Re: [avr-chat] how to connect USBasp to attiny2313

[YuGiOhJCJ Mailing-List]

On Fri, 02 Aug 2013 08:23:16 -0400
Ormund Williams <address@hidden> wrote:

> On Fri, 2013-08-02 at 09:53 +0200, YuGiOhJCJ Mailing-List wrote:
> > This is the result of the command:
> > $ sudo avrdude -v -B 50 -p t2313 -c usbasp -U flash:w:main.hex
> > avrdude: Version 5.11, compiled on Jul 26 2013 at 17:11:14
> >          Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
> >          Copyright (c) 2007-2009 Joerg Wunsch
> > 
> >          System wide configuration file is "/usr/etc/avrdude.conf"
> >          User configuration file is "/home/spierre/.avrduderc"
> >          User configuration file does not exist or is not a regular file, 
> > skipping
> > 
> >          Using Port                    : /dev/parport0
>                                            ^
> Problem is here----------------------------|
> 
> I think you need to add the switch that tells avrdude which port the
> usbasp is connected to, so change your command from this:
> 
>   $ sudo avrdude -v -B 50 -p t2313 -c usbasp -U flash:w:main.hex
> 
> to this:
> 
>   $ sudo avrdude -v -B 50 -p t2313 -c usbasp -P usb -U flash:w:main.hex
> 
> 
> Regards.
> 
> -- 
> Ormund
> 
> 
> _______________________________________________
> AVR-chat mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/avr-chat


$ sudo avrdude -v -B 50 -p t2313 -c usbasp -P usb -U flash:w:main.hex

avrdude: Version 5.11, compiled on Jul 26 2013 at 17:11:14
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/usr/etc/avrdude.conf"
         User configuration file is "/home/spierre/.avrduderc"
         User configuration file does not exist or is not a regular file, 
skipping

         Using Port                    : usb
         Using Programmer              : usbasp
         Setting bit clk period        : 50.0
         AVR Part                      : ATtiny2313
         Chip Erase delay              : 9000 us
         PAGEL                         : PD4
         BS2                           : PD6
         RESET disposition             : possible i/o
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                 
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  
MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- 
----- ---------
           eeprom        65     6     4    0 no        128    4      0  4000  
4500 0xff 0xff
           flash         65     6    32    0 yes      2048   32     64  4500  
4500 0xff 0xff
           signature      0     0     0    0 no          3    0      0     0    
 0 0x00 0x00
           lock           0     0     0    0 no          1    0      0  9000  
9000 0x00 0x00
           lfuse          0     0     0    0 no          1    0      0  9000  
9000 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  9000  
9000 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  9000  
9000 0x00 0x00
           calibration    0     0     0    0 no          2    0      0     0    
 0 0x00 0x00

         Programmer Type : usbasp
         Description     : USBasp, http://www.fischl.de/usbasp/

avrdude: set SCK frequency to 16000 Hz
avrdude: warning: cannot set sck period. please check for usbasp firmware 
update.
avrdude: error: programm enable: target doesn't answer. 1 
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.


avrdude done.  Thank you.