS board and
the
> >>>>>>System Release 6.1 for Linux with the intention of
> >>>>
> >>>>installing it for
> >>>>
> >>>>
> >>>>
> >>>>>>use with Bayonne. However the documentation at
> >>>>>>http://www.gnu.org/software/bayonne/documentation.html
> >>>>
> >>>>seems to refer
> >>>>
> >>>>
> >>>>
> >>>>>>only to version 5.1 and talks about needing three
> >>>>
> >>>>different packages
> >>>>
> >>>>
> >>>>
> >>>>>>(Service Release, Service Pack, Feature Pack) and the CD that we
> >>>>>>received from Intel only seems to have one package on it.
> >>>>>>
> >>>>>>I'm curious to know if anyone has setup Bayonne with a
> >>>>
> >>>>Dialogic board
> >>>>
> >>>>
> >>>>
> >>>>>>and the 6.1 system release.
> >>>>>>
> >>>>>>Thanks,
> >>>>>>
> >>>>>>Tony
> >>>>>>
> >>>>>>
> >>>>>>_______________________________________________
> >>>>>>Bayonne-devel mailing list
> >>>>>>address@hidden
> >>>>>>http://lists.gnu.org/mailman/listinfo/bayonne-devel
> >>>>>>
> >>>>>>
> >>>>>
> >>>>>
> >>>>_______________________________________________
> >>>>Bayonne-devel mailing list
> >>>>address@hidden
> >>>>http://lists.gnu.org/mailman/listinfo/bayonne-devel
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>>
> >>>_______________________________________________
> >>>Bayonne-devel mailing list
> >>>address@hidden
> >>>http://lists.gnu.org/mailman/listinfo/bayonne-devel
> _______________________________________________
> Bayonne-devel mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/bayonne-devel
--