Re: [Discuss-gnuradio] GNU Radio release 3.6.3 available for download

[Ed Criscuolo]

Mike,

  I've been avidly following this thread, since I recently had to
upgrade (company policy) to OSX 10.8, and I wanted to get my
gnuradio install running again at the 3.6.3 release.

  It looked like things had mostly settled down, so I made sure any
old files were uninstalled, and tried
the steps below, gleaned from this thread, but in the end
there was no executable command "gnuradio-companion" anywhere
to be run.  All that showed up was gnuradio-config-info, even after
reboot.

Any ideas?  $PATH & $PYTHONPATH appear to be set right:

[eds-mac:~] edwardc% echo $PATH
/opt/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/X11R6/bin

[eds-mac:~] edwardc% echo $PYTHONPATH
/opt/local/lib/python2.7/site-packages:/usr/local/lib/python2.7/site-packages
[eds-mac:~] edwardc%


I'm stumped! Even spotlight can't find gnuradio-companion, so something
must have failed, but what?  I got no error messages during the builds.

@(^.^)@  Ed



STEP 1. Downgrade Boost
------------------

bash-3.2$ mkdir tmpboost
bash-3.2$ cd tmpboost/
bash-3.2$ svn co -r 98466 http://svn.macports.org/repository/macports
... svn messages...
bash-3.2$ cd boost
bash-3.2$ sudo port build
... port messages ...
bash-3.2$ sudo port installed boost*
The following ports are currently installed:
  boost @1.50.0_0
  boost @1.52.0_1+no_single+no_static+python27 (active)
bash-3.2$ sudo port
[tmpboost/boost] > activate address@hidden
--->  Computing dependencies for boost
--->  Deactivating boost @1.52.0_1+no_single+no_static+python27
--->  Cleaning boost
--->  Activating boost @1.50.0_0
--->  Cleaning boost
[tmpboost/boost] >

STEP 2. Install uhd
-------------------
[tmpboost/boost] > variants uhd
uhd has the variants:
   debug: Enable debug binaries
   docs: build documentation
   examples: enable examples
   libusb: enable USB support via libusb version 1.0
   manual: build manual
   python26: Build UHD for Python 2.6
     * conflicts with python27
[+]python27: Build UHD for Python 2.7
     * conflicts with python26
   tests: enable tests
   universal: Build for multiple architectures
[tmpboost/boost] > install uhd +libusb +docs +python27 
configure.compiler=llvm-gcc-4.2
... lots of ports messages ...
[tmpboost/boost] > installed boost* 

The following ports are currently installed:
  boost @1.50.0_0
  boost @1.52.0_1+no_single+no_static+python27 (active)

[tmpboost/boost] > activate address@hidden 

--->  Computing dependencies for boost
--->  Deactivating boost @1.52.0_1+no_single+no_static+python27
--->  Cleaning boost
--->  Activating boost @1.50.0_0
--->  Cleaning boost
[tmpboost/boost] >

STEP 3. Install gnuradio
-------------------------
[tmpboost/boost] > variants gnuradio
gnuradio has the variants:
   debug: Enable debug binaries
   docs: Install GNU Radio documentation
   full: Enable all variants except python (and, for next, ctrlport)
     * requires docs grc jack orc portaudio qtgui sdl swig uhd wavelet 
wxgui
   grc: Install GNU Radio Companion
     * requires swig
   jack: Install GNU Radio with support for JACK audio
   orc: Install GNU Radio Volk with support for ORC
   portaudio: Install GNU Radio with support for portaudio audio
   python26: Build GNU Radio using Python 2.6
     * conflicts with python27
[+]python27: Build GNU Radio using Python 2.7
     * conflicts with python26
   qtgui: Install GNU Radio with support for Qt GUI
   sdl: Install GNU Radio with support for SDL-based video
   swig: Install GNU Radio with support for SWIG-base Python bindings
   uhd: Install GNU Radio with support for UHD
   universal: Build for multiple architectures
   wavelet: Install GNU Radio Wavelet component
   wxgui: Install GNU Radio with support for Wx GUI

[tmpboost/boost] > install gnuradio +orc +uhd +docs +grc +jack 
+portaudio +python27 +qtgui +sdl +swig +wavelet +wxgui 
configure.compiler=llvm-gcc-4.2
... Lots of port messages ...
[tmpboost/boost] > installed boost* 


The following ports are currently installed:
  boost @1.50.0_0
  boost @1.52.0_1+no_single+no_static+python27 (active)
[tmpboost/boost] > activate address@hidden 


--->  Computing dependencies for boost
--->  Deactivating boost @1.52.0_1+no_single+no_static+python27
--->  Cleaning boost
--->  Activating boost @1.50.0_0
--->  Cleaning boost
[tmpboost/boost] >

STEP 4. Reboot
--------------