|
From: | Eduardo lavratti |
Subject: | Re: [Paparazzi-devel] drotek 10dof v2 imu |
Date: | Fri, 21 Jun 2013 00:44:40 -0300 |
Felix,
I not useDROTEK. I use a similar board. Same sensors. (mpu6050, hmc5883 as slave, ms5611) Date: Fri, 21 Jun 2013 05:33:49 +0200 From: address@hidden To: address@hidden Subject: Re: [Paparazzi-devel] drotek 10dof v2 imu Hi, the magnet sensor is connected to the i2c port of the mpu6050. We have them running with the raspberry pi. The IMU works fine and is with 29 Euros cheap. Heinrich hendrixgr . schrieb:
_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel |
[Prev in Thread] | Current Thread | [Next in Thread] |