Re: [avr-chat] LCD corruption

[Alan Kilian]

On Tue, 2005-09-27 at 22:29 +0530, Royce Pereira wrote:
> ... the LCD gets corrupted when the valves switch on.

    Royce,

        I've seen a similar thing on a MiniRobominds board, and fixed it
        by adding a "pull-to-inactive" resistor on the "E" line right at
        the LCD. (I can't remember if it was a pullup or a pulldown).

        You might want to try that.

                                -Alan

-- 
- Alan Kilian <kilian(at)bobodyne.com>