Re: [shell-script] Uptime de Serviços

[Julio C. Neves]

Luiz,
É muito difícil corrigir uma coisa, sem ver o fonte, pois não tenho a menor
ideia de quem é essa tal de linha 53, que está dando erro.

Para acabar com o mimimi, adapteia as linhas do código para executá-las no
prompt e ir debugando. Veja:


$ Reg='938 0-01:07:08'
$ set - 938  # Passando parametro para trabalhar no prompt
$ echo $1
938
$ echo $0
bash
$ IFS=' -:' read Lixo Dias Horas Mins Secs <<< "$Reg"
$ echo $Dias
0
$ echo $Horas
01
$ echo $Mins
07
$ echo $Secs
08
$ # opa, até aqui, blz!
$ dia_s=`echo $((10#$Dias*$um_dia))`
$ echo $dia_s
0
$ hora_s=`echo $((10#$Horas*$uma_hora))`
$ echo $hora_s
3600
$ min_s=`echo $((10#$Mins*$um_minuto))`
$ echo $min_s
420
$ # Chuchu beleza! agora vamos finalizar sem erro...
$ echo "Uptime $1 em segundos: $((dia_s+hora_s+min_s+10#$Secs))"
Uptime 938 em segundos: 4028
$ # Ou, pra ficar melhor ainda:
$ echo "Uptime do processo $1 em segundos: $((dia_s+hora_s+min_s+10#$Secs))"
Uptime do processo 938 em segundos: 4028

Agora, vc terá de se virar sozinho, pq pra mim é ponto.


Abcs,
Julio
*@juliobash
*



Em 10 de julho de 2013 10:04, Luiz Sales <address@hidden> escreveu:

> **
>
>
> Os erros continuam no
>
> [root@D01LS150V ~]# /home/zabbix/procupdate.sh smbd
> 938 0-01:07:08
> /home/zabbix/procupdate.sh: line 53: 0+3600+min_s+08: value too great for
> base (error token is "08")
> [root@D01LS150V ~]# /home/zabbix/procupdate.sh smbd
> 938 0-01:07:09
> /home/zabbix/procupdate.sh: line 53: 0+3600+min_s+09: value too great for
> base (error token is "09")
> [root@D01LS150V ~]# /home/zabbix/procupdate.sh smbd
> 938 0-01:07:10
> 4030
>
> isso é um grao de arroz..
>
> 2013/7/10 Julio C. Neves <address@hidden>
>
> > >
> > >
> > >
> > > #!/bin/sh
> > > um_dia="86400"
> > > uma_hora="3600"
> > > um_minuto="60"
> > >
> > Reg=$(ps -eo pid,etime | grep $1) || {
> > echo "Processo nao encontrado!"
> > exit 1
> > }
> > # Se nãhouver dias, colocarei 0-
> >
> > > grep -F '-' <<< "$Reg" || Reg=$(sed -r "s/$processo +/$processo 0-/"
> <<<
> > >
> > > "$Reg")
> > > # Se nãtiver Hora, completa
> > > com 00:
> > >
> > >
> > > grep -E '0-([0-9]{2}:){2}[0-9]{2}' <<< $Reg || Reg=$(sed 's/0-/0-00:/'
> > <<<
> > > $Reg)
> > >
> > > IFS=' -:' read Lixo Dias Horas Mins Secs <<< "$Reg"
> > > dia_s=`echo $((10#$Dias*$um_dia))`
> > > hora_s=`echo $((10#$Horas*$uma_hora))`
> > > min_s=`echo $((10#$Mins*$um_minuto))`
> > >
> > > echo "Uptime $1 em segundos: $(($dia_s+$hora_s+min_s+
> > > 10#
> > > $Secs))"
> > >
> > > 2013/7/9 Julio C. Neves <address@hidden>
> > >
> > > > Ou então, melhor ainda, avise que está na base 10 (decimal)
> > > >
> > > > echo $((10#Dias*Um_Dia))
> > > >
> > > > Abcs,
> > > > Julio
> > > > *@juliobash
> > > > *
> > > >
> > > >
> > > >
> > > > Em 9 de julho de 2013 18:50, Luiz Sales <address@hidden>
> escreveu:
> > > >
> > > > > **
> > > > >
> > > > >
> > > > > Por enquanto corrigidos assim:
> > > > >
> > > > > # Bug do Octal
> > > > >
> > > > > #Dia=`echo $Dias | sed 's/^0*//'`
> > > > > Hora=`echo $Horas | sed 's/^0*//'`
> > > > > Min=`echo $Mins | sed 's/^0*//'`
> > > > >
> > > > > 2013/7/9 Luiz Sales <address@hidden>
> > > > >
> > > > > > Surgiram alguns erros.. com relação as horas, minutos..
> > > > > >
> > > > > > [root@D01LS150V ~]# /home/zabbix/procupdate.sh nmbd
> > > > > > + um_dia=86400
> > > > > > + uma_hora=3600
> > > > > > + um_minuto=60
> > > > > > ++ ps h -C nmbd
> > > > > > ++ head -n1
> > > > > > ++ awk '{print $1}'
> > > > > > + processo=1980
> > > > > > ++ ps -eo pid,etime
> > > > > > ++ grep 1980
> > > > > > + Reg=' 1980 32-00:40:19'
> > > > > > + grep -F -
> > > > > > 1980 32-00:40:19
> > > > > > + grep -E '0-([0-9]{2}:){2}[0-9]{2}'
> > > > > > ++ sed s/0-/0-00:/
> > > > > > + Reg='1980 32-00:40:19'
> > > > > > + IFS=' -:'
> > > > > > + read Lixo Dias Horas Mins Secs
> > > > > > ++ echo 2764800
> > > > > > + dia_s=2764800
> > > > > > + echo 'Dia: 2764800'
> > > > > > Dia: 2764800
> > > > > > ++ echo 0
> > > > > > + hora_s=0
> > > > > > + echo 'Hora: 0'
> > > > > > Hora: 0
> > > > > > ++ echo 2400
> > > > > > + min_s=2400
> > > > > > + echo 'Minuto: 2400'
> > > > > > Minuto: 2400
> > > > > > + echo 2767219
> > > > > > 2767219
> > > > > > [root@D01LS150V ~]# /home/zabbix/procupdate.sh smbd
> > > > > > + um_dia=86400
> > > > > > + uma_hora=3600
> > > > > > + um_minuto=60
> > > > > > ++ ps h -C smbd
> > > > > > ++ head -n1
> > > > > > ++ awk '{print $1}'
> > > > > > + processo=6139
> > > > > > ++ ps -eo pid,etime
> > > > > > ++ grep 6139
> > > > > > + Reg=' 6139 08:18:50'
> > > > > > + grep -F -
> > > > > > ++ sed -r 's/6139 +/6139 0-/'
> > > > > > + Reg=' 6139 0-08:18:50'
> > > > > > + grep -E '0-([0-9]{2}:){2}[0-9]{2}'
> > > > > > 6139 0-08:18:50
> > > > > > + IFS=' -:'
> > > > > > + read Lixo Dias Horas Mins Secs
> > > > > > ++ echo 0
> > > > > > + dia_s=0
> > > > > > + echo 'Dia: 0'
> > > > > > Dia: 0
> > > > > > /home/zabbix/procupdate.sh: line 22: 08: value too great for base
> > > > (error
> > > > > > token is "08")
> > > > > > + hora_s=
> > > > > > + echo 'Hora: '
> > > > > > Hora:
> > > > > > ++ echo 1080
> > > > > > + min_s=1080
> > > > > > + echo 'Minuto: 1080'
> > > > > > Minuto: 1080
> > > > > > /home/zabbix/procupdate.sh: line 28: 0++min_s+50: syntax error in
> > > > > > expression (error token is "++min_s+50")
> > > > > > [root@D01LS150V ~]# /home/zabbix/procupdate.sh slapd
> > > > > > + um_dia=86400
> > > > > > + uma_hora=3600
> > > > > > + um_minuto=60
> > > > > > ++ ps h -C slapd
> > > > > > ++ awk '{print $1}'
> > > > > > ++ head -n1
> > > > > > + processo=4685
> > > > > > ++ ps -eo pid,etime
> > > > > > ++ grep 4685
> > > > > > + Reg=' 4685 34-02:09:42'
> > > > > > + grep -F -
> > > > > > 4685 34-02:09:42
> > > > > > + grep -E '0-([0-9]{2}:){2}[0-9]{2}'
> > > > > > ++ sed s/0-/0-00:/
> > > > > > + Reg='4685 34-02:09:42'
> > > > > > + IFS=' -:'
> > > > > > + read Lixo Dias Horas Mins Secs
> > > > > > ++ echo 2937600
> > > > > > + dia_s=2937600
> > > > > > + echo 'Dia: 2937600'
> > > > > > Dia: 2937600
> > > > > > ++ echo 7200
> > > > > > + hora_s=7200
> > > > > > + echo 'Hora: 7200'
> > > > > > Hora: 7200
> > > > > > /home/zabbix/procupdate.sh: line 24: 09: value too great for base
> > > > (error
> > > > > > token is "09")
> > > > > > + min_s=
> > > > > > + echo 'Minuto: '
> > > > > > Minuto:
> > > > > > + echo 2944842
> > > > > > 2944842
> > > > > > [root@D01LS150V ~]#
> > > > > >
> > > > > > Pode ser algo com o sed la de cima...
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > 2013/7/9 Luiz Sales <address@hidden>
> > > > > >
> > > > > >> Erro meu... variaveis nao condiziam... desculpe.
> > > > > >>
> > > > > >>
> > > > > >> 2013/7/9 Luiz Sales <address@hidden>
> > > > > >>
> > > > > >>> Li o seu codigo, porem quando copiei e colei, eu percebi que o
> > > mesmo
> > > > > >>> adicionou o 0- antes dos serviços que nao tem dias e deixou os
> > > > > serviços com
> > > > > >>> dias intactos, porem nao consegui assimilar como colocaria no
> meu
> > > > > codigo..
> > > > > >>>
> > > > > >>> copiando e colando continuam os mesmos erros..
> > > > > >>>
> > > > > >>> [root@D01LS150V ~]# ./prc.sh smbd
> > > > > >>> 648 0-01:24:52
> > > > > >>> ./prc.sh: line 19: *86400: syntax error: operand expected
> (error
> > > > token
> > > > > >>> is "*86400")
> > > > > >>> Dia:
> > > > > >>> ./prc.sh: line 21: *3600: syntax error: operand expected (error
> > > token
> > > > > is
> > > > > >>> "*3600")
> > > > > >>> Hora:
> > > > > >>> ./prc.sh: line 23: *60: syntax error: operand expected (error
> > token
> > > > is
> > > > > >>> "*60")
> > > > > >>> Minuto:
> > > > > >>> Uptime smbd em segundos: 1
> > > > > >>> 2
> > > > > >>> [root@D01LS150V ~]# ./prc.sh sshd
> > > > > >>> 1487 36-07:13:07
> > > > > >>> ./prc.sh: line 19: *86400: syntax error: operand expected
> (error
> > > > token
> > > > > >>> is "*86400")
> > > > > >>> Dia:
> > > > > >>> ./prc.sh: line 21: *3600: syntax error: operand expected (error
> > > token
> > > > > is
> > > > > >>> "*3600")
> > > > > >>> Hora:
> > > > > >>> ./prc.sh: line 23: *60: syntax error: operand expected (error
> > token
> > > > is
> > > > > >>> "*60")
> > > > > >>> Minuto:
> > > > > >>> Uptime sshd em segundos: 1
> > > > > >>> 2
> > > > > >>>
> > > > > >>>
> > > > > >>>
> > > > > >>> 2013/7/9 Julio C. Neves <address@hidden>
> > > > > >>>
> > > > > >>> Luiz, favor ser mais explicito. O que "não fechou" significa.
> > > Escrevi
> > > > > >>>> umas
> > > > > >>>> 30 linhas para te ajudar e vc me responde em 1/2 linha!
> > > > > >>>>
> > > > > >>>> Abcs,
> > > > > >>>> Julio
> > > > > >>>> *@juliobash
> > > > > >>>> *
> > > > > >>>>
> > > > > >>>>
> > > > > >>>>
> > > > > >>>> Em 9 de julho de 2013 16:58, Luiz Sales <address@hidden>
> > > > escreveu:
> > > > > >>>>
> > > > > >>>> > **
> > > > > >>>> >
> > > > > >>>> >
> > > > > >>>> > Julio,
> > > > > >>>> > Nao consegui entender seu raciocinio, e quando no shell,
> > alguma
> > > > > linha
> > > > > >>>> nao
> > > > > >>>> > fechou :P
> > > > > >>>> >
> > > > > >>>> > Marcelo,
> > > > > >>>> > Pelo que vi, com esse codigo eu perco os meus dias.. se eles
> > > > > >>>> existirem..
> > > > > >>>> >
> > > > > >>>> > deixei da seguinte maneira..
> > > > > >>>> >
> > > > > >>>> > day=$(ps -eo pid,time | sed -r 's/ (([0-9]{2}:){2}[0-9]{2})/
> > > > > 0-\1/g' |
> > > > > >>>> > grep $processo | awk -F " " '{print $2}' | awk -F "-"
> '{print
> > > > $1}')
> > > > > >>>> > echo "Dias: $day"
> > > > > >>>> >
> > > > > >>>> > [root@D01LS150V ~]# ./procupdate.sh sshd
> > > > > >>>> > Dias: 0
> > > > > >>>> > Dia: 0
> > > > > >>>> > Hora: 21600
> > > > > >>>> > Minuto: 960
> > > > > >>>> > Uptime sshd em segundos: 22562
> > > > > >>>> > 22562
> > > > > >>>> > [root@D01LS150V ~]# ./procupdate.sh slapd
> > > > > >>>> > Dias: 0
> > > > > >>>> > Dia: 0
> > > > > >>>> > Hora: 0
> > > > > >>>> > Minuto: 2460
> > > > > >>>> > Uptime slapd em segundos: 2519
> > > > > >>>> > 2519
> > > > > >>>> >
> > > > > >>>> > e sem o seu codigo..
> > > > > >>>> >
> > > > > >>>> > [root@D01LS150V ~]# ./procupdate.sh sshd
> > > > > >>>> > Dias: 36
> > > > > >>>> > Dia: 3110400
> > > > > >>>> > Hora: 21600
> > > > > >>>> > Minuto: 1020
> > > > > >>>> > Uptime sshd em segundos: 3133072
> > > > > >>>> > 3133072
> > > > > >>>> > [root@D01LS150V ~]# ./procupdate.sh slapd
> > > > > >>>> > Dias: 34
> > > > > >>>> > Dia: 2937600
> > > > > >>>> > Hora: 0
> > > > > >>>> > Minuto: 2580
> > > > > >>>> > Uptime slapd em segundos: 2940228
> > > > > >>>> > 2940228
> > > > > >>>> >
> > > > > >>>> > alterando um pouco o script..
> > > > > >>>> >
> > > > > >>>> > # Pega a quantos dias o processo ta rodando.
> > > > > >>>> > day=$(ps -eo pid,etime | grep $processo | awk -F " " '{print
> > > $2}'
> > > > |
> > > > > >>>> > awk -F "-" '{print $1}')
> > > > > >>>> > echo "Dias: $day"
> > > > > >>>> > if [ -z $day ];
> > > > > >>>> > then
> > > > > >>>> > day=$(ps -eo pid,time | sed -r 's/
> > > > > >>>> > (([0-9]{2}:){2}[0-9]{2})/ 0-\1/g' | grep $processo | awk -F
> "
> > "
> > > > > >>>> '{print
> > > > > >>>> > $2}' | awk -F "-" '{print $1}')
> > > > > >>>> > echo "Dias: $day"
> > > > > >>>> > fi
> > > > > >>>> >
> > > > > >>>> > [root@D01LS150V ~]# ./procupdate.sh sshd
> > > > > >>>> > Dias: 36
> > > > > >>>> > Dia: 3110400
> > > > > >>>> > Hora: 21600
> > > > > >>>> > Minuto: 1260
> > > > > >>>> > Uptime sshd em segundos: 3133316
> > > > > >>>> > 3133316
> > > > > >>>> > [root@D01LS150V ~]# ./procupdate.sh smbd
> > > > > >>>> > Dias: 33:47
> > > > > >>>> > ./procupdate.sh: line 32: 33:47*86400: syntax error in
> > > expression
> > > > > >>>> (error
> > > > > >>>> > token is ":47*86400")
> > > > > >>>> > Dia:
> > > > > >>>> > ./procupdate.sh: line 34: *3600: syntax error: operand
> > expected
> > > > > (error
> > > > > >>>> > token is "*3600")
> > > > > >>>> > Hora:
> > > > > >>>> > ./procupdate.sh: line 36: *60: syntax error: operand
> expected
> > > > (error
> > > > > >>>> token
> > > > > >>>> > is "*60")
> > > > > >>>> > Minuto:
> > > > > >>>> > Uptime smbd em segundos: 1
> > > > > >>>> > 2
> > > > > >>>> > [root@D01LS150V ~]#
> > > > > >>>> >
> > > > > >>>> > o smbd nao tem dias.. e o sshd tem..
> > > > > >>>> >
> > > > > >>>> > 2013/7/9 Marcelo Neto <address@hidden>
> > > > > >>>> >
> > > > > >>>> > > Melhorando o comando mais um pouquinho:
> > > > > >>>> > >
> > > > > >>>> > > *ps -eo pid,time | sed -r 's/ (([0-9]{2}:){2}[0-9]{2})/
> > > 0-\1/g'*
> > > > > >>>> > >
> > > > > >>>> > >
> > > > > >>>> > >
> > > > > >>>> > > Em 9 de julho de 2013 16:20, Marcelo Neto <
> > > > address@hidden>
> > > > > >>>> > > escreveu:
> > > > > >>>> > >
> > > > > >>>> > > > Seguinte,
> > > > > >>>> > > >
> > > > > >>>> > > > quando você executa somente "ps -eo pid,time" aparece o
> > > > > seguinte:
> > > > > >>>> > > >
> > > > > >>>> > > > 23574 1-14:09:54
> > > > > >>>> > > > 23650 00:00:02
> > > > > >>>> > > >
> > > > > >>>> > > > eu aconselharia adicionar "0-" antes das horas que não
> > > possuem
> > > > > >>>> dias
> > > > > >>>> > > > executando o comando com um sed:
> > > > > >>>> > > >
> > > > > >>>> > > > *ps -eo pid,time | sed -r 's/
> > > > > ([0-9][0-9]:[0-9][0-9]:[0-9][0-9])/
> > > > > >>>> > 0-\1/g
> > > > > >>>> > > > *
> > > > > >>>> > > > *
> > > > > >>>> > > > *
> > > > > >>>> > > > *23574 1-14:09:54*
> > > > > >>>> > > > *23650 0-00:00:02*
> > > > > >>>> > > >
> > > > > >>>> > > > com isso você padronizaria.
> > > > > >>>> > > >
> > > > > >>>> > > >
> > > > > >>>> > > > Em 9 de julho de 2013 15:18, Luiz Sales <
> > address@hidden>
> > > > > >>>> escreveu:
> > > > > >>>> > > >
> > > > > >>>> > > >> **
> > > > > >>>> > > >>
> > > > > >>>> > > >>
> > > > > >>>> > > >> Amigos,
> > > > > >>>> > > >>
> > > > > >>>> > > >> Estou trabalhando em uma soluçao para descobrir o
> uptime
> > > dos
> > > > > >>>> > serviços...
> > > > > >>>> > > >> eu estou buscando o resultado em segundos.
> > > > > >>>> > > >>
> > > > > >>>> > > >> Segue o script que "estou" desenvolvendo..
> > > > > >>>> > > >>
> > > > > >>>> > > >> #!/bin/sh -x
> > > > > >>>> > > >> um_dia="86400"
> > > > > >>>> > > >> uma_hora="3600"
> > > > > >>>> > > >> um_minuto="60"
> > > > > >>>> > > >>
> > > > > >>>> > > >> processo=$(ps h -C $1 | head -n1 | awk '{print $1}')
> > > > > >>>> > > >> if [ -z $processo ];
> > > > > >>>> > > >> then
> > > > > >>>> > > >> echo "Processo nao encontrado!"
> > > > > >>>> > > >> exit 1
> > > > > >>>> > > >> else
> > > > > >>>> > > >> # Pega a quantos dias o processo ta rodando.
> > > > > >>>> > > >> day=$(ps -eo pid,etime | grep $processo | awk -F " "
> > > '{print
> > > > > >>>> $2}' |
> > > > > >>>> > > >> awk -F "-" '{print $1}')
> > > > > >>>> > > >> echo $day
> > > > > >>>> > > >> if [ -z $day ];
> > > > > >>>> > > >> then
> > > > > >>>> > > >>
> > > > > >>>> > > >> day="0"
> > > > > >>>> > > >> fi
> > > > > >>>> > > >>
> > > > > >>>> > > >> # Calcular passado
> > > > > >>>> > > >> # Hora
> > > > > >>>> > > >> hour=$(ps -eo pid,etime | grep $processo | awk -F " "
> > > '{print
> > > > > >>>> $2}'
> > > > > >>>> > > >> | awk -F "-" '{print $2}' | awk -F ":" '{print $1}')
> > > > > >>>> > > >> echo $hour
> > > > > >>>> > > >> minute=$(ps -eo pid,etime | grep $processo | awk -F " "
> > > > '{print
> > > > > >>>> > > >> $2}' | awk -F "-" '{print $2}' | awk -F ":" '{print
> $2}')
> > > > > >>>> > > >> echo $minute
> > > > > >>>> > > >> seconds=$(ps -eo pid,etime | grep $processo | awk -F "
> "
> > > > > '{print
> > > > > >>>> > > >> $2}' | awk -F "-" '{print $2}' | awk -F ":" '{print
> $3}')
> > > > > >>>> > > >> echo $seconds
> > > > > >>>> > > >>
> > > > > >>>> > > >> dia_s=`echo $(($day*$um_dia))`
> > > > > >>>> > > >> echo "Dia: $dia_s"
> > > > > >>>> > > >> hora_s=`echo $(($hour*$uma_hora))`
> > > > > >>>> > > >> echo "Hora: $hora_s"
> > > > > >>>> > > >> min_s=`echo $(($minute*$um_minuto))`
> > > > > >>>> > > >> echo "Minuto: $min_s"
> > > > > >>>> > > >>
> > > > > >>>> > > >> echo "Uptime $1 em segundos:
> > > > $(($dia_s+$hora_s+min_s+seconds))"
> > > > > >>>> > > >> echo $(($dia_s+$hora_s+min_s+seconds))
> > > > > >>>> > > >>
> > > > > >>>> > > >> fi
> > > > > >>>> > > >>
> > > > > >>>> > > >> com o comando
> > > > > >>>> > > >> ps h -C <nome do serviço> eu consigo pegar o pid e com
> o
> > > > > comando
> > > > > >>>> > > >> ps -eo pid,time eu pego o tempo de execução, mas alguns
> > > > > serviços
> > > > > >>>> nao
> > > > > >>>> > tem
> > > > > >>>> > > >> dias(no ar) e eu acabo pegando outra variavel, acho que
> > > > devido
> > > > > a
> > > > > >>>> > posição
> > > > > >>>> > > >> de
> > > > > >>>> > > >> cada atributo.. teria como delimitar o para o time ser
> > > > sermpre
> > > > > >>>> em uma
> > > > > >>>> > > >> coluna.. ou algo quen houvesse um padrao..
> > > > > >>>> > > >>
> > > > > >>>> > > >> se o serviço tiver dia hora minuto segundo funciona
> > > > > >>>> corretamente, mas
> > > > > >>>> > se
> > > > > >>>> > > >> nao tiver dia, ele ja da erro no shell e eu perco as
> > > > > informações
> > > > > >>>> > > >>
> > > > > >>>> > > >> --
> > > > > >>>> > > >> Luiz Sales
> > > > > >>>> > > >> aka redhate
> > > > > >>>> > > >> Certified Zimbra, LPIC-2 e ITIL v2
> > > > > >>>> > > >> Linux User #347508
> > > > > >>>> > > >> aMSN: address@hidden
> > > > > >>>> > > >> Licq: 251384040
> > > > > >>>> > > >>
> > > > > >>>> > > >> [As partes desta mensagem que não continham texto foram
> > > > > >>>> removidas]
> > > > > >>>> > > >>
> > > > > >>>> > > >>
> > > > > >>>> > > >>
> > > > > >>>> > > >
> > > > > >>>> > > >
> > > > > >>>> > > >
> > > > > >>>> > > > --
> > > > > >>>> > > > Marcelo Neto
> > > > > >>>> > > > (85) 8886.5730
> > > > > >>>> > > > Fortaleza - Brasil
> > > > > >>>> > > >
> > > > > >>>> > >
> > > > > >>>> > >
> > > > > >>>> > >
> > > > > >>>> > > --
> > > > > >>>> > > Marcelo Neto
> > > > > >>>> > > (85) 8886.5730
> > > > > >>>> > > Fortaleza - Brasil
> > > > > >>>> > >
> > > > > >>>> > >
> > > > > >>>> > > [As partes desta mensagem que não continham texto foram
> > > > removidas]
> > > > > >>>> > >
> > > > > >>>> > >
> > > > > >>>> > >
> > > > > >>>> > > ------------------------------------
> > > > > >>>> > >
> > > > > >>>> > > ----------------------------------------------------------
> > > > > >>>> > > Esta lista não admite a abordagem de outras liguagens de
> > > > > >>>> programação,
> > > > > >>>> > como
> > > > > >>>> > > perl, C etc. Quem insistir em não seguir esta regra será
> > > > moderado
> > > > > >>>> sem
> > > > > >>>> > > prévio aviso.
> > > > > >>>> > > ----------------------------------------------------------
> > > > > >>>> > > Sair da lista:
> address@hidden
> > > > > >>>> > > ----------------------------------------------------------
> > > > > >>>> > > Esta lista é moderada de acordo com o previsto em
> > > > > >>>> > > http://www.listas-discussao.cjb.net
> > > > > >>>> > > ----------------------------------------------------------
> > > > > >>>> > > Servidor Newsgroup da lista: news.gmane.org
> > > > > >>>> > > Grupo: gmane.org.user-groups.programming.shell.brazil
> > > > > >>>> > >
> > > > > >>>> > > Links do Yahoo! Grupos
> > > > > >>>> > >
> > > > > >>>> > >
> > > > > >>>> > >
> > > > > >>>> >
> > > > > >>>> > --
> > > > > >>>> > Luiz Sales
> > > > > >>>> > aka redhate
> > > > > >>>> > Certified Zimbra, LPIC-2 e ITIL v2
> > > > > >>>> > Linux User #347508
> > > > > >>>> > aMSN: address@hidden
> > > > > >>>> > Licq: 251384040
> > > > > >>>> >
> > > > > >>>> > [As partes desta mensagem que não continham texto foram
> > > removidas]
> > > > > >>>> >
> > > > > >>>> >
> > > > > >>>> >
> > > > > >>>>
> > > > > >>>>
> > > > > >>>> [As partes desta mensagem que não continham texto foram
> > removidas]
> > > > > >>>>
> > > > > >>>>
> > > > > >>>>
> > > > > >>>> ------------------------------------
> > > > > >>>>
> > > > > >>>> ----------------------------------------------------------
> > > > > >>>> Esta lista não admite a abordagem de outras liguagens de
> > > > programação,
> > > > > >>>> como perl, C etc. Quem insistir em não seguir esta regra será
> > > > > moderado sem
> > > > > >>>> prévio aviso.
> > > > > >>>> ----------------------------------------------------------
> > > > > >>>> Sair da lista: address@hidden
> > > > > >>>> ----------------------------------------------------------
> > > > > >>>> Esta lista é moderada de acordo com o previsto em
> > > > > >>>> http://www.listas-discussao.cjb.net
> > > > > >>>> ----------------------------------------------------------
> > > > > >>>> Servidor Newsgroup da lista: news.gmane.org
> > > > > >>>> Grupo: gmane.org.user-groups.programming.shell.brazil
> > > > > >>>>
> > > > > >>>> Links do Yahoo! Grupos
> > > > > >>>>
> > > > > >>>>
> > > > > >>>>
> > > > > >>>
> > > > > >>>
> > > > > >>> --
> > > > > >>> Luiz Sales
> > > > > >>> aka redhate
> > > > > >>> Certified Zimbra, LPIC-2 e ITIL v2
> > > > > >>> Linux User #347508
> > > > > >>> aMSN: address@hidden
> > > > > >>> Licq: 251384040
> > > > > >>>
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >> --
> > > > > >> Luiz Sales
> > > > > >> aka redhate
> > > > > >> Certified Zimbra, LPIC-2 e ITIL v2
> > > > > >> Linux User #347508
> > > > > >> aMSN: address@hidden
> > > > > >> Licq: 251384040
> > > > > >>
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Luiz Sales
> > > > > > aka redhate
> > > > > > Certified Zimbra, LPIC-2 e ITIL v2
> > > > > > Linux User #347508
> > > > > > aMSN: address@hidden
> > > > > > Licq: 251384040
> > > > > >
> > > > >
> > > > > --
> > > > > Luiz Sales
> > > > > aka redhate
> > > > > Certified Zimbra, LPIC-2 e ITIL v2
> > > > > Linux User #347508
> > > > > aMSN: address@hidden
> > > > > Licq: 251384040
> > > > >
> > > > > [As partes desta mensagem que não continham texto foram removidas]
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > [As partes desta mensagem que não continham texto foram removidas]
> > > >
> > > >
> > > >
> > > > ------------------------------------
> > > >
> > > > ----------------------------------------------------------
> > > > Esta lista não admite a abordagem de outras liguagens de programação,
> > > como
> > > > perl, C etc. Quem insistir em não seguir esta regra será moderado sem
> > > > prévio aviso.
> > > > ----------------------------------------------------------
> > > > Sair da lista: address@hidden
> > > > ----------------------------------------------------------
> > > > Esta lista é moderada de acordo com o previsto em
> > > > http://www.listas-discussao.cjb.net
> > > > ----------------------------------------------------------
> > > > Servidor Newsgroup da lista: news.gmane.org
> > > > Grupo: gmane.org.user-groups.programming.shell.brazil
> > > >
> > > > Links do Yahoo! Grupos
> > > >
> > > >
> > > >
> > >
> > > --
> > > Luiz Sales
> > > aka redhate
> > > Certified Zimbra, LPIC-2 e ITIL v2
> > > Linux User #347508
> > > aMSN: address@hidden
> > > Licq: 251384040
> > >
> > > [As partes desta mensagem que não continham texto foram removidas]
> > >
> > >
> > >
> >
> >
> > [As partes desta mensagem que não continham texto foram removidas]
> >
> >
> >
> > ------------------------------------
> >
> > ----------------------------------------------------------
> > Esta lista não admite a abordagem de outras liguagens de programação,
> como
> > perl, C etc. Quem insistir em não seguir esta regra será moderado sem
> > prévio aviso.
> > ----------------------------------------------------------
> > Sair da lista: address@hidden
> > ----------------------------------------------------------
> > Esta lista é moderada de acordo com o previsto em
> > http://www.listas-discussao.cjb.net
> > ----------------------------------------------------------
> > Servidor Newsgroup da lista: news.gmane.org
> > Grupo: gmane.org.user-groups.programming.shell.brazil
> >
> > Links do Yahoo! Grupos
> >
> >
> >
>
> --
> Luiz Sales
> aka redhate
> Certified Zimbra, LPIC-2 e ITIL v2
> Linux User #347508
> aMSN: address@hidden
> Licq: 251384040
>
> [As partes desta mensagem que não continham texto foram removidas]
>
>  
>


[As partes desta mensagem que não continham texto foram removidas]